• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.2
• /
• pp.119-130
• /
• 2010

Pulmonary toxicity of talc containing tremolite asbestos (TCT) has been studied in term sequential in Sprague-Dawely rats. UICC chrysotile(average diameter 0.03${\mu}m$, average length 2.93${\mu}m$) was applied as the positive control. TCT was analyzed for its physicochemical properties by transmission electron microscope equipped with energy dispersive X-ray spectrometer(TEM-EDS). The effects of 2mg TCT(talc average diameter 9.7${\pm}$8.4${\mu}m$; tremolite average diameter 1.6${\pm}$1.6${\mu}m$, average length 10.8${\pm}$7.0${\mu}m$) on pathological changes were evaluated after 1, 8 weeks instilled into rat lungs. 2mg Chrysotile continuously affected lung pathological changes. Inflammation and granuloma response broke out from 1 week after instilled with chrysotile and the pathological examination further showed increased legions of lung after 8 weeks. But TCT did not showed lung pathological changes. The biopersistence of TCT and chrysotile was evaluated by TEM- EDS. Whereas chrysotile continuously have retained to 8 weeks instilled into rat lungs, talc of TCT showed statistically significant decrease of diameter from 1 weeks and statistically significant change in Si atomic % compositions at 8 weeks instilled into rat lungs. Physicochemical properties of tremolite of TCT were not affected until 8 weeks instilled into rat lungs. This study showed that the durability of TCT in the lungs is much weaker than chrysotile.

• Journal of Veterinary Clinics
• /
• v.27 no.2
• /
• pp.142-146
• /
• 2010

The purpose of this study is to establish experimental canine skin barrier disruption model in dog. The study was designed to investigate the predictive properties of acetone damage using as effect parameters transepidermal water loss (TEWL) and stratum corneum (SC) hydration. To compare the structures of SC intercellular lipids in normal and acetone damaged skin, TEM observations were performed. Six clinically normal, male Beagles without dermatological problems were chosen for this study. Acetone damage was performed at 48hrs after clipping. Efficacy measurements for TEWL and skin hydration were performed before ($t_1$) and after ($t_2$) damage in a temperature- and humidity-controlled room ($2{0\sim}22^{\circ}C$, 50-60%). TEWL and SC hydration values were decreased in the acetone damaged model compared with non damaged skin. In TEM observation of acetone damaged sample, the intercellular lipid lamellae exhibit abnormal and incomplete structure compared with those of normal skin. It seems that acetone damage would be one of canine skin epidermal barrier disruption model for the study of canine atopic dermatitis (AD) as well as dry skin in veterinary dermatology research.

• Korean Journal of Environmental Biology
• /
• v.37 no.3
• /
• pp.260-267
• /
• 2019

Two aerophytic cyanobacteria from the rockwall of Haje port located in Geum river, Korea, were isolated in unialgal cultures and submitted to polyphasic evaluation. The filaments of the populations presented solitary or several to many parallel arranged. The straight trichomes were not attenuated with rounded apical cell. Phylogenetic analyses based on 16S rDNA sequences indicated that these populations formed the same clade with Wilmottia murrayi and had 99% or greater DNA similarity. Through the ultrastructure of the TEM, these populations showed parietal thylakoid arrangement, which coincides with family Coleofasciculaceae. From the above results, we reported the newly recorded genus Wilmottia, and species W. murrayi in Korea.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.10
• /
• pp.1354-1367
• /
• 2014

In the present work, we describe a simple, cheap, and unexplored method for "green" synthesis of silver nanoparticles using cell extracts of the cyanobacterium Anabaena doliolum. An attempt was also made to test the antimicrobial and antitumor activities of the synthesized nanoparticles. Analytical techniques, namely UV-vis spectroscopy, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), and TEM-selected area electron diffraction, were used to elucidate the formation and characterization of silver-cyanobacterial nanoparticles (Ag-CNPs). Results showed that the original color of the cell extract changed from reddish blue to dark brown after addition of silver nitrate solution (1 mM) within 1 h, suggesting the synthesis of Ag-CNPs. That the formation Ag-CNPs indeed occurred was also evident from the spectroscopic analysis of the reaction mixture, wherein a prominent peak at 420 nm was noted. TEM images revealed well-dispersed, spherical Ag-CNPs with a particle size in the range of 10-50 nm. The X-ray diffraction spectrum suggested a crystalline nature of the Ag-CNPs. FTIR analysis indicated the utilization of a hydroxyl (-OH) group in the formation of Ag-CNPs. Ag-CNPs exhibited strong antibacterial activity against three multidrug-resistant bacteria. Additionally, Ag-CNPs strongly affected the survival of Dalton's lymphoma and human carcinoma colo205 cells at a very low concentration. The Ag-CNPs-induced loss of survival of both cell types may be due to the induction of reactive oxygen species generation and DNA fragmentation, resulting in apoptosis. Properties exhibited by the Ag-CNP suggest that it may be used as a potential antibacterial and antitumor agent.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.79-82
• /
• 2003

GaN nanoparticles were synthesized by the pulsed laser deposition (PLD) process on $SiO_2$substrate after irradiating the surface of the GaN sintered pellet by the ArF (193 nm) excimer laser. At this moment Ar gas pressure of 100 Pa, 50 Pa, 10 Pa and 1 Pa were applied during the ablation process and laser power of 100 mJ and 200 mJ were also applied. The synthesized fan nanoparticles were characterized by XRD, SEM, TEM, XPS and optical absorption spectra. The synthesized GaN nanoparticles had the crystallite sizes of 20~30 nm, and besides, GaN nanoparticles synthesized under low Ar gas pressure compared to the others corresponded with stoichiometry, and the optical band edge of the GaN nanoparticles was blueshifted.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.340-343
• /
• 2004

SrA1$_2$O$_4$was prepared by polymerized complex method and crystalline growth was investigated. Precursors was annealed at temperatures form 900 to 100$0^{\circ}C$, for different time(between 0 and 10 h), and that was determined by Transmittance Electron Microscopy (TEM) and X-Ray Diffractometer (XRD). Crystalline size was calculated by Scherrer's equation and its variation was studied. It increased rapidly in the primary stage and then slowly as a function of square root of time. so, It was grown to 32, 45 and 59nm after heating treatment at 900, 980, and 100$0^{\circ}C$ for 10 h respectively. Cstalline growth rates were 4.5, 9.6, and 18.6 nm/h$^{1}$2/ as a addition of heating temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.68-72
• /
• 2004

Sm-doped YBCO high $T_c$ superconductor was directionally grown by zone melt growth process in air atmosphere. Cylindrical green rods of $(Sm/Y)_{1.8}Ba_{2.4}Cu_{3.4}O_{7-x}$[(Sm/Y)1.8] oxides were fabricated by cold isostatic pressing (CIP) method using rubber mold. Based on the variation of melting temperature and growth rate, the microstructure and superconducting properties were systematically measured by using optical micrographs, TEM and SQUID magnetometer. In this study optimum melting temperature and growth rate were $1085^{\circ}C$ and 3.5 mm/hr respectively. Nonsuperconducting $(Sm/Y)_2BaCuO_5$ inclusions of (Sm/Y)1.8 superconductor were uniformly distributed within the superconducting (Sm/Y) $Ba_2Cu_3O^{7-x}$ matrix. The directionally melt-textured (Sm/Y)1.8 superconductor showed an onset $T_c$ $\geq$ 90K and sharp superconducting transition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.9
• /
• pp.862-876
• /
• 1991

In this theses, the procedure for finding the equivalent immittance of an n-line coupled structures is presented in terms of the normal mode parameters of the n-line coupled system. The above generalized equations can be applied to the various Coupled structures including directional couplers, DC blocks, bandpass/band elimination filters, and various other uniformly coupled filters. The design equations are based on a simplified TEM(Quasi TEM) mode. The obtained results and the definition of the scattering parameters for a general coupled line four port with arbitrary terminations are used to present the procedure to determine the optimum physical dimensions matching the given load impedances connected to input, output port. Multiple coupled rnicrostrip two-port with three lines circuit designed shows little discrepancy between the conventional method and this one. Four port with five lines were fabricated on teflon substrate($e$r=2.55) with its thickness h=l.588mm designed at the center frequency, 4 GHz. Their measured results are fairly close to the ones by computation.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.48-56
• /
• 1999

In this paper, we have investigated experimentally the effects of initial oxygen concentration on oxygen pileup phenomenon and the diffusion of implanted impurities. 1.2 MeV $^{11}B^{+}$ and 2.2 MeV $^{31}P^{+}$ ions were implanted into p-type (100) Si wafers with a dose of 1${\times}10^{15}$ / $\textrm{cm}^2$. Secondary ion mass spectrometry(SIMS) measurements were carried out to obtain depth distribution profiles for implanted impurities and oxygen atoms after two-step annealing of $700^{\circ}C$(20 hours)+$1000^{\circ}C$(10 hours). Residual secondary defect distribution and annealing behabiour were also studied by cross-sectional transmission electron microscopy(TEM) observations. Oxygen pileup nearly $R_p$(projected range) were observed by SIMS measurements and considerable amount of residual secondary defect layer were observed by TEM observations. It can be seen that oxygen atoms are trapped at the secondary defects by the experimental results. Enhanced diffusions of boron and phosphorus to the bulk direction were observed with the increasing of initial oxygen concentration.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.2
• /
• pp.47-52
• /
• 2001

AAO template having nano scale pores of high aspect ratio has been prepared through anodizing of aluminum foil in sulfuric acid electrolyte. The effect of anodizing parameters on the pore size and distribution was also examined to obtain the proper AAO as a template material of nanowire. The surface of AAO template prepared was observed by SEM to examine the mean size and distribution of pores generated by the anodizing and Fe nanowires obtained by AC electroforming using AAO template were also observed with TEM to determine the length and shape of them. From the results of work, it was found that the mean size or distribution of pores was influenced significantly by the anodizing parameters such as voltage and temperature of electrolyte. Mean length and aspect ratio of Fe nanowires prepared in the work were found to be $10{\mu}m\;and\;300\;to\;1,000$, respectively.