• 전기학회논문지
• /
• 제57권8호
• /
• pp.1407-1411
• /
• 2008

In material processing, a laser system with optimal laser parameters has been considered to be significant. Especially, the laser scribing technology is thought to be very important for fabricating DSSC(Dye sensitized solar eel!) modules with good quality. Moreover, the $TEM_{00}$ mode laser beam is the most dominant factor to decide the IPCE(Incident photon to current conversion efficiency) characteristics. In order to get the $TEM_{00}$ mode, a pin-hole is inserted within a simple pulsed Nd:YAG laser resonator. And the spatial field distribution is measured by using three size pin-hole diameters of 2.0, 6.0mm respectively. At that moment, each case has the same laser beam energy by adjusting the discharge voltage and pps(pulse per second). From those results, it is known that the pin-hole size of 2.0mm has the perfect $TEM_{00}$ mode. In addition, at the charging voltage of 1000V, 10pps and the feeding speed of 1.11mm/sec, the SEM photo of FTO(Fluorine-doped tin oxide) thin film layers shows the best scribing trace.

• 한국결정학회지
• /
• 제3권2호
• /
• pp.98-110
• /
• 1992

Si(100) 기판위에 화학 기 장 증착법으로 상압에서 베타 탄화규소(β-SiC) 박막을 성장시키고 증착 조건이 박막의 물성 특히,기판 방향으로의 배향성과 결 정성에 미치는 영향에 대하여 고찰하여 보았다. 원료 가스로 SiH4와 CH4, 전달 가스로 H2를 사용하였다. 성장 온도, 원료 가스의 조성비,전달 가스에 대한 전 체 원료 가스의 비를 변화시키면서,이들 증착조건이 성장된 박막의 물성에 미치는 영향을 SEM, a-step, XRD, Raman Sepctroscopy, TEM 등을 이용하여 분석하였다. Chemical conversion과정을 통하여 SiC 버퍼층을 형성시킬 때 양질의 박막을 얻을 수 있었으며, CH4가SiH4에 대해 과량일때와 온도가 1150℃ 이상 일때 결정성이 좋아짐을 알 수 있었다. 또한, 결정성 이 좋아질수록 기판 방향으로의 배향성이 좋아짐도 관찰되었다. 결정성이 좋은 박막의 TEM분석 결과 성장 초기에 비해 표면으로 갈수록 결정이 커지는 것을 알 수 있었으며, 적층결함 및 쌍정 등의 분포정도는 원료 가스의 조성비와 무관하였다.

• Applied Microscopy
• /
• 제40권1호
• /
• pp.47-51
• /
• 2010

The capability of real-time observation in TEM is quite useful to study dynamic phenomena of materials in a certain variable ambience. In performing the experiment, the choice of video recording program is an important factor to obtain high quality of movie streaming. Window Movie Maker (WMM) is generally recommended as a default video recording program if one uses "DV Capture" function in DigitalMicrograph$^{TM}$ (DM) software. However, the image quality does not often satisfy the condition for high-resolution microscopic analysis since the severe information loss in the final result occurs during the conversion process. As a good candidate to overcome this problem, Virtual-Dub is highly recommended since the information loss can be minimized through the streaming process. In this report, we demonstrated how useful VirtualDub works in a high-resolution movie recording. Quantitative comparison of the information quality between the images recorded by each software, WMM and VirtualDub, was carried out based on histogram analysis. As a result, the image recorded by VirtualDub was improved ~13% in brightness and ~122% in contrast compared with the image obtained by WMM at the same imaging condition. Remarkably, the gray gradation (meaning an amount of information) becomes wider up to ~115% than that of the WMM result.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.98-102
• /
• 2010

목련잎 추출액을 이용하여 Au core-Ag shell 합금 나노입자를 합성하였다. 환원제인 식물잎 추출액을 먼저 $HAuCl_4$ 용액과 반응시키고 다음에 $AgNO_3$ 용액과 반응시켜 금 seed와 은 shell을 형성시켰다. 반응시간에 따른 UV-visible spectroscopy의 변화를 모니터링하여 합금 나노입자의 형성을 관찰하였다. 합성된 합금 나노입자를 transmission electron microscopy(TEM), energy dispersive X-ray spectroscopy(EDS), X-ray photoelectron spectroscopy(XPS) 등으로 특성화 하였다. TEM image로부터 관찰된 합금 나노입자는 삼각형, 오각형, 육각형 등의 평판과 구 구조의 혼합물이었다. EDS와 XPS 분석으로부터 결정된 금/은 합금 나노입자의 원자 은 함량은 각각 34와 65 wt%로 Au core-Ag shell 나노구조가 형성되었음을 알 수 있었다. 이러한 core-shell 형태의 나노구조는 표면 강화 라만 분광 및 생물분자의 고감도 검출 등에 잠재적인 응용이 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.256-259
• /
• 2004

[ $V_2O_5$ ] 나노선의 구조 분석을 위해 STM(Scanning Tunneling Microscopy)과 TEM(Transmission Electron Microscopy)을 이용하여 단일 $V_2O_5$ 나노선의 이미지를 얻었다. $V_2O_5$ 나노선은 상온에서 ammonium metavanadate$(NH_4VO_3)$와 양이온 교환수지$(DOWEX50{\times}8-100)$를 2차 증류수에 섞어 합성하였다. STM 시료는 3-APS(3-aminopropyltriethoxysilane)를 전 처리한 실리콘 기판에 $V_2O_5$ 나노선을 올려 만들었고, TEM 시료는 200 mesh/copper 그리드에 침전시켜 준비하였다. STM과 TEM의 결과로부터 $V_2O_5$ 나노선의 기하학적 단면이 $1.5nm{\times}10nm$에 거의 근사하는 것을 확인하였으며 두 이미지의 비교를 통해 $V_2O_5$ 나노선의 표면상태에 대해 논의하였다.

• Elastomers and Composites
• /
• 제44권1호
• /
• pp.34-40
• /
• 2009

In situ 미니에멀젼 중합으로 실리카/폴리스타이렌 하이브리드 나노복합체를 만들기 위하여 9-데세노 산을 실리카 표면 개질제로 처음 도입하였다. 복합체는 나노크기의 잘 분산된 실리카를 함유하고 있었다. 실리카의 표면 개질 및 폴리스타이렌의 합성 등은 FTIR로 확인하였고 생성 라텍스 중에 존재하는 실리카의 양은 TGA 분석으로 확인하였다. 생성된 하이브리드는 실리카의 양 증가에 따라 유리전이온도가 상승하였다. SEM과 TEM으로 확인한 결과 하이브리드 복합체는 평균 직경이 55 nm 정도로 나타났다. 복합체내의 실리카의 존재는 EDS와 연결된 TEM 등으로 확인되었다.

• 한국미생물·생명공학회지
• /
• 제48권2호
• /
• pp.230-235
• /
• 2020

The global evolution of antibiotic resistance has threatened the efficacy of available treatment options with ravaging impacts observed in developing countries. As a result, investigations into the prevalence of antibiotic resistance and the role of plasmids are crucial. In this study, we investigated the presence and distribution of bla_TEM and gyrA genes, plasmid profiles, and the antimicrobial susceptibility pattern of Salmonella strains isolated from raw meat and stool sources across Niger State, Nigeria. Ninety-eight samples, comprising 72 raw meat and 26 stool samples, were screened for Salmonella spp. The antimicrobial susceptibility of Salmonella isolates to 10 commonly used antimicrobial agents was determined using the KirbyBauer disc diffusion method. Isolates were further analyzed for plasmids, in addition to PCR amplification of beta-lactamase (bla_TEM) and gyrA genes. A total of 31 Salmonella spp. were isolated, with 22 from raw meat (70.97%) and 9 from stool (29.03%). Salmonella spp. with multiple resistance patterns to ceftazidime, cefuroxime, ceftriaxone, erythromycin, ampicillin, cloxacillin, and gentamicin were detected. Ofloxacin and ciprofloxacin were found to be the most effective among the antibiotics tested, with 67.7% and 93.5% susceptible isolates, respectively. Nine (29.03%) isolates harbored plasmids with molecular sizes ranging between 6557 bp and 23137 bp. PCR amplification of gyrA was detected in 1 (3.23%) of the 31 isolates while 28 isolates (90.32%) were positive for bla_TEM. This study shows the incidence of antibiotic resistance in Salmonella isolates and the possible role of plasmids; it also highlights the prevalence of ampicillin resistance in this local population.

• 한국동물위생학회지
• /
• 제32권3호
• /
• pp.227-239
• /
• 2009

At the present study, it was aimed to detect virulence genes and antimicrobial resistance genes among 102 strains of 12 Salmonella serotypes isolated from pigs and cattle. In polymerase chain reaction (PCR), invA was detected from all strains of Salmonella spp., spvC was detected from Salmonella enterica serotype Enteritidis (S. Enteritidis) (100%), S. Bradenburg (75%), and S. Typhimurium (20.4%). Drug resistance related genes of 12 types were detected from all strains. TEM ($bla_{TEM}$) gene was detected from 51 (92.7%) of 55 $\beta$-lactams (54 ampicillin or 1 amoxicillin) resistance strains. 55 (100%) of 55 chloramphenicol resistance strains, 3 (100%) of 3 gentamicin resistance strains and 5 (100%) of 5 kanamycin resistance strains did contain cml, aadB, and aphA1-Iab, respectively. strB (89.9%), strA (88.4%), aadA2 (84.1%) and aadA1 (72.5%) were detected from 69 streptomycin resistance strains. sulII and dhfrXII were detected from 49 (100%) of 49 sulfamethoxazole/trimethoprim resistance strains, but sulI was not detected. tetA (97.9%) and tetB (21.6%) were detected from 97 tetracycline resistance strains. int gene was detected from 58 (56.9%) of 102 strains. 54 S. Typhimurium of 102 Salmonella spp. were attempted to detect drug resistance genes. TEM was detected from 44 (95.7%) of 46 $\beta$-lactams (45 ampicillin or 1 amoxicillin) resistance strains. cmlA was detected from 51 (100%) of 51 chloramphenicol resistance strains. aadA2 (100%), strA (100%), strB (100%), and aadA1 (79.6%) were detected from 54 streptomycin resistance strains. sulII (100%) and dhfrXII (100%) were detected from 49 sulfamethoxazole/trimethoprim resistance strains. tetA was detected from 54 (100%) of 54 tetracycline resistance strains. int gene was detected from 54 (100%) of 54 strains. The major drug resistance pattern and resistance gene profile were ampicillin, chloramphenicol, streptomycin, sulfamethoxazole/trimethoprim and tetracycline (ACSSuT) and TEM, cmlA, aadA1, aadA2, strA, strB, sulII, dhfrXII, tetA and int, respectively.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.17-19
• /
• 2002

Melt textured YBCO superconductors were fabricated by the top seeding method using Sml.8($Sm_{1.8}$ $Ba_{2.4}$ $Cu_{3.4}$$O_{7-Y}$) seed. We investigated the twin structures using the optical microscope, SEM and TEM. The twin structures formed during the tetragonal to orthorhombic transition which occurred at $450^{\circ}C$ in sample oxygen annealing. The twin structures were clearly observed by SEM due to the chemical etching effects. The lengths of twin structures were increased as the oxygenation heat treatment time increased from 1hr to 10hr. We investigated twin structure by TEM. The twin spaces were considered to be related to the oxygen contents. The results suggested an oxygen diffusion model for the formation of the twin lengths.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.339-345
• /
• 2009

The core/shell type structure of the highly crosslinked poly(glycidylmetharylate-co-divinylbenzene) microspheres prepared in the precipitation polymerization in acetonitrile was thoroughly verified by means of swelling, $^1H$ NMR, XPS, TEM and TGA measurements. In the XPS measurement, the higher the GMA content, the higher the oxygen content was observed, implying that the higher content of GMA is observed in the particle surface. The further verification of the core/shell structure of the poly(GMA-co-DVB) particles was carried out using $^1H$ NMR and TEM techniques, resulting in the poly(GMA-co-DVB) particles with the GMA rich-phase and DVB rich-phase. In overall, the poly(GMA-co-DVB) microspheres consist of a highly crosslinked DVB rich-phase in the core and slightly or non-crosslinked GMA rich-phase in the shell part due to the different reaction ratios between two monomers and self-crosslinking density of DVB.