• Journal of Energy Engineering
• /
• v.18 no.1
• /
• pp.69-73
• /
• 2009

The regulations for exhaust emission from vehicles have become much more stringent in recent years. These more stringent regulations require vehicle manufacturers to develop alternative fuels that reduce exhaust emission. This research is to analyze the characteristics of exhaust gas emission of same level vehicles that use gasoline, diesel, and LPG fuels. As for the test mode, we used the CVS-75 mode, which is the driving mode of the current domestic and North American emissions. The characteristics of the exhaust gas emitted under this driving condition was studied. We examined the emissions of THC, CO, and NOx of vehicles that use gasoline, diesel, and LPG fuels. As a result, vehicle exhaust gas emissions increased 9.8 % for vehicles using gasoline and it decreased 12.2 % for diesel-powered vehicles compared to vehicles using LPG fuel. Using gasoline and LPG fuel in the CVS-mode, over 80 % of THC and CO emission was produced for the cold start Phase 1.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2007.11a
• /
• pp.57-64
• /
• 2007

Metabolic interactions of the three major cannabinoids, ${\Delta}^9$-tetrahydrocannabinol (THC), cannabidiol (CBD), and cannabinol (CBN) with steroid hormones were investigated. These cannabioids concentration-dependently inhibited $3{\beta}$-hydroxysteroid dehydrogenase and $17{\alpha}$-hydroxylase in rat adrenal and testis microsomes. CBD and CBN were the most potent inhibitors of $3{\beta}$-phydroxysteroid dehydrogenase and progesterone $17{\alpha}$-hydroxylase, respectively, in rat testis microsomes. Three cannabinoids highly attenuated hCG-stimulated testosterone production in rat testicular interstitial cells. These cannabinoids also decreased in levels of mRNA and protein of StAR in the rat testis cells. These results indicate that the cannabinoids could interact with steroid hormones, and exert their modulatory effects on endocrine and testicular functions. Metabolic interaction of a THC metabolite, $7{\beta}$-hydroxy-${\Delta}^8$-THC with steroids is also investigated. Monkey liver microsomes catalyzed the stereoselective oxidation of $7{\beta}$-hydroxy-${\Delta}^8$-THC to 7-oxo-${\Delta}^8$-THC, so-called microsomal alcohol oxygenase (MALCO). The reaction is catalyzed by CYP3A8 in the monkey liver microsomes, and required NADH as well as NADPH as an efficient cofactor, and its activity is stimulated by some steroids such as testosterone and progesterone. Kinetic analyses revealed that MALCO-catalyze reaction showed positive cooperativity. In order to explain the metabolic interaction between the cannabinoid metabolite and testosterone, we propose a novel kinetic model involving at least three binding sites for mechanism of the metabolic interactions.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.463-469
• /
• 2021

Bioactivities of curcumin, a major pigment of Curcuma longa L., have been widely investigated. In this study, the antioxidant and cytotoxic properties of curcumin and its analogs including ferulic acid, dibenzoylmethane (DBM), and tetrahydrocurcumin (THC), and their structure-activity relationships were assessed. Ferulic acid, THC, and curcumin showed strong scavenging activities against several radicals and exhibited considerable lipid peroxidation inhibitory activity. Curcumin showed the strongest cytotoxic activities against HeLa, HCT-116, IEC-6 and INT 407 cells, whereas ferulic acid did not show any cytotoxic effect up to 100 µM against these cell lines. Cytotoxicity of curcumin and THC was significantly enhanced by superoxide dismutase and diminished by N-acetylcysteine. The combination treatment of curcumin and ferulic acid enhanced the cytotoxicity, whereas the combination of curcumin and DBM offset their toxicity. These results suggest that methoxy phenolic and β-diketon moieties are crucial for the antioxidant- and cytototoxic activities of curcumin, respectively.

• Journal of East Asia Management
• /
• v.4 no.1
• /
• pp.53-77
• /
• 2023

Modern company faces an uncertain future and a competitive environment and are seeking new technologies and creative products to ensure the corporate growth and survival in the market through continuous innovation. "University Industry Cooperation(UIC)" is a point of contact for overcoming the crisis faced by companies and universities in this era and a cooperation platform for mutual prosperity. As a subsidiary of a university, "Technology Holding Company(THC)" is attracting attention as a new window for UIC in Korea. The role of THC is to establish and foster the business opportunities of their subsidiaries and to return investment profits to the university ecosystem again. But recently, the life cycle of technology is getting shorter, and the development cost is steadily increasing. In particular, with the increase of hybrid projects based on convergence and combination, the risk of conducting research(R&D) and new product development(NPD) projects is gradually increasing. A PMO refers to a project management organization that can contribute to improving the success rate of projects with increasing uncertainty by supporting project visibility and appropriate decision-making. The purpose of this study is to raise a research question on whether THC's corporate performance can be improved when "Project Management System(PMO Service)" is introduced into the subsidiary incubation system of THC. This study proposes several research methods to identify the relationship between the introduction of PMO and the corporate performance of THC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.3
• /
• pp.516-521
• /
• 2004

In this paper, the effects of ethanol blended gasoline on emissions and their catalytic conversion efficiencies characteristics were investigated in gasoline engine with an electronic fuel injection. The results showed that the increase of ethanol concentration in the blended fuels brought the reduction of THC and $CO_2$ emissions from the gasoline engine. THC emissions were drastically reduced up to thirty percent. And brake specific fuel consumption was increased. but brake specific energy consumption was similar level. However. unburned ethanol and acetaldehyde emissions increased. The conversion efficiency of Pt/Rh based three-way catalysts and the effect of ethanol on CO and NOx emissions were investigated by the change of engine speed. load and air/fuel ratio. Furthermore, the ethanol blended fuel results in the reduction effect of THC. CO and NOx emissions at idle speed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.3
• /
• pp.210-216
• /
• 1984

An investigation of the effects of the size of mixing region determined by changing the position of fuel injection has been carried out. Measurements were made: the distribution of temperature and concentration profiles of the stable gas species, nitrogen oxide and total hydrocarbon in the flames. The results of this investigation show that variations of the size of mixing region produce major changes to the three type flow fields which significantly influence pollutant (NO, CO and THC) formation and energy release.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.3
• /
• pp.215-220
• /
• 1997

CNG dual fuel engine for heavy duty diesel engine developed by AFS International in Canada has been equipped to a Korean city bus engine and tested to compare the engine performance and the emission characteristics with the existing diesel fueled engine. Also the dual-fuel engine was applied to the city bus for road test. The results are summarized as follows. Performance optimization has been carried out to have engine power equivalent to or better than the diesel fueled engine. Smoke is decreased by 85% by Korean smoke 3 mode test. By 13 mode test CO is increased by 453% and THC is increased by 2, 086%. NOx is decreased by 7% in laboratory. D-13 test mode was changed in 1996 Korean regulation. Even though THC is increased very much, it's not too serious problem since CO and HC emission of diesel engine is very little compared to gasoline engine and more than 75% of THC is CH$_4$. But the reduction technologies of CO and HC has to be considered.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.3
• /
• pp.187-190
• /
• 2006

In order to produce hemp with low cannabinoids and appropriate fiber yield, seeds of the IH3 (non drug type germplasm) and local variety (drug type cultivar) were mixed to 1:1, 2:1, 3:1 on base of seed weight ratio and cultivated for seed production. In the seed yield trial, the weight of 1000 grains were around 21 g, which was increased in proportion to the ratio of IH3 seeds but seed yield were 100 kg/10a, which were not significantly different by the seeds-mixing ratio. In fiber yield trials with seeds from seed yield trial, fiber yield ranged $193{\sim}198kg/10a$ which was not significantly different by the seeds mixing ratio but the content of THC(${\Delta}$-9-tetrahydrocannabinol) was lowered in proportion to the ratio of IH3 seeds. Variation of THC and CBD (Cannabidiol) level in the 150 plant cultivated with various seed mixing ratio reflected that the percentage of drug and intermediate type were decreased but non drug type were increased in proportion to the ratio of IH3 seeds.

• Resources Recycling
• /
• v.6 no.2
• /
• pp.22-28
• /
• 1997

In recent yean thc problem of wastc plastics arc greatly incrcascd with ihe result uf lndushial growth. As a rcsult the amount of wastc plaslics in domestic area is appraxhnately 2,300,000 t<~nin 1996 base and contmuously increasing more than 12% cvcry ycar. Thc disposal way of these waste plastics arc dlLl malnly rely~ng on landill1 or partially incinuralion So that it hss become a senous social problem due to the second envirnmentd pollution. The tcchnologics iar prducing oil from the waste plastics have hccn dcvelopcd far along pennd and currently some of them are in a commercialiration stage Pyrolysis process in one of the major process m heating waslc plaslics bul still has some restlichons for the cammcrc~dizatian duc lo 11s emnom~cal problems assaciated with a systcmiltlc lecd collcctionidispnsJ ways. Cansldenng cnvaomcnld problems, thc inclease m the charge for waste matcds trcatmcnt and thc lmlitarion ni disposal area, it is inteicstcd that the wastc plastics treabncnt by pyrolysn. which would be the safest and the most eilic~ent process for cnnvcrting fecd wastc to rc-usablc rcsourccs. would he predomhant m ihe near h~lurc Thc shldy aims inr the development of haslc ted~nolagy for scaling up to a com~nercial sire through pyrolys~s process which is cnnduclcd under the absence of air. Furthern~orc the waste plastics can be recycled as iual gas or oil wilhout harmful effects in enviroment, The waste w e d plastics arc pyrolyzed in (he fluidized bcd rcaclor under continuous way and thc ail ylcld gives approx~marcly 47 4%.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.244-245
• /
• 2008