• Korean Journal of Veterinary Research
• /
• v.31 no.1
• /
• pp.89-97
• /
• 1991

For the ultrastructural observation on Babesia gibsoni(B gibsoni), the protozoa were challenged experimentally to splectomized dog. To examine the ultrastructure of the B gibsoni in the erythrocyte, the infected erythrocytes were collected at the cephalic or jugular vein of the dog. The results obtained by TEM(transmission electron microscopy) were as follows; 1. The sizes of protozoa in erythrocytes are $0.92{\pm}0.36{\mu}m{\times}0.67{\pm}0.21{\mu}m$, the sizes of nucleus of the protozoa are $0.55{\pm}0.24{\mu}m{\times}0.38{\pm}0.26{\mu}m$, and sizes of rhoptries in plasma of the protozoa are $0.33{\pm}0.05{\mu}m{\times}0.25{\pm}0.07{\mu}m$, respectively. 2. The tropozoite membrane in the erythrocyte was one, and it's nuclear membrane was made up of double. But the protozoa of initial stage in infected erythrocyte had double clear mambranes, and distinguished from plasma membrane of red blood cell. 3. The mitochondrialike structures covered with two membranes were observed in the protozoa. 4. Mitochondria and vesicles of the reticulocyte were observed near protozoa in the erythrocyte. 5. There are rhoptry, coiled structure and single nucleous in the merozoite. 6. The shape of rhoptry was round or ovoid form and in occasionally, the content of rhoptry was lost partially. 7. There was able to observe the dividing process of the protozoa. 8. Maurer's cleft-like structure was observed.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.7
• /
• pp.879-887
• /
• 2014

Bacteria that mediate the anaerobic oxidation of ammonium (anammox) have been detected in natural ecosystems, as well as various wastewater treatment systems. In this study, sludge from a particular landfill leachate anaerobic treatment system was selected as the incubation seed for anammox microorganism enrichment owing to its possible anammox activity. Transmission electron microscopy observation, denaturing gradient gel electrophoresis analysis, and cloning/sequencing techniques were applied to identify the diversity of anammox microorganisms throughout the incubation. During the early stage of operation, the diversity of anammox microorganisms was similar to the original complex microbes in the seed sludge. However, as incubation time increased, the anammox microorganism diversity within the system that was originally dominated by Candidatus (Ca.) Brocadia sp. was replaced by Ca. Anammoxoglobus propionicus. The domination of Ca. Anammoxoglobus propionicus produced a stable removal of ammonia (70 mg-N/l) and nitrite (90 mg-N/l), and the total nitrogen removal efficiency was maintained at nearly 95%. The fluorescence in situ hybridization results showed that Ca. Anammoxoglobus propionicus was successfully enriched from $1.8{\pm}0.6%$ initially to $65{\pm}5%$ after 481 days of operation. Therefore, the present results demonstrated the feasibility of enriching Ca. Anammoxoglobus propionicus from leachate sludge, even though the original cell count was extremely low. Application of this seldom found anammox organism could offer an alternative to current ammonia-nitrogen treatment.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.483-499
• /
• 1995

Mandibular first molars of the rats were undertaken to observe the radiosensitivity of amelogenesis. Twenty four Sprague-Dawley rats received 396cGy radiation with the MK Cell irradiator using Cs-137, and twenty four rats served as control. They were devided into two groups; Group 1 which received radiation at the 14th day after gestation and group 2 which received radiation at the 19th day after gestation. Light Microscopy and Transmitted Electron Microscopy investigation was undertaken in the group 1 at the 15th, 18th, 20th, 22nd(2 days after birth), and 25th day(5 days after birth) after gestation, and in the group 2 at the 21th(birth day), 22nd(2 days after birth), and 25th(5 days after birth) day after gestation. The following histopathologic findings were obtained. 1. Compared with control group, experimental group showed a delayed formation of enamel and dentin due to slow rate of differentiation of undifferentiated mesenchymal cells. 2. In the experimental groups, the arrangement of the inner enamel epithelium was irregular and there were many vacuoles in the cytoplasm. There were dilated rER and mitochondria, increase of the intercellular space, and loss of the cellular polarity. 3. In the group 1, early enamel without Tomes' process, and early organic matrix was observed at the 25th day after gestation. 4. In the group 2, histopathologic changes were similar to those of the group 1, but the degree of changes was more severe than that of the group 1.

• The Korean Journal of Physiology and Pharmacology
• /
• v.22 no.3
• /
• pp.277-289
• /
• 2018

The exponential increase in the use of mobile communication has triggered public concerns about the potential adverse effects of radiofrequency electromagnetic fields (RF-EMF) emitted by mobile phones on the central nervous system (CNS). In this study, we explored the relationship between calcium channels and apoptosis or autophagy in the hippocampus of C57BL/6 mice after RF-EMF exposure with a specific absorption rate (SAR) of 4.0 W/kg for 4 weeks. Firstly, the expression level of voltage-gated calcium channels (VGCCs), a key regulator of the entry of calcium ions into the cell, was confirmed by immunoblots. We investigated and confirmed that pan-calcium channel expression in hippocampal neurons were significantly decreased after exposure to RF-EMF. With the observed accumulation of autolysosomes in hippocampal neurons via TEM, the expressions of autophagy-related genes and proteins (e.g., LC3B-II) had significantly increased. However, down-regulation of the apoptotic pathway may contribute to the decrease in calcium channel expression, and thus lower levels of calcium in hippocampal neurons. These results suggested that exposure of RF-EMF could alter intracellular calcium homeostasis by decreasing calcium channel expression in the hippocampus; presumably by activating the autophagy pathway, while inhibiting apoptotic regulation as an adaptation process for 835 MHz RF-EMF exposure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.64-64
• /
• 2000

Since its discovery in 1991, the carbon nanotube has attracted much attention all over the world; and several method have been developed to synthesize carbon nanotubes. According to theoretical calculations, carbon nanotubes have many unique properties, such as high mechanical strength, capillary properties, and remarkable electronical conductivity, all of which suggest a wide range of potential applications in the future. Here we report the synthesis in the catalytic decomposition of acetylene at ~65 $0^{\circ}C$ over Ni deposited on SiO2, For the catalyst preparation, Ni was deposited to the thickness of 100-300A using effusion cell. Different approaches using porous materials and HF or NH3 treated samples have been tried for synthesis of carbon nanotubes. It is decisive step for synthesis of carbon nanotubes to form a round Ni particles. We show that the formation of round Ni particles by heat treatment without any pre-treatment such as chemical etching and observe the similar size of Ni particles and carbon nanotubes. Carbon nanotubes were synthesized by chemial vapour deposition ushin C2H2 gas for source material on Ni coated Si substrate. Ni film gaving 20~90nm thickness was changed into Ni particles with 30~90nm diameter. Heat treatment of Ni fim is a crucial role for the growth of carbon nanotube, High-resolution transmission electron microscopy images show that they are multi-walled nanotube. Raman spectrum shows its peak at 1349cm-1(D band) is much weaker than that at 1573cm-1(G band). We believe that carbon nanotubes contains much less defects. Long carbon nanotubes with length more than several $\mu$m and the carbon particles with round shape were obtained by CVD at ~$650^{\circ}C$ on the Ni droplets. SEM micrograph nanotubes was identified by SEM. Finally, we performed TEM anaylsis on the caron nanotubes to determine whether or not these film structures are truly caron nanotubes, as opposed to carbon fiber-like structures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.288-288
• /
• 2013

Lithium-ion battery (LIB) is one of the most important rechargeable battery and portable energy storage for the electric digital devices. In particular, study about the higher energy capacity and longer cycle life is intensively studied because of applications in mobile electronics and electric vehicles. Generally, the LIB's capacity can be improved by replacing anode materials with high capacitance. The graphite, common anode materials, has a good cyclability but shows limitations of capacity (~374 mAh/g). On the contrary, silicon (Si) and germanium(Ge), which is same group elements, are promising candidate for high-performance LIB electrodes because it has a higher theoretical specific capacity. (Si:4200 mAh/g, Ge:1600 mAh/g) However, it is well known that Si volume change by 400% upon full lithiation (lithium insertion into Si), which result in a mechanical pulverization and poor capacity retention during cycling. Therefore, variety of nanostructure group IV elements, including nanoparticles, nanowires, and hollow nanospheres, can be promising solution about the critical issues associated with the large volume change. However, the fundamental research about correlation between the composition and structure for LIB anode is not studied yet. Herein, we successfully synthesized various structure of nanowire such as Si-Ge, Ge-Carbon and Si-graphene core-shell types and analyzed the properties of LIB. Nanowires (NWs) were grown on stainless steel substrates using Au catalyst via VLS (Vapor Liquid Solid) mechanism. And, core-shell NWs were grown by VS (Vapor-Solid) process on the surface of NWs. In order to characterize it, we used FE-SEM, HR-TEM, and Raman spectroscopy. We measured battery property of various nanostructures for checking the capacity and cyclability by cell-tester.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.153-156
• /
• 2012

In this study, two different methods were studied to prepare Pt-Pd catalysts for direct methanol fuel cells in order to enhance the electrochemical efficiency. The catalysts were compared with simultaneously deposited Pt-Pd and sequentially deposited Pt-Pd. The electrocatalysts contained 20 wt% of metal loading on carbon black and 1 : 2 of Pt : Pd atomic ratio. Electrochemical properties of the catalysts were compared by measuring cyclic voltammetries and average sizes and lattice parameters were measured by transmission electron microscopy images and x-ray diffraction. As a result, sequentially deposited Pt-Pd/C catalysts showed better electrochemical properties than those of simultaneously deposited Pt-Pd/C catalysts.

• Korean Journal of Materials Research
• /
• v.29 no.3
• /
• pp.183-188
• /
• 2019

Flexible dye-sensitized solar cells using binder free $TiO_2$ paste for low temperature sintering are developed. In this paste a small amount of titanium gel is added to a paste of $TiO_2$ nanoparticle. Analysis of titanium gel paste prepared at $150^{\circ}C$ shows that it has a pure anatase phase in XRD and mesoporous structure in SEM. The formation of the titanium gel 1-2 nm coated layer is confirmed by comparing the TEM image analysis of the titanium gel paste and the pristine paste. This coating layer improves the excited electron transfer and electrical contact between particles. The J-V curves of the organic binder DSSCs fabricated at $150^{\circ}C$ shows a current density of $0.12mA/cm^2$ and an open-circuit voltage of 0.47 V, while the titanium gel DSSCs improves electrical characteristics to $5.04mA/cm^2$ and 0.74 V. As a result, the photoelectric conversion efficiency of the organic binder DSSC prepared at low temperature is as low as 0.02 %, but the titanium gel paste DSSCs has a measured effciency of 2.76 %.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.107-112
• /
• 2018

Shielding effectiveness (SE) improvement with EMI shield layers fabricated by conformal spray coating system was studied. Silver or Nickel powder filled acrylic resin were sprayed on the samples. We compared the performance with the viscosity of 400 cPs and 100 cPs cases. The thickness range of the coating layer was 20 to 50 um for the silver, 60 to 120 um for the nickel. The shielding effectiveness was measured by ASTM D4935 using coaxial type TEM-cell. The silver-filled resin showed much better performance than that of the nickel-filled resin. The shielding effectiveness increased almost proportional to the thickness of the coating layers until being saturated around 63 dB for the silver-layer or around 34 dB for the nickel-layer. The best performance measured in this study was the shielding effectiveness of 63 dB with $35{\mu}m-thick$ of silver-layer.

• Korean Journal of Materials Research
• /
• v.29 no.9
• /
• pp.519-524
• /
• 2019

Spherical $Li_3V_2(PO_4)_3$ (LVP) and carbon-coated LVP with a monoclinic phase for the cathode materials are synthesized by a hydrothermal method using $N_2H_4$ as the reducing agent and saccharose as the carbon source. The results show that single phase monoclinic LVP without impurity phases such as $LiV(P_2O_7)$, $Li(VO)(PO_4)$ and $Li_3(PO_4)$ can be obtained after calcination at $800^{\circ}C$ for 4 h. SEM and TEM images show that the particle sizes are $0.5{\sim}2{\mu}m$ and the thickness of the amorphous carbon layer is approximately 3~4 nm. CV curves for the test cell are recorded in the potential ranges of 3.0~4.3 V and 3.0~4.8 V at a scan rate of $0.01mV\;s^{-1}$ and at room temperature. At potentials between 3.0 and 4.8 V, the third $Li^+$ ions from the carbon-coated LVP can be completely extracted, at voltages close to 4.51 V. The carbon-coated LVP exhibits an initial specific discharge capacity of $118mAh\;g^{-1}$ in the voltage region of 3.0 to 4.3 V at a current rate of 0.2 C. The results indicate that the reducing agent and carbon source can affect the crystal structure and electrochemical properties of the cathode materials.