• 대한토목학회논문집
• /
• 제32권6A호
• /
• pp.411-418
• /
• 2012

이 연구에서는 수치해석 실험을 통하여, 원주방향 관통균열을 갖는 원통형 쉘의 패치보강 전후의 거동에 대한 평가와 다양한 변수에 따른 패치보강 효과를 분석하였다. 해석 모델의 신뢰성을 높이기 위해, h-법 및 p-법에 기초한 모델링, 두 가지 방법이 동시에 고려되었다. 또한 선형탄성파괴역학 개념에 기초하여 에너지 방출률을 산정하기 위해, 등가영역적분법 및 가상균열확장법이 고려되었다. 해석 예제로서, 먼저 연구에서 수행된 h-법 및 p-법 유한요소 모델을 검증하기 위해, 패치 보강전의 인장력을 받는 관통 균열이 있는 쉘 구조물이 해석되었으며, 해석 결과값들과 여러 참고문헌 값들이 비교되었다. 그리고 패치 보강된 원통형 쉘 시스템에서의 접착제 두께, 접착제 전단탄성계수, 패치 두께, 패치 재료, 균열 길이 등의 여러 설계 변수에 대한 민감도 해석이 수행되었다.

• 대한한방내과학회지
• /
• 제41권2호
• /
• pp.141-149
• /
• 2020

Traumatic brain injury, which can be caused by head trauma, can damage the brain, resulting in physical disorders, such as headache, dizziness, and nausea, as well as mental health problems, such as depression, anxiety, memory loss, and personality changes that reduce a person's quality of life. Therefore, it is important to administer the best treatment at the right time. A 57-year-old patient complained of headache and depression after intracranical hemorrhage caused by a traffic accident. These symptoms are considered to be after effects of brain trauma due to increased pressure on the brain. Herbal medicine was prescribed to release internal brain pressure and acupuncture was applied to ease frontal and occipital head muscle tension. Objective scales were conducted at baseline, and at one month, two months, and four months. It was observed that the degree of headache and depression improved after treatment. This study is meaningful in that it found that Korean medicine treatments help alleviate the after effects of traumatic brain injury.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.246-250
• /
• 2003

In this study, two new types of micro-grippers in which micro-fingers are actuated by piezoelectric multi-layer benders and stacks are introduced for the manipulation of micrometer-sized objects. First, we constructed a 3-chopstick-mechanism tungsten gripper, which is composed of three chopsticks: two are designed to grip micro-objects, and tile third is used to help grasp and release the objects through overcoming especially electrostatic force among some surface effects including electrostatic, van der Waals forces and surface tension. Second, a 2-chopstick-mechanism silicon micro-gripper that uses an integrated force sensor to control the gripping force was developed. The micro-gripper is composed of a piezoelectric multilayer bender for actuating the gripper fingers, silicon fingertips fabricated by use of silicon-based micromachining, and supplementary supports. The micro-gripper is referred to as a hybrid-type micro-gripper because it is composed of two main components; micro-fingertips fabricated using micromachining technology to integrate a very sensitive force sensor for measuring the gripping force, and piezoelectric gripper finger actuators that are capable of large gripping forces and moving strokes. The gripping force signal was found to have a sensitivity of 667 N/V. To the design of each of components of both of the grippers. a systematic design approach was applied, which made it possible to establish the functional requirements and design parameters of the micro-grippers. The micro-grippers were installed on a manual manipulator to assess its performance in tasks such as moving micro-objects from one position to a desired position. The experiment showed that the micro-grippers function effectively.

• Journal of Chest Surgery
• /
• 제25권12호
• /
• pp.1508-1515
• /
• 1992

Between 1975 and 1992, forty five patients with trachea stenosis received tracheoplasty for relief of obstruction. The causes of airway problem are brain contusion[19 cases, 40%], cerebrovascular disease[3 cases, 7%], drug intoxication[8 cases, 18%], psychotic problem[2 cases, 4%], trachea tumor[3 cases, 7%], adult respiratory distress syndrome[9 cases, 20%] and direct trauma[1 case, 2%]. Direct causes of trachea stenosis were complications of tracheostomy[36 cases, 80%], complications of nasotracheal intubation[5 cases, 11%], tumor[3 cases, 6%] and trauma[1 case, 2%]. Thirty one patients underwent the sleeve resection and end-to-end anastomosis. Five patients performed a wedge resection and end-to-end anastomosis. Forteen patients received the Montgomery T-tube for relief of airway obstruction. Four patients have done simple excision of granulation tissue. Two, subglottic stenosis patients were received Rethi procedure[anterior division of cricoid cartilage, wedge partial resection of lower thyroid cartilage and Montgomery T-tube molding] and the other subglottic stenosis patient underwent permanent trachea fenestration. Including cervical flexion in all patients postoperatively, additional surgical techniques for obtain tension-free anastomosis were hyoid bone release technique in two cases, and hilar mobilization, division of inferior pulmonary ligament and mobilization of pulmonary vessel at the pericardium were performed in one case. Cervical approach was used in 39 cases, cervicomediastinal in 12 cases and transthoracic in one case. Complications of tracheoplasty were formation of granulation tissue at the anastomosis site[3 cases], restenosis[9 cases], trachea-innominate artery fistula[2 cases], wound infection[2 cases], separation of anastomosis[2 cases], air leakage[3 cases], injury to a recurrent laryngeal nerve[temporary 8 cases, permanent 2 cases] and hypoxemia[1 case]. Surgical mortality for resection with primary reconstruction was 6.7%, with one death due to postoperative respiratory failure and two deaths due to tracheo-innominate artery fistula.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.19-22
• /
• 1995

A biomechanical study was made to demonstrate the superior mechanical performance of the newly designed Miniplate staple to the conventional Coventry staple in high tibial osteotomy(HTO). Using twenty fresh porcine tibiae, the fixational strengh of the two different types of staple in HTO was compared. To minimize the error due to the specimen-to-specimen individuality, the bone mineral density of the tibiae was measured with a bone densitometry (Dual photon absorptionometer, Luner, USA) and those with $0.8\;{\sim}\;1.2\;gm/cm^2$ at the proximal tibia was used in the biomechanical test. Testing was performed on a material testing system (Autogram ET-5, Shimatzu, Japan) with aid of a commercial data processor (IBM 80386/ ASYST). Using two differant loading modes, 'pull-out' and 'push-out', the maximum resistant force required to release the staple from the substrate bone was recorded. In the pull-out test, ten non-osteotomized specimens were used and the staple was pullout by subjecting an axial tension on the head of the staple inserted. While in the pull-out test where ten tibiae osteotomized in the usual way of HTO were used, the staple was not directly loaded. In this testing, as a mimic condition of the natural knee, the distal part of the specimen tibia was pushed horizontally in order for the staple to be pulled out while the proximal tibia was fixed. The pull-out strength of Coventry staple and miniplate staple were found to be $27.88\;{\pm}\;5.12\;kgf$ and $182.47\;{\pm}\;32.75\;kgf$, respectively. The push-out strength of Coventry staple and miniplate staple were $18.40\;{\pm}\;4.47\;kgf$ and $119.95\;{\pm}\;19.06\;kgf$, respectively. The result revealed that miniplate staple had the pull-out/ push-out strength at least fivetimes higher than Coventry staple. Based on the measured data, it was believed that the newly designed miniplate staple could provide much better postoperative fixation in HTO. The postoerative application of long leg casting may not be needed after HTO surgery.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.119-127
• /
• 2010

Recently, we have launched a large-scale articulatory study to investigate how the three-way contrastive stops (i.e., lenis, fortis, and aspirated) in Korean are kinematically expressed (i.e., in terms of articulatory movement characteristics) in various contexts, using a magnetometer (Electromagnetic Articulography). In this paper, we report some preliminary results about how the three-way bilabial series /p,$p^h,p^*$/ produced in /Ca/ context in isolation are kinematically characterized not only during the lip closure but also during the following vocalic articulation. Some important notes could be made from the results. First, the degree of lip constriction (as measured by the lip aperture between the upper and lower lips) was smaller for the lenis /p/ and larger for the fortis/aspirated /$p^*,p^h$/, showing a two-way distinction during the closure. Second, the tongue lowering for the following vowel was more extreme after the lenis /p/ than after the fortis/aspirated /$p^*,p^h$/. Regarding this vocalic articulatory difference in the tongue height, we discussed the possibility that the articulatory tension associated with the fortis/aspirated stops is further reflected in the lingual vocalic movement maintaining the tongue position to a certain level for the following vowel /a/, while the lenis consonant does not impose such articulatory constraints, resulting in more tongue lowering. Finally, the temporal relationship between the release of the stop closure and the lowest tongue position of the following vowel remained constant, suggesting that CV coordination is invariantly maintained across the consonant type. This pattern was interpreted as supporting the view that the consonant and vowel gestures are coordinated in much the same way across languages.

• The Korean Journal of Physiology
• /
• 제29권1호
• /
• pp.61-67
• /
• 1995

The extract of Ginkgo bibloba (EGb) is a complex mixture of natural products from the Ginkgo leaves and clinically used for the treatment of cerebral and peripheral circulatory disturbances due to its combined activity of several vasoactive principles. In this study we investigated the action of EGb and its mechanism in isolated rabbit corporal smooth muscle to evaluate the possibility of using this material as a pharmacoerecting agent. Strips of rabbit corpus cavernosum were mounted in organ chambers to measure isometric tension. EGb began to exert an relaxing effect at 1 mg/ml in the submaximally precontracted muscle strips with phenylephrine $(PHE,\;5{\times}10^{-6}\;M)$; causing concentration-dependent relaxation with maximal effect at $3{\sim}5\;mg/ml$. That relaxation was partially inhibited by removal of the smooth muscle endothelium or by pretreatment with a NO scavenger, pyrogallol $(10^{-4}\;M)$ or the guanylate cyclase inhibitor, methylene blue $(10^{-4}\;M)$. Pretreatment with EGb (3 mg/ml) inhibited PHE- $(5{\times}10^{-6}\;M)$ or KCI- (20 and 40 mM) induced contraction of muscle strip. In calcium-free high potassium solution EGb depressed the basal tone of the depolarized muscle strip and inhibited calcium-induced contraction when $CaCl_2$ $(10^{-4}\;M)$ was added. These results suggest that EGb relaxes rabbit corpus cavernosal smooth muscle through multiple action mechanisms that include increasing the release of nitric oxide from the corporal sinusoidal endothelium, sequestration of intracytosolic calcium, and maybe a hyperpolarizing action.

• The Korean Journal of Physiology
• /
• 제11권2호
• /
• pp.33-39
• /
• 1977

It has been reported that administration of Ginseng powder to the Guinea pig reduces anaphylactic shook induced by horse serum (Lee, 1939). However, Lee et al. (1960) and Paik et al. (1976) have demonstrated that Ginseng increases capillary permeabilites and histamine release from the mast cell. These facts suggest that Ginseng acts directly on the bronchial muscle causing it to dilate. Recently, a number of investigators(Kidakawa & Iwasiro 1963; Takagi et al. 1973) have reported that Ginseng reverses acetylcholine- or histamine- induced contraction in the isolated Guinea pig ileum. We, therefore, undertook the present study to examine if Ginseng relaxes the spasm of bronchial muscle induced by acetylcholine or histamine. We have also attempted to identify the mechanism of the Ginseng effect. Male Guinea Pig was sacrificed by a blow on the head, The trachea was removed and sectioned with scissors into about 12 rings. After the 'C' shaped ring of cartilage was sectioned the one end of ring was tied to the bottom of the incubation bath and the other end was connected to a force transducer (FTO 3C) to record tension on a Polygraph. When the antispasmodic action of Ginseng effect was first examined in the normal trachea which was not treated by the drug. And then the Ginseng effect was tested in the muscle treated by histamine hydrochloride, acetylcholine hydrochloride or barium chloride. The results indicate that Ginseng alcohol extract relaxes the contraction of isolated tracheal muscle induced by histamine $(1{\mu}g/ml{\sim}10{\mu}g/ml)$, acetylcholine $(1{\mu}g/ml{\sim}5{\mu}g/ml)$ and barium chloride (1.5 mg/ml). The mechanism of this action is in Pa.1 due to nonspecific antimuscarinic and antihistaminic effect and in part by predominant action in the adrenergic ${\beta}-receptor$ although the ${\alpha}-receptor$ is also involved. We, therefore, conclude that Ginseng can be act as a bronchodilator.

• 한국재료학회지
• /
• 제3권2호
• /
• pp.197-204
• /
• 1993

Plastic기 복합재료의 파괴거동에 미치는 원공크기오 판폭의 영향을 검토하기 위하여 단축인장시험을 행하였다. 점응력파손조건에서의 특성길이 $d_o$는 원공크기 및 판폭에 의존하며, 이를 기초로 파손강도를 예측하기 위한 수정 점응력 파손조건식을 제안하였다. 이 파손조건의 예측값은 실험값과 잘 일치하였다. 파손 강도는 원공선단의 손상비의 증가에 따라 증가하며, 이는 손상영역의 형성으로 인한 응력완화현상으로 설명되어 진다. 또한 불안정 파괴시의 최대균열길이 $a_c$는 특성길이 $d_o$의 약 2배의 값을 나타낸다. 파괴인성에 대응하는 한계에너지해방율 $G_c$의 변화는 원공선단의 손상영역의 증가에 의한 응력완화가 주요한 원인이라고 할 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2059-2066
• /
• 2018

This study explored the feasibility of utilizing an SWCNT-coated fabric sensor for the development of a wearable motion sensing device. The extent of variation in electric resistance of the sensor material was evaluated by varying the fiber composition of the SWCNT-coated base fabrics, attachment methods, number of layers, and sensor width and length. 32 sensors were fabricated by employing different combinations of these variables. Using a custom-built experimental jig, the amount of voltage change in a fabric sensor as a function of the length was measured as the fabric sensors underwent loading-unloading test with induced strains of 30 %, 40 %, and 50 % at a frequency of 0.5 Hz. First-step analysis revealed the following: characteristics of the strain-voltage curves of the fabric sensors confirmed that 14 out of 32 sensors were evaluated as more suitable for measuring human joint movement, as they yield stable resistance values under tension-release conditions; furthermore, significantly stable resistance values were observed at each level of strain. Secondly, we analyzed the averaged maximum, minimum, and standard deviations at various strain levels. From this analysis, it was determined that the two-layer sensor structure and welding attachment method contributed to the improvement of sensing accuracy.