• Nutrition Research and Practice
• /
• 제9권1호
• /
• pp.99-105
• /
• 2015

BACKGROUND/OBJECTIVES: Compelling evidence indicates that consumption of trans-fatty acids (TFA) is associated with a wide range of diseases. However, few validated tools for TFA intake assessment are available in Korea. We aimed to validate a food frequency questionnaire (FFQ) estimating usual intake of TFA in Korean adults. MATERIALS/METHODS: Eighty-two healthy adults completed an FFQ with a 3-day diet record (3DDR), and 58 completed a second FFQ at a 1-month interval. To assess the reproducibility of the FFQ, we compared estimated TFA intakes from each FFQ. To assess the validity, we compared estimates from the FFQ with those from the 3DDR. RESULTS: The FFQ was reproducible (Spearman r = 0.71) and provided modest correlations with the 3DDR (Spearman r = 0.38). After adjustment for total energy intake, the correlations increased (r = 0.45). Measurement-error correction also de-attenuated the correlations (r = 0.57). When quintiles of the FFQ and 3DDR were joint-classified, 9% on average were misclassified into extreme quintiles. CONCLUSIONS: Our findings suggest that the developed FFQ is reproducible and reasonably valid in categorizing individuals according to TFA intakes among healthy young and middle aged adults in Korea.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.77-82
• /
• 2005

We report a successful fabrication of high-quality $SmBa_{2}Cu_{3}O_{7-{\delta}}$ (SmBCO) thin films on $LaAlO_3$(LAO)(100) single crystalline substrates by a modified TFA-MOD method. After the pyrolysis heat treatment of spin-coated films up to $400^{\circ}C$, SmBCO films were fired at various temperatures ranging from 810 to $850^{\circ}C$ in a reduced oxygen atmosphere (10 ppm $O_2$ in Ar). Optimally processed SmBCO films exhibited the zero-resistance temperature ($T_{c,zero}$) of 90.2 K and the critical current density ($J_c$) of $0.8\;MA/cm^2$ at 77K in self-field. Compared with the $J_c$ values (normally, > $2\;MA/cm^2$ at 77 K) of MOD-TFA processed YBCO films, rather depressed $J_c$ values in SmBCO films are most probably attributed to the existence of ${\alpha}$-axis oriented grains.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.33-34
• /
• 2006

The effects of Ba and Ce addition has been investigated in YBCO prepared by trifluoroacetate (TFA) metalorganic depostition (MOD) method. Precursor solutions with cation ratios of Y:Ba:Cu:Ce = 1:2+x:3:x (x = 0, 0.05, 0.1 and 1.5) have been prepared by adding an excess amount of cerium and barium. Coated film was calcined at lower temperature and conversion heat treatment at temperature of $780{\sim}810^{\circ}C$. It has been shown that the critical current (Ic) of YBCO film was degraded by doping of Ba and Ce atoms. But Ic was increased as the amount of doped Ba and Ce content increased from 5 % to 15 %. It was observed that there was little increase of a flux pinning force with Ba and Ce addition in YBCO film prepared by TFA-MOD process.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.87-89
• /
• 2003

YBa$_2$Cu$_3$$O_{7-x}$ thin films were fabricated by MOD-TFA process via dipping method on LaAlO$_3$(LAO) single crystalline substrates. In this study, we investigated effect of solvent on the microstructure and crystallinity of YBCO thin films. The YBCO films derived from solvent with low boiling point has good surface morphologies.s.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.80-83
• /
• 2003

Superconducting YBCO thin films are fabricated on single-crystalline substrates by Metallo-organic Depostion process employing Trifluoroacetic acid as a chelating agent (MOD-TFA). (100)-oriented single crystalline LaAlO$_3$ substrates were employed to grow superconducting film with high crystallinity. The fully processed YBCO thin films were characterized with XRD, SEM, EDS, etc. The microstructures of YBCO thin films show labyrinth-like patterns. The origin of this microstructure was delineated by compositional inhomogeneity during the MOD process and it was shown that the microstructure may be modified by additives. In this work, effects of additives on the microstructures and electrical properties of YBCO thin films have been investigated.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.84-87
• /
• 2003

$YBa_2$$Cu_3$$O_{7-x}$ (YBCO) thin films were fabricated by MOD-TFA process via dip-coating method on LaAlO$_3$, (LAO) single crystalline substrates. In this study, we investigated effect of annealing temperature and solvent on the microstructure and texture of YBCO thin films. The precursor films were annealed at various temperature to improve surface morphologies and phase purities. It was shown that the films annealed at relatively lower and higher temperature exhibit low phase purity and crystallinity. The effect of various solvents on surface morphologies and second phase has been investigated.

• Journal of Dairy Science and Biotechnology
• /
• 제27권2호
• /
• pp.25-36
• /
• 2009

Trans fatty acids (TFAs), especially elaidic acid, formed during partial hydrogenation of vegetable oils have been shown to increase LDL-cholesterol (LDL-C) and decrease HDL-cholesterol (HDL-C), thereby increasing the LDL-C/HDL-C ratio and elevating the risk of cardiovascular disease. However, studies on the health effects of ruminant TFAs have suggested that these TFAs, which are primarily vaccenic acids, have no or inverse association with coronary heart disease. Thus, dietary recommendations or legislation for TFAs should consider the differences in the physiological effects of TFAs derived from various food sources. This present review recapitulates the progress in TFA research by analyzing recent epidemiological studies or intervention studies and comparing the cardiovascular health effects of industrially produced TFA and ruminant TFA.

• 공업화학
• /
• 제8권1호
• /
• pp.39-48
• /
• 1997

카본전극을 이용한 양극산화을 통해 1,1-Bis-(3,4-dimethoxyphenyl)ethane으로부터 $CH_3CN$이나 $CH_2Cl_2/TFA$-혼합용액계에서 Intramolecular cyclizatlon 반응이 일어났다. Intramolecular cyclization에 의한 생성물(9-methyl-2,3,6,7-tetramethoxyfluorene)은 출발물질보다 더 쉽게 산화되고, 그에 따른 산화생성물은 $CH_3CN$계에서 불안정하여 낮을 수율을 나타냈다. TFA가 존재하는 계에서는 Fluorene 유도체의 산화생성물인 radical cation이 안정하여 환원 후에 더 좋은 수율로 합성할 수 있었다.

• Applied Microscopy
• /
• 제47권1호
• /
• pp.29-35
• /
• 2017

Transverse magnetic field annealing (TFA) was carried out on $Fe_{73.5}Cu_1Nb_3Si_{15.5}B_7$ nano-crystalline magnetic core with the aim at decreasing coercivity ($H_c$) while keeping high inductance ($L_s$). The magnetic field generated by direct current (DC) was applied on the magnetic core during different selected annealing stages and it was proved that the nanocrystalline magnetic core achieved lowest $H_c$ when applying transverse field during the whole annealing process (TFA1). Although the microstructure and crystallization degree of the nanocrystalline magnetic core exhibited no obvious difference after TFA1 compared to no field annealing, the TFA1 sample showed a more uniform nanostructure with a smaller mean square deviation of grain size distribution. $H_c$ of the nanocrystalline magnetic core annealed under TFA1 decreased along with the increasing magnetic field. As a result, the certain size nanocrystalline magnetic core with low $H_c$ of 0.6 A/m, low core loss (W at 20 kHz) of 1.6 W/kg under flux density of 0.2 T and high $L_s$ of $13.8{\mu}H$ were obtained after TFA1 with the DC intensity of 140 A. The combination of high $L_s$ with excellent magnetic properties promised this nanocrystalline alloy an outstanding economical application in high frequency transformers.

• Restorative Dentistry and Endodontics
• /
• 제42권3호
• /
• pp.224-231
• /
• 2017

Objectives: To determine the actual revolutions per minute (rpm) values and compare the cyclic fatigue life of Reciproc (RPC, VDW GmbH), WaveOne (WO, Dentsply Maillefer), and TF Adaptive (TFA, Axis/SybronEndo) nickel-titanium (NiTi) file systems using high-speed camera. Materials and Methods: Twenty RPC R25 (25/0.08), 20 WO Primary (25/0.08), and 20 TFA ML 1 (25/0.08) files were employed in the present study. The cyclic fatigue tests were performed using a dynamic cyclic fatigue testing device, which has an artificial stainless steel canal with a $60^{\circ}$ angle of curvature and a 5-mm radius of curvature. The files were divided into 3 groups (group 1, RPC R25 [RPC]; group 2, WO Primary [WO]; group 3, TF Adaptive ML 1 [TFA]). All the instruments were rotated until fracture during the cyclic fatigue test and slow-motion videos were captured using high-speed camera. The number of cycles to failure (NCF) was calculated. The data were analyzed statistically using one-way analysis of variance (ANOVA, p < 0.05). Results: The slow-motion videos were indicated that rpm values of the RPC, WO, and TFA groups were 180, 210, and 425, respectively. RPC ($3,464.45{\pm}487.58$) and WO ($3,257.63{\pm}556.39$) groups had significantly longer cyclic fatigue life compared with TFA ($1,634.46{\pm}300.03$) group (p < 0.05). There was no significant difference in the mean length of the fractured fragments. Conclusions: Within the limitation of the present study, RPC and WO NiTi files showed significantly longer cyclic fatigue life than TFA NiTi file.