• Environmental Analysis Health and Toxicology
• /
• 제19권1호
• /
• pp.101-107
• /
• 2004

To ascertain the effects of hair dyeing application on the DNA damage in human lymphocytes, a mixture of permanent black colored hair dye with the same amount of oxidant containing 6% hydrogen peroxide was used. A hair dyeing with contacting the scalp (conventional dyeing) and a hair dyeing with 3 to 4mm away from the scalp (alternative dyeing) were applied to each If young healthy women. Blood was taken from the brachial vein at two sampling times, just before and 6 hours after the hair dyeing, and tail extent moment(TEM) and tail length (TL) were measured by using a comet assay. After dyeing, TL was significantly increased in both conventional dyeing group and alternative dyeing group compared with before dyeing as an average of 47% and 28%, respectively, and TL for conventional dyeing group was higher than alternative dyeing group as an average of 1.2 fold. After dyeing, TEM was significantly increased in both conventional dyeing group and alternative dyeing group compared with before dyeing as an average of 192% and 76%, respectively, and TEM for conventional dyeing group was significantly higher than alternative dyeing group as an average of 1.7 fold. Therefore, alternative dyeing application was induced to lower lymphocyte DNA damage than conventional dyeing application, and TEM was appeared to be a more sensitive tool for the measurement of lymphocyte DNA damage than TL in this study.

• 한국가금학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 1990

닭에서 2배수성 배우자(gametes)의 생성을 통해서 4배수성 태아 생산을 위한 본 실험의 결과는 다음과 같다. 1. 2배수성 정자생산 TEM(Tri -ethyleneme-lamine) 0.37mg을 연속 3일 주사한 후 9일째(최초 TEM처리 후 12일째)에 11%로 가장 높았다. 2. 2배수성 배우자를 유도한 후 수정을 통하여 109개의 수정난 중 4배수성 태아를 3개(2.8%) 관찰할 수 있었다. 3. 4배수성 개체의 유전구조는 정상구조에서 변화가 없이 동일한 염색체가 4장으로 구성된 형태였다.

• 한국세라믹학회지
• /
• 제44권4호
• /
• pp.202-207
• /
• 2007

High-Quality 1-Dimensional InN single crystalline have been grown by Halide Vapor-Phase Epitaxy on the Au catalyst coated Si substrate using the vapor-liquid-solid growth mechanism. We have been grown 1-dimension InN nanowires having controlled the growth conditions for substrate temperature and gases flow rate. The grown InN nanowire of characteristics for morphologies, crystal structure, and element analysis were carried out by SEM, HR-TEM, and EDS respectively. And the defects of InN crystalline were analyzed by indexing of selective area diffraction pattern with attached HR-TEM. We have successfully obtained the defect-free 1-dimensional InN single crystalline nanowire at the atmosphere pressure.

• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.716-723
• /
• 1990

Transmission electron microscopy (TEM) and anger electron microscopy(AES) studies of GaAs/AlxGa1-xAs(x=0.58) quantum wells grown by low pressure metalorganic chemical vapor deposition(LP-MOCVD) are carried out. Isolated quantum well structure having the well width as small as 15 \ulcornerand multiquantum well structure, which consisted of 51 alternating layers with each thickness of 10\ulcorner were suscessfully grown. TEM analyses have shown that their interfaces were almost completely coherent without any structural disorder, alloy clustering and crystal defect. AES depth resolution have shown the compositional periodicity of superlattice structure.

• Applied Microscopy
• /
• 제51권
• /
• pp.8.1-8.7
• /
• 2021

Growing demands for comprehending complicated nano-scale phenomena in atomic resolution has attracted in-situ transmission electron microscopy (TEM) techniques for understanding their dynamics. However, simple to safe TEM sample preparation for in-situ observation has been limited. Here, we suggested the optical microscopy based micro-manipulating system for transferring TEM samples. By adopting our manipulator system, several types of samples from nano-wires to plate-like thin samples were transferred on micro-electro mechanical systems (MEMS) chip in a single step. Furthermore, the control of electrostatic force between the sample and the probe tip is found to be a key role in transferring process.

• Applied Microscopy
• /
• 제29권1호
• /
• pp.67-73
• /
• 1999

분말시료를 epoxy로 포매 (embedding)한 후 ion milling하는 방법으로 TEM 시편을 준비하는 경우에는 시료와 epoxy와의 milling정도의 차이 때문에 좋은 시편을 만들기 어렵다. 이러한 문제점을 극복하기 위해서 포매 물질에 대한 분말시료의 상대 밀도를 높여 주는 방법을 시도하였다. 일반적인 진공법보다는 원심분리기법을 이용하여 포매하는 것이 시료의 밀도를 높일 수 있었다. 또한, 비슷한 크기의 분말의 혼합보다는 서로 다른 크기의 분말을 혼합한 후 원심분리기를 이용하여 포매할 때, 큰 입자들 사이로 작은 입자들이 유입되면서 분말의 밀도가 더욱 높아지는 것을 알 수 있었다. 이렇게 준비된 시료는 ion milling정도의 차이에서 오는 문제점을 크게 줄일 수가 있어 TEM 관찰에 필요한 시편을 얻을 수 있었다. 원심분리기법은 마이크로미터 이하 크기의 구형, 판상 및 침상의 분말시료에서부터 TEM 시편을 준비하는 데에도 매우 효과적임이 드러났다.

• 한국광물학회지
• /
• 제24권4호
• /
• pp.313-320
• /
• 2011

강원도 태백지역에 분포하는 만항층 셰일의 운모류 층상규산염광물입자에 대한 EPMA 및 TEM 연구를 수행하였다. EPMA 분석에 의한 만항층 셰일 내 운모류 층상규산염광물의 평균 화학식은 $K_{1.35}(Fe_{0.18}Mg_{0.03}Al_{3.86})(Si_{6.55}Al_{1.45})O_{20}(OH)_4$이며, 이는 백운모의 이상화학식과 비교하면 층간 양이온인 K의 함량이 낮아서 일라이트에 가까운 조성을 갖는다. X-선 회절 분석에 의하면 만항층 셰일에서 파이로필라이트가 흔히 백운모와 함께 산출된다. TEM 격자상 관찰에 의하여 $10{\AA}$의 백운모와 $9.3{\AA}$의 파이로필라이트 층들이 단일 층 수준에서의 층간 혼합 및 층 내 혼합 현상이 동시에 관찰되었다. EPMA 분석에서 K 함량이 백운모에 비해 낮게 분석된 원인은 이처럼 입자 내에서 백운모와 파이로필 라이트가 밀접하게 공존하기 때문으로 판단된다.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.639-643
• /
• 2008

STATEMENT OF PROBLEM: The degree of conversion may influence the ultimate mechanical and physical properties of provisional crown and fixed partial denture materials. The high levels of the unreacted residual monomer may cause deleterious effect on the properties. PURPOSE: The purpose of this study was to measure the degree of conversion of bis-acrylic based provisional crown and fixed partial denture materials by using an infrared spectroscopic method. MATERIAL AND METHODS: Chemically activated three bis-acrylic based provisional crown and fixed partial denture materials, LuxaTemp [DMG, Hamburg, Germany], fast set TemPhase [Kerr, Orange, CA, USA] and Protemp 3 Garant [3M-ESPE, St Paul, MN, USA], were investigated by Fourier transform infrared spectrometry (FTIR). The FTIR spectra of the materials tested were immediately obtained after mixing. The specimens were stored under dry conditions and at $23^{\circ}C$ for 24 hours, and then the spectra of the materials were also obtained. The degree of conversion (%) was calculated from the spectrum of the absorbance between the aliphatic double bond at 1637 $cm^{-1}$ and the aromatic double bond at 1608 $cm^{-1}$ using the baseline method. The data were statistically analyzed using one-way ANOVA and the multiple comparison Scheffe test at the significance level of 0.05. RESULTS: The mean value and standard deviation of the degree of conversion were 52.5 % ${\pm}$ 1.1 %, 50.3 % ${\pm}$ 0.8 %, and 42.3 % ${\pm}$ 4.9 % for LuxaTemp, Protemp 3 Garant and fast set TemPhase, respectively. There was no significant difference between LuxaTemp and Protemp 3 Garant, whereas there was a statistically difference between Protemp 3 Garant and fast set TemPhase, and LuxaTemp and fast set TemPhase (P < .05). CONCLUSION: The degree of conversion of fast set TemPhase was significantly lower than those of the others. The degree of conversion may be correlated with the rate of polymerization.

• 전자공학회논문지A
• /
• 제28A권11호
• /
• pp.866-873
• /
• 1991

In this paper the electric and magnetic field distributions in a TEM cell used for EMC testing are analyzed numerically. The fields are distorted with the increase of frequency. These distortions are due to higher order modes and resonances and cause the bandwidthe limitations in the uae of TEM cels. The upper frequency is lower modes however, are reflected at some points through the tapered ends of the cell. Higher order modes however, are reflected at some points within the tapered region where it becomes too small to support the modes, The first two TE mode(TE$_{01}$ and TE$_{10}$) cutoff frequencies and the first six TE$_mnp$ resonant ferquencies are identified in a TEM cell (1x0 6x2m,w=0.72m) from field patterns and the results are consistent with others' data. The circumferential wall currents to support resonances are shown. For the large cell it is desired to extend the usable frequency range above the cutoff frequency of the first higher order mode. This study proposes an attempt to expand the frequency bandwidth by a resonance suppression.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1759-1761
• /
• 1996

Md:YAG laser has been used in many applications such as micromachining, nonlinear optical experiments, holography, and rangefinding. These applications quite often require operation of the laser at the $TEM_{00}$ mode since this mode produces the smallest beam divergence, the highest power density, and, hence, the highest brightness. In this study, a pinhole is put between a rod and a half mirror to make the $TEM_{00}$ mode, and then we measured the intensity distribution of the output beam as reducing the diameter of the pinhole from 6mm to 1.5mm. As a result, the optimum size of the pinhole fixed in a resonator to make the $TEM_{00}$ mode was obtained, and we found out that the output beam of the pulsed Nd:YAG laser with a single elliptical cavity has a Gaussian distribution.