• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.761-766
• /
• 2006

Polymer composite are increasingly considered as structural components for use in civil engineering, on account of their enhanced strength-to-weight ratios. Unsaturated polyester (UP) resin have been widely used for the matrix of composites such as FRP and polymer composite, due to its excellent adhesive. Polymer nanocomposites are new class of composites derived from the nano scale inorganic particles with dimensions typically in the range of 1 to 1000 nm that are dispersed in the polymer matrix homogeneously. Owing to the high aspect ratio of the fillers, mechanical, thermal, flame, retardant and barrier properties are enhanced without significant loss of clarity, toughness or impact strength. To prepare the MMT (Montmorillonite)-UP exfoliated nanocomposites, UP was mixed with MMT at $60^{\circ}C$ for 3 hours by using pan mixer. XRD (X-ray diffraction) pattern of the composites and TEM (Transmission Electron Micrographs) showed that the interlayer spacing of the modified MMT were exfoliated in polymer matrix. The mechanical properties also supported these findings, since in general, tensile strength, modulus with modified MMT were higher than those of the composites with unmodified MMT. The thermal stability of MMT-UP nanocomposite is better than that of pure UP, and its glass transition temperature is higher than that of pure UP. The polymer concrete made with MMT-UP nanocomposite has better mechanical properties than of pure UP. Therefore, it is suggested that strength and elastic modulus of polymer concrete was found to be positively tensile strength and tensile modulus of the MMT-UP nanocomposites.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.6
• /
• pp.916-923
• /
• 2022

Water samples were collected from three spots(Namcheon, Changwoncheon and Cheongwoonji) in Changwon and genomic DNA was isolated from them. Quantitative PCR was performed with the isolated DNA as template and primers targeting five different class A extended-spectrum beta-lactamase(ESBL) genes(bla_OXA-1, bla_SHV, bla_TEM, bla_CTX-M-1, bla_CTX-M-9). The number of total ESBL genes from each sample showed large variations between each sample. Thirty nanograms of DNA from Namcheon contained 1.93×10⁶ copies of ESBL genes whereas the same amount of DNA from Changwoncheon contained 1.47×10⁵ copies of ESBL genes. However, the same amount of DNA from Cheongwoonji pond contained only 9.5×10³ copies of ESBL genes. The ratio of each ESBL genes showed little difference between Namcheon river and Changwoncheon river, but DNA from Cheongwoonji pond showed a large difference from the rest. bla_OXA-1 gene was present at 65.3%, and bla_CTX-M-1 gene 33.6% for Namcheon comprising together almost 99%. bla_OXA-1 gene was present at 64.1%, and bla_CTX-M-1 gene 19.1% for Changwoncheon comprising together over 83%. bla_CTX-M-1 gene was present at 87.5% and bla_CTX-M-9 genes 9.8% for Cheongwoonji, a pond which is a closed and isolated environment.

• Journal of the Korean Chemical Society
• /
• v.67 no.6
• /
• pp.420-428
• /
• 2023

Crosslinking was introduced into vinylized-mesoporous silica and recycled polyethylene. By introducing a vinyl group into the mesoporous silica, it becomes a material capable of inducing cross-linking with non-polar polyethylene. By synthesizing vinylized-mesoporous silica and inducing crosslinking with recycled polyethylene, a recycled polyethylene composite with improved physical properties than existing recycled polyethylene was synthesized. In addition, even when a small amount is added according to the grade of recycled polyethylene using vinylized-mesoporous silica, the crosslinking reaction proceeds and all physical properties are improved. Four types of vinylized-mesoporous silica were synthesized, and the shape, microstructure, and functional groups were analyzed by TEM, BET, FT-IR, and XRD. Using vinylized-mesoporous silica, three types of compounds were blended by crosslinking reaction with recycled polyethylene. In order to confirm the presence or absence of crosslinking, analysis was performed using XPS and FT-IR, and physical properties such as tensile strength, elongation, flexural strength, and flexural modulus were confirmed using a universal testing machine. As a result, by applying vinylized-mesoporous silica to recycled polyethylene in various grades, the weak physical properties of existing recycled polyethylene were overcome. By applying the vinylized-mesoporous silica, recycled polyethylene composite material that overcomes the weak physical properties to the normal polyethylene, it shows the optimal physical property index that can be used commercially. Therefore, it is expected that it can potentially increase the use of recycled polyethylene and recycle resources.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.50 no.1
• /
• pp.13-26
• /
• 2024

Objectives: The aim of this study was to perform a comparative analysis of the ultrastructural and chemical composition of sialoliths, tonsilloliths, and antroliths and to describe their growth pattern. Materials and Methods: We obtained 19 specimens from 18 patients and classified the specimens into three groups: sialolith (A), tonsillolith (B), and antrolith (C). The peripheral, middle, and core regions of the specimens were examined in detail by histology, micro-computed tomography (micro-CT), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy, and transmission electron microscopy (TEM). Results: In the micro-CT, group A showed alternating radiodense and radiolucent layers, while group B had a homogeneous structure. Group C specimens revealed a compact homogeneous structure. Histopathologically, group A showed a laminated, teardrop-shaped, globular structure. Group B demonstrated degrees of immature calcification of organic and inorganic materials. In group C, the lesion was not encapsulated and showed a homogeneous lamellar bone structure. SEM revealed that group A showed distinct three layers: a peripheral multilayer zone, intermediate compact zone, and the central nidus area; groups B and C did not show these layers. The main elemental components of sialoliths were O, C, Ca, N, Cu, P, Zn, Si, Zr, F, Na, and Mg. In group B, a small amount of Fe was found in the peripheral region. Group C had a shorter component list: Ca, C, O, P, F, N, Si, Na, and Mg. TEM analysis of group A showed globular structures undergoing intra-vesicular calcification. In group B, bacteria were present in the middle layer. In the outer layer of the group C antrolith, an osteoblastic rimming was observed. Conclusion: Sialoliths had distinct three layers: a peripheral multilayer zone, an intermediate compact zone and the central nidus area, while the tonsillolith and antrolith specimens lacked distinct layers and a core.

• Journal of Adhesion and Interface
• /
• v.25 no.3
• /
• pp.82-87
• /
• 2024

There is a growing interest in eco-friendly materials to achieve carbon neutrality, and many studies have been published on the use of functional nanoparticles in natural fibers as smart composites. This study is about the optimization of manufacturing parameters for carbon nanotube (CNT) growth by chemical vapor deposition (CVD) on the surface of basalt fiber. Co-Cu-based metal catalysts were prepared by co-precipitation method for CNT growth on the surface of basalt fiber. The catalyst was fixed to basalt fibers through a spray process. The effect of heat treatment temperature conditions and fiber surface conditions on the growth of CNT was evaluated. The growth of CNT was investigated using transmission electron microscopy (TEM) and scanning electron microscopy (SEM) to observe changes in their shape and diameter. The tensile strength of the composites using CNT/basalt fiber fabrics and amine-based epoxy as the base material prepared at different heat treatment temperatures was compared and evaluated according to ASTM D3039. We have observed that stable CNT are manufactured at temperatures above 600℃, while carbon nanofibers (CNF) are fabricated at temperatures above 400℃. The sizing material present on the surface of the basalt fiber was a hindrance to CNT growth.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.5
• /
• pp.187-193
• /
• 2024

Lanthanide-doped upconversion nanoparticles (UCNPs) are capable of converting low energy near-infrared photons into relatively high energy visible and ultraviolet photon. Their unique optical properties have a broad range of applications such as volumetric display, security labelling and deep-tissue imaging. Herein, the optically active hexagonal phased NaYF₄:Nd³⁺, Yb³⁺@NaYF₄:Yb³⁺, Tm³⁺ core-shell nanoparticles were synthesized via facile co-precipitation method which can show upconversion luminescence upon 745 nm laser excitation. This is accomplished by taking advantages of the large absorption cross-section of Nd³⁺ ions between 720 to 760 nm plus efficient spatial energy transfer and migration which starts from Nd³⁺ ions to Yb³⁺ ions and Tm³⁺ ions. Also, the formation of inert NaYF₄ shell significantly enhance the upconversion efficiency. The core-shell-shell UCNPs were characterized with X-ray diffraction (XRD) patterns, scanning electron microscope (SEM), transmission electron microscope (TEM), absorbance, and photoluminescence spectra.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.2
• /
• pp.170-178
• /
• 2011

The purpose of this study was to assess the prevalence of periodontopathic bacteria and resistance determinants from oral biofilm of children. Subgingival dental plaque was isolated from 87 healthy children, and PCR was performed to determine the presence of 5 periodontal pathogens including P. gingivalis, T. forsythia, T. denticola, F. nucleatum, A. actinomycetemcomitans, and nine resistance genes including tet(Q), tet(M), ermF, aacA-aphD, cfxA, $bla_{SHV}$, $bla_{TEM}$, vanA, mecA. 1. The prevalence of F. nucleatum, T. forsythia. and P. gingivalis was 95.4%, 55.2%, and 40.2%, respectively. In addition. the prevalence of A. actinomycetemc omitans was 5.7%, while T. denticola was 3.4%. 2. In analysis of antibiotic resistance determinants. cfxA, $bla_{TEM}$ and tet(M) were detected in all the samples tested. It was also found that the prevalence of tet(Q) showing tetracycline resistance. $bla_{SHV}$ associated with resistance to ${\beta}$-lactams, ermF exhibiting erythromycin resistance, and, vanA resulting vancomycin resistance was 88.5%, 29.9% 87.4%, and 48.5%, respectively. The aacA-aphD gene showing resistance to aminoglycosides and mecA gene harboring methicillin resistance exhibited the lowest prevalence with 9.2%. 3. In a correlation analysis between periodontopathic pathogens and antibiotic resistance determinants, it was found that there was a significant correlation between T. forsythia and $bla_{SHV}$. Also, P. gingivalis and vanA showed a correlation. Finally, tet(Q) and ermF showed a significant correlation (phi: 0.514) while mecA and vanA also showed a correlation(phi: 0.25).

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.42-54
• /
• 1995

$Ta_2O_5$ thin film IS a promising material for the high dielectrics of ULSI DRAM. In this study, $Ta_2O_5$ thin film was grown on p-type( 100) Si wafer by thermal metal organic chemical vapo deposition ( MCCVD) method and the effect of operating varialbles including substrate temperature( $T_s$), bubbler temperature( $T_ \sigma$), reactor pressure( P ) was investigated in detail. $Ta_2O_5$ thin film were analyzed by SEM, XRD, XPS, FT-IR, AES, TEM and AFM. In addition, the effect of various anneal methods was examined and compared. Anneal methods were furnace annealing( FA) and rapid thermal annealing( RTA) in $N_{2}$ or $O_{2}$ ambients. Growth rate was evidently classified into two different regimes. : (1) surface reaction rate-limited reglme in the range of $T_s$=300 ~ $400 ^{\circ}C$ and (2: mass transport-limited regime in the range of $T_s$=400 ~ $450^{\circ}C$.It was found that the effective activation energies were 18.46kcal/mol and 1.9kcal/mol, respectively. As the bubbler temperature increases, the growth rate became maximum at $T_ \sigma$=$140^{\circ}C$. With increasing pressure, the growth rate became maximum at P=3torr but the refractive index which is close to the bulk value of 2.1 was obtained in the range of 0.1 ~ 1 torr. Good step coverage of 85. 71% was obtained at $T_s$=$400 ^{\circ}C$ and sticking coefficient was 0.06 by comparison with Monte Carlo simulation result. From the results of AES, FT-IR and E M , the degree of SiO, formation at the interface between Si and TazO, was larger in the order of FA-$O_{2}$ > RTA-$O_{2}$, FA-$N_{2}$ > RTA-$N_{2}$. However, the $N_{2}$ ambient annealing resulted in more severe Weficiency in the $Ta_2O_5$ thin film than the TEX>$O_{2}$ ambient.

• Journal of Veterinary Clinics
• /
• v.25 no.5
• /
• pp.330-339
• /
• 2008

Ceramide, cholesterol and free fatty acids are the major intercellular lipids, maintaining the integrity of the skin barrier. However, the roles of these lipids in canine skin barrier function are little known. The aim of this study was to evaluate the repairing effects of 2% ceramide (CER), 2% cholesterol (CHO), 2% linoleic acid (LIN) and 2% intercellular lipid mixture (ILM) on damaged canine skin barrier by 1.25% sodium lauryl sulphate (SLS). Transepidermal water loss (TEWL), skin hydration, skin pH and skin thickness were assessed. Histological profiles and transmission electron microscopic (TEM) profiles were assessed on day 12. SLS effectively induced the canine skin barrier damage. TEWL was significantly decreased by topical application of CER and ILM in SLS and vehicle-treated skin on day 8 and 12, respectively (p < 0.05, p < 0.0 I). By end of the experiment all lipids significantly decreased the TEWL as compared with SLS and vehicle control, but CER and ILM more significantly decreased the TEWL than UN and CHO, respectively (p < 0.01). Skin hydration was significantly increased by CER and ILM during experimental periods (p < 0.01). Skin pH was significantly decreased by CER, LIN and ILM. In histological profiles, the thickness of the stratum corneum (SC) was significantly increased by the SC lipids as compared with vehicle and SLS (p < 0.01). Especially, CER and ILM showed more prominent improvement of barrier recovery. In TEM of the SC, SLS induced exfoliations of corneodesmosomes in the SC, and CER and ILM effectively protected exfoliations of corneodesmosomes on SLS-damaged canine skin. These results indicated that topical application of CER and ILM dramatically improved damaged-skin barrier function by SLS. Also, it was considered that the use of CER or ILM was recommended for the management of skin barrier dysfunction by irritant and inflammatory skin disorders such as atopic dermatitis.

• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.109-114
• /
• 2008

The samples were synthesized by using a solid state reaction. The X-ray diffraction pattern for $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ showed a pure rutile phase with tetragonal structure, Mixtures of the proper proportions of the elements sealed in evacuated quartz ampoule were heated at $870{\sim}930^{\circ}C$ for one day and then slowly cooled down to room temperature at a rate of $10^{\circ}C$/h. In order to obtain single phase material, it was necessary to grind the sample after the first firing and to press the powders into pellets before annealing them for a second time in evacuated and sealed quartz ampoule. Magnetic properties have been investigated using the vibrating sample magnetometer (VSM). Room temperature magnetic hysteresis (M-H) curve showed an obvious ferromagnetic behavior and the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $1.5\;{\mu}_B$/CoFe. But the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $0.02\;{\mu}_B$/CoFe without Ti-getter. Size of particles is about $1\;{\mu}m$ using the transmission electron microscope (TEM). The ingredients of sample are distributed irregular in particles. Only Fe get shown on the surface of particles.