• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.886-896
• /
• 1997

To investigate an effect of phase separation on precipitation characteristics of CuCl nanocrystals in CuCl doped nonlinear optical glasses, borosilicate glass systems with 9 different compositions with ~2wt% of CuCl were selected and CuCl doped glasses were prepared by melting and precipitation method. Microstructural properties of the CuCl doped glasses were analyzed by optical absorption spectroscopy, acid elution test, TEM, and EDXS. While phase separation did not occur in Glass A~D, interconnected and droplet microstructures due to phase separation were found in Glass E, F and Glass G~I, respectively. In the particular composition of the matrix glasses in this study, the precipitation of the CuCl particles was observed in the phase separable glasses, not in phase non-separable glasses. The CuCl particles were precipitated in both silica-rich phase region and boronrich phase region of the glass matrix. In the case of 7.7Na2O-36.6B2O3-52.7SiO2(mole%) glass, the larger CuCl particles than those in the silica-rich phase region were observed in the boron-rich phase region.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1316-1322
• /
• 1998

The amount of VC and C/N ratio in Ti(CN) was varied to investigate the effect of VC addition on the mi-crostructural change in Ti(CN)-Ni system. As the amount of VC addition increases in Ti(C0.7N0.3)-20Ni sys-tem a complete solid solution was observed in Ti(C0.7N0.3)-20Ni-25VC system. It implies that the ratio of the dissolution rates of Ti(C0.7N0.3)to that of VC is nearly 2:1 at the sintering conditions used in this study. It was found from the experiments that the system composed of the Ti(C0.7N0.3) phase exhibits a rimless structure and relatively small amount of solid solution. That is among Ti(C0.7N0.3) phase exhibits a rimless structure and relatively small amount of solid solution. This is among Ti(C1-xNx) phases the dissolution rate of Ti(C0.3N0.7) is the lowest. Also fracture toughness(KIC) of the cermet was measured by indentation method. Attentions were paid to crack propagation path to look for a dominant fracture mode and to cor-relate it with fracture toughness values. The fracture toughness was relatively high with the addition of VC content. But the addition of a large VC content reduced the overall toughness of the cermet. This result is explained with the difference in fracture mode.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1383-1391
• /
• 1995

Hexagonal $\delta$-FeOOH was coated with Ba-Sol, which was produced by hydrolizing Ba(OC2H5)2, Ba-Sol coated $\delta$-FeOOH spread on a stainless plate, dried at 8$0^{\circ}C$ and then heat-treated. In this way, Ba-ferrite fine particles were produced. although there was a difference in a degree of hydrolysis of Ba(OC2H5)2, crystalline phase of Ba-ferrite appeared around 617$^{\circ}C$, and Ba-ferrite single phase was obtained after heat treatment at 80$0^{\circ}C$ for 2 hr. When Ba-ferrite was made from Ba-Sol coated $\delta$-FeOOH, $\delta$-FeOOH was thermally decomposed to $\alpha$-Fe2O3 at $700^{\circ}C$, producing a porous structure which was observed by TEM photographs. But the porous structure was not observed at 80$0^{\circ}C$. Ba-ferrite, heat-treated at 80$0^{\circ}C$ for 2 hr, had mean particle size of 1000$\AA$, lattice parameter of a0=5.889243 $\AA$ and c0=23.214502 $\AA$, a saturation magnetization ($\sigma$8) of 45.3 emu/g and a coercive force (Hc) of 5200Oe.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.391-394
• /
• 2013

In this study, nickel-zinc ferrite nanoparticles, with the chemical formula of $Ni_{0.3}Zn_{0.7-x}Cu_xFe_2O_4$ (where x = 0.1- 0.6 by step 0.1), were fabricated by the sol-gel method. The effect of copper substitution on the phase formation and crystal structure of the sample was investigated by X-ray diffraction (XRD), thermo-gravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD result shows that due to the reduction of Zn content,the crystallite size of the sample increased. The results of the vibration sample magnetometer (VSM) exhibit an increase in saturation magnetization value (Ms) for samples with x ${\leq}$ 0.3 and a linear decrease for samples with x > 0.3. The variation of saturation magnetization and coercivity of the samples were then studied.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.412-416
• /
• 2013

FePt:Ag (100 nm) nanocomposite thin films were prepared on naturally-oxidized Si substrates by dc magnetron sputtering at room temperature. X-ray diffraction (XRD) and transmission electron microscopy (TEM) are used to investigate the effects of annealing pressures on the ordering processes and microstructures of these films. The average sizes for the $L1_0$ ordered domains and the FePt grains are reduced to d = 9 nm and D = 13 nm from d = 19 nm and D = 34 nm, respectively, when the annealing pressure is enhanced to 0.6 GPa from room pressure at 873 K. Furthermore, the size distribution is improved into a narrow range. With increasing pressure, the coercivity of $L1_0$-FePt:Ag thin films decreases from 15.1 to 7.6 kOe. In the present study, the effects of high pressure on the $L1_0$ ordering processes and microstructures of FePt:Ag nanocomposite films were discussed.

• The Korean Journal of Malacology
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2004

An anatomical and ultrastructural study on the dart sac and the dart of a Korean snail Nesiohelix samarangae was conducted to understand their morphological characteristics with the help of the light microscope and electron microscopes, TEM and SEM. Nesiolelix samarangae had two darts which are pure white structures 6-8 mm in length, tapering from 0.6-0.8 mm to 0.15-0.3 mm. The dart sac had a long conic lumen subdivided into two by a septal wall, and the darts were centrally embedded in the thick muscular layers of the sac. The darts occupied each of the two luminal spaces one per each. The convexed surfaces of the darts had many crystal buds in the shape of the petals. Otherwise, the convexed surfaces of the darts had numerous crystal buds in the shape of candle or topaz. The luminal surface of the dart sac was covered with a single columnar epithelium. The epithelial cells possessed microvilli on their free surface.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.298-301
• /
• 2008

A preparation of $Ni_xMn_{1-x}Fe_2O_4$ nanoparticles produced via the reduction of Nickel nitrate hexahydrate, Manganese (II) nitrate hexahydrate and Iron nitrate nonahydrate with hydrazine in Igepal CO-520/cyclohexane reverse micelle solutions was investigated. Transmission Electron Microscope (TEM), X-ray Diffraction (XRD) and Vibration Sample Magnetometer (VSM) analyses showed that the resultant nanoparticles increased the molar ration of water to Igepal CO-520 as the concentrations of Nickel nitrate hexahyrate, Manganese (II) nitrate hexahydrate and Iron nitrate nonahydrate increased. The average size of the synthesized particles calcined at $600^{\circ}C$ for 2hrs was in the range of 20 nm to 30 nm, and the particle distribution was broadened. The phase of the synthesized particles was crystalline, and the magnetic behavior of the synthesized particles was superparamagnetism. The effect of the synthesis parameters of the molar ratio of water to surfactant and the calcination temperature was discussed.

• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.57-60
• /
• 2020

Titanium aluminides have attracted special interest as light-weight/high-temperature materials for structural applications. The major problem limiting practical use of these compounds is their poor ductility and formability. The powder metallurgy processing route has been an attractive alternative for such materials. A mixture of Ti and Al elemental powders was fabricated to a mechanical alloying process. The processed powder was hot pressed in a vacuum, and a fully densified compact with ultra-fine grain structure consisting of Ti₃Al intermetallic compound was obtained. During the compressive deformation of the compact at 1173 K, typical dynamic recrystallization (DR), which introduces a certain extent of grain refinement, was observed. The compact had high density and consisted of an ultra-fine equiaxial grain structure. Average grain diameter was 1.5 ㎛. Typical TEM micrographs depicting the internal structure of the specimen deformed to 0.09 true strain are provided, in which it can be seen that many small recrystallized grains having no apparent dislocation structure are generated at grain boundaries where well-developed dislocations with high density are observed in the neighboring grains. The compact showed a large m-value such as 0.44 at 1173 K. Moreover, the grain structure remained equiaxed during deformation at this temperature. Therefore, the compressive deformation of the compact was presumed to progress by superplastic flow, primarily controlled by DR.

• Journal of Species Research
• /
• v.9 no.3
• /
• pp.210-217
• /
• 2020

Microseira wollei (Farlow ex Gomont) G.B.McGregor and Sendall ex Kennis, a mat-forming filamentous harmful cyanobacterium, has historically been found in the United States. Microseira wollei produces neurotoxins and hepatotoxins which affect declining water quality. In the present research, we report of unrecorded M. wollei with morphology, TEM anatomy, molecular phylogeny on the Korean population. Based on 16S rRNA gene sequences, Korean population were different by 0.02% (2 bp) to the Japanese population, 1.2-1.3% to the Australian population, and 2.5-3.7% to the United States populations. nifH gene sequences were 8.4-8.7% different to Australian ones and 3.5-3.8% to other population, however molecular phylogenetic analysis of M. wollei living in Korea revealed monophyly with the geographical populations of U.S.A., Australia, and other geographical populations. Since the mat of M. wollei has been reported to be maintained for several years in other countries, it is necessary further investigate the seasonal and regional distribution of this species in Korea.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.124-131
• /
• 2000

Antibacterial activities of powdered spices(garlic , ginger, cinnamon and clove) against pathogenic Escherichia coli )157:H7 and Staphyloccus auresus were investigated. Spice powder was added in was exponetial phase of each bacterial culture . Growth inhibition was determined by the absorbance at 660nm and morphological changes of the cells were observed by transmission electron microscope (TEM). Ginger powder has the highest antibacterial activity, following cinnamon , clove and garlic has the least activity.Growth of Escherichia coli O157:H7 and Staphyloccus aureus were completely inhibited within 5 hours after addition of 1 % of garlic , 0.3% of ginger or cinnamon , 0.5% of clove powder on the exponential phase of the cells. Spice untreated cells of E. coli and S. aureus, the cytoplasm was entirely surrounded by rigid cell wall and cell walls formed a smooth layer well attached to the plasma membrane. In the cells of E. coli and S. aureus treated with spice powder, cell wall and plasma membrane were lysed and severely damaged. E.coli cells growth in the presence of spice powder showed plammolysis, the loss of electron dense material, the formation of extra cellular blebs and cytoplasm burst out from the cell. S .sureus cells grown in the presence of spice powder showed swell of cell wall, the loss of electron dense material , coagulation of cell cytoplasm and formation of extra cellular blebs. Severely damaged cells of S. aureus lost whole cytoplasm and left as ghost of the cell. Spice powder stimulated autolyssi and induced cell death.