• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.302-306
• /
• 2016

우리나라는 전 국토의 70%가 산지이고 하천경사가 다른 나라에 비해 상대적으로 급하여 홍수 관리에 매우 불리한 조건을 가지고 있으며, 특히 홍수기간의 집중호우 및 돌발홍수는 인명과 재산의 막대한 피해를 입히고 있다. 최근은 기후변화의 영향으로 집중호우 및 돌발홍수는 증가하는 추세에 있다. 이것은 홍수의 위험성 및 자연재해의 발생을 증대시키므로 이에 대한 하천유역 단위의 홍수량 예측 및 재해방지를 위한 설계기법의 개선과 개발, 신뢰성 있는 수문정보 획득을 위한 정밀 수문조사는 매우 필요한 상황이다. 기후변화에 대응하기 위한 수문조사의 방향은 새로운 국면에 접하였다고 볼 수 있다. 기존의 수문조사 방법을 통해 획득했던 수문량의 초과치를 벗어난 극대값의 수문량 관측 및 측정을 극복하는 문제, 홍수량 산정 및 예측을 위한 새로운 설계기법의 개발 또는 기존 방법의 개선 등 문제 해결을 위한 방향이 모색되어야 한다. 이러한 문제점을 해결하기 위해서는 중 소규모 유역 단위를 대상으로 지속적이고 신뢰성 있는 자료의 획득과 축적이 중요하나 시 공간적으로 모두 충족된 수문자료를 획득하기에는 불가능한 일이다. 따라서, 중 소규모 유역 단위의 대표성 있는 Test-bed 유역(설마천 유역/차탄천 유역)의 운영이 요구되며, 이를 통하여 얻어진 수문자료는 상기에 기술한 문제를 해결 가능하게 한다. Test-bed 유역에서 생성되는 수문자료에는 강우량, 하천수위, 지하수위 및 기상 등의 관측자료와 유량측정성과 자료가 있다. 관측된 수문자료를 이용하여 강우-유출량 분석, 증발산량 분석, 지하수함양량 분석 등 기본적인 수문특성을 분석하였다. 홍수량 예측 설계기법 개선으로는 홍수도달시간 산정방법을 검토하였으며, 최대강우강도-도달시간관계를 이용하여 도달시간을 개발하였다. 그리고 RDAPS 예측강우량과 수문모형을 이용하여 홍수량을 예측할 수 있는 시스템을 구축하였다. 유역 단위의 수문조사를 통해 생성된 수문자료는 다양한 분석과 설계에 응용되므로 지속적인 Test-bed 유역의 운영은 매우 필요한 실정이다.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.241-249
• /
• 2022

As for military backpacks in Korea, utility backpack products equipped with various functions along with comfort and convenience are being developed. As a result, the volume and weight of the backpack increase, and many lightweight studies of the materials forming the backpack are being conducted. This study is a basic study on frame lightweight using fiber-reinforced composites to deal with aluminum, a back frame that maintains the shape of a backpack and provides stability when worn by combatants. As is known, only fiber-reinforced composites have sufficient light weight and mechanical properties, but the mechanical properties were reviewed by drilling holes to maximize the light weight. Tensile strength and flexural strength were measured by drilling 6mm, 12mm, 18mm, and 24mm holes, and the tensile strength and flexural strength were measured when 1, 3, 5, and 7 holes of 12mm were increased. As a result, even when the number of holes was increased, tensile strength did not change significantly, and the flexural strength showed to be higher in the case of 3 holes and 5 holes than in the case of 1 hole.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.113-118
• /
• 2023

Maintenance of semiconductor equipment processes is crucial for the continuous growth of the semiconductor market. The process must always be upheld in optimal condition to ensure a smooth supply of numerous parts. Additionally, it is imperative to monitor the status of the robots that play a central role in the process. Just as many senses of organs judge a person's body condition, robots also have numerous sensors that play a role, and like human joints, they can detect the condition first in the joints, which are the driving parts of the robot. Therefore, a normal state test bed and an abnormal state test bed using an aging reducer were constructed by simulating the joint, which is the driving part of the robot. Various sensors such as vibration, torque, encoder, and temperature were attached to accurately diagnose the robot's failure, and the test bed was built with an integrated system to collect and control data simultaneously in real-time. After configuring the user screen and building a database based on the collected data, the characteristic values of normal and abnormal data were analyzed, and machine learning was performed using the KNN (K-Nearest Neighbors) machine learning algorithm. This approach yielded an impressive 94% accuracy in failure diagnosis, underscoring the reliability of both the test bed and the data it produced.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.79-79
• /
• 2023

With the development of digital technology, the size of the smart agriculture market at home and abroad is rapidly expanding. It is necessary to establish a foundation for sustainable precision agriculture in order to respond to the aging of rural areas and labor shortages. This study was conducted to establish an automated digital agricultural test bed for soybean production management using data suitable for agricultural environmental conditions in Korea and to demonstrate the field of leading complexes. In order to manage water smartly, we installed a subsurface drip irrigation system in the upland field and an underground water level control system in the paddy field. Based on data collected from sensors, water management was controlled by utilizing an integrated control system. Irrigation was carried out when the soil moisture was less than 20%. For effective water management, soil moisture was measured at the surface, 15cm, and 30cm depth. The main growth characteristics and yield, such as stem length, number of branches, and number of nodes of the main stem, were investigated during the main growth period. During the operation of the test bed, drought appeared during the early vegetative growth period and maturity period, but in the open field smart agriculture test bed, water was automatically supplied, reducing labor by 53% and increasing yield by 2%. A test bed was installed for each field digital farming element technology, and it is planned to verify it once more this year. In the future, we plan to expand the field digital farming technology developed for leading farmers to the field.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.45-51
• /
• 2007

The various levels of test are performed to verify the correctness, completeness, and quality of the developed flight software. The three main test levels are unit test, integration test and verification test. The flight software unit test is performed on the individual PC environment using target simulator. And integration and verification test is mainly performed on STB(S/W Test Bed) which provides test and debugging environments for flight software on the target board This document is to present the test environment for the next generation low earth orbit satellite flight software development.

• Korean Institute of Interior Design Journal
• /
• v.27 no.1
• /
• pp.80-87
• /
• 2018

This study aims to find gender differences in inpatients' privacy and stress concerns in multi-bed hospital room. In the literature review, we consider the characteristics of multi-bed hospital room and patients' privacy as a psychological environment factor. In the survey research, the questionnaires were used to understand the inpatients' general characteristics and privacy requirements. A total of 109 copies were analyzed through a cross-tabulations and T-test using the SPSS 18.0. Results and conclusions are as follows: (1) In the case of multi-bed room patients, there were some gender differences in privacy and stress, but the differences were limited. (2) There is a difference in the patient 's preference of the hospital room according to gender, and this is related to the privacy characteristic. (3) The social communication and strolling are commonly effective stress relief methods for both men and women, so space is needed to do this methods. The meaning of this study is to specify the privacy and stress of the inpatients in multi-bed patients' room.

• Journal of Korean Society on Water Environment
• /
• v.25 no.2
• /
• pp.306-310
• /
• 2009

Packed-bed reactor for removing ammonia was tested at different loading rates. Nitrifiers for ammonia removing was encapsulated in gel media which consisted of polyethlene glycol, alginate and activated carbon. The removal efficiency was nearly 100% when ammonia loading was $12g/m^3/hr$, and the maximum elimination capacity (EC) achieved on this study was $18g/m^3/hr$. The initial microbial portion of nitrifiers in the media was about 82% and it was increased to more than 90% at the end of the operation. Short-term shock loading test was carried out to survey the stability of the media. The inlet loading rates were varied from 2 to $20g/m^3/hr$. The packed-bed reactor overcame the shock loading i.e. removal efficiency recovered rapidly from about 80% to almost 100% within 6 hrs. The results of Live/Dead cell test showed that nitrifiers maintained there activity in the encapsulated media during the test and also against ammonia shock load.

• Geomechanics and Engineering
• /
• v.10 no.4
• /
• pp.405-422
• /
• 2016

The paper deals with the results of the laboratory cyclic plate load tests performed on the reinforced soft clay beds. The performances of the clay bed reinforced with geocells and geocells with additional basal geogrid cases are compared with the performance of the unreinforced clay beds. From the cyclic plate load test results, the coefficient of elastic uniform compression ($C_u$) was calculated for the different cases. The $C_u$ value was found to increase in the presence of geocell reinforcement. The maximum increase in the $C_u$ value was observed in the case of the clay bed reinforced with the combination of geocell and geogrid. In addition, 3 times increase in the strain modulus, 10 times increase in the bearing capacity, 8 times increase in the stiffness and 90% reduction in the settlement was observed in the presence of the geocell and geogrid. Based on the laboratory test results, a hypothetical case of a prototype foundation subjected to cyclic load was analyzed. The results revealed that the natural frequency of the foundation-soil system increases by 4 times and the amplitude of the vibration reduces by 92% in the presence of the geocells and the geogrids.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.835-842
• /
• 2020

This paper considers a method of reproducing abnormal and fault operation for smart monitoring of thrust bearing used in wave power generation system. In order to develop smart monitoring technology, abnormal and failure data of actual equipment are required. However, it is impossible to artificially break down the actual equipment in operation due to safety and cost. To tackle this problem, a test bed that can secure data through reproduction of a faulty operating environment should be developed. Therefore, in this study, test bed that can reproduce each situation was developed and the operation result was analysis after identifying the situation to be reproduced through the failure factor analysis of the thrust bearing.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.63-72
• /
• 2009

Korean Land Spatialization Program (KLSP) is an R&D program of the National GIS Project for developing ubiquitous GIS technologies under the control of the M inistry of Land, Transport and Maritime Affairs (M LTM). The first program of the KLSP, which lasts from 2006 to 2012, initiated with $132 million of national funds and $42 million of private matching funds. Aiming to develop the 'Innovation of GIS technology for ubiquitous Korean land', the KLSP consists of five core research projects and one research coordination project to practically utilize and commercialize the results of core research projects. The Korean Land Spatialization Group (KLSG) is planning the KLSP Test-Bed for testing, integrating, and exhibiting the KLSP's outcomes. About 40% of the outcomes are related products to geo-sensor and wireless sensor network (W SN). Thus, interoperable, scalable and web accessible frameworks like an OGC SWE (Open Geospatial Consortium Sensor Web Enablement) are mandatory because some of the products must be connected to each other in a KLSG Test-Bed. The main objective of this paper is to introduce the KLSP Test-Bed and the SWE SOS (Sensor Observation Service) prototype, which is developed for interoperable geo-sensor networks of the KLSP.