• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.697-702
• /
• 1998

방사선에 의해 유발되는 난소내 난포의 폐쇄가 apoptosis를 매개로 하여 일어나는지 조사하고자 면역조직화학적 방법을 이용하여 실험을 수행하였다. 미성숙 생쥐 (3주, ICR)에 감마선을 조사하였으며, 조직절편을 제작한 후 TUNEL 방법에 의한 in situ 3'end labelling 면역조직화학 염색을 실시하였다. 전반적인 난소의 상태를 파악하고자, 일반적인 hematoxylin-eosin(HE) 염색을 실시하여 대조하였다. 면역조직화학 염색은 apoptosis가 일어난 난포를 시각적으로 구분해낼 수 있는 효과적인 방법임이 실험적으로 확인되었다. ApopTeg/HE 비율을 볼 때, R군은 6h에서 12h 에 높은 값을 보였고, 8d군에서 다시 증가하는 양상을 보였으며 이같은 결과는 실험동물의 난소내 과립세포의 apoptosis가 방사선 조사후 6시간부터 일어나기 시작하여 점차 증가된다는 사실을 나타낸 것이다. 결론적으로 방사선에 의한 난포의 폐쇄는 과립세포의 apoptosis를 매개로 하여 일어남을 알았다.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1201-1210
• /
• 2018

The applications of thermoelectric generators (TEGs) have received a lot of attention both in terms of harvesting waste thermal energy and the need for multi-levels of power. It is critical to track the optimum electrical operating point using DC to DC converters controlled by a pulse that is generated through a maximum power point tracking algorithm (MPPT). In this paper, the hardware implementation of a short-current pulse algorithm has been demonstrated under steady stated and transient conditions. In addition, the MPPT algorithm has been proposed, which is one of the most effective and applicable algorithms for obtaining the maximum power point of TEGs. During this study, the proposed prototype has been validated both analytically and experimentally. It has also demonstrated successful performance, which highlights the claimed advantages of the proposed MPPT solution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1455-1458
• /
• 2007

In this research, a polycrystalline silicon (poly-Si) film layer for micro thermoelectric generator (TEG) was fabricated. The fabrication process of the thermoelectric poly-Si film layer is explained. The P-type and N-type poly-Si films were fabricated on a tetra ethoxy silane (TEOS) layer with a supporting Si wafer. Seebeck coefficient and electrical conductivity were measured, including the transport properties such as the hall coefficient, hall mobility and carrier concentration. The design parameters for a rapid thermal process (RTP) were decided based on the experimental results. The measured power factors of the P-type and N-type were $21.2\;{\mu}Wm^{-1}K^{-2}$ and $26.7\;{\mu}Wm^{-1}K^{-2}$, respectively.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1845-1849
• /
• 2010

We have proposed and fabricated a Buck-Boost DC to DC Converter for Thermoelectric generator (TEG) with constant output voltage suitable for battery chargers or constant voltage supplies in the range of several watt. The experimental and simulation results have shown that the proposed method allows stable operation with maximum 86% power transfer efficiency. The proposed circuit has a merit in cost and miniaturization of a system compared to conventional MPPT algorithms, because the proposed method adopts only analog circuit without DSP or micro controller unit for calculating peak power point by iterative methods.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.594-603
• /
• 2004

Several desiccant cooling systems have been developed in terms of cost and performance. In this study a fin-tube exchanger has been used for liquid desiccant dehumidification system. This dehumidifier has been designed to study the absorption characteristic of the aqueous triethylene glycol(TEG) solution which has the flow range from 20 to 50 LPM. The dehumidifier performance characteristics of working factor variables such as inlet solution flow rate, air flow rate, solution concentration and brine temperature have been analyzed. This dehumidifier has the ability to provide running while saving the latent heat load of total energy. The result of this experiment can provide useful data for hybrid air conditioning system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.25-30
• /
• 2003

Several desiccant cooling systems have been developed in terms of cost and performance. In this study a fin-tube exchanger has been used for liquid desiccant dehumidification system. This dehumidifier has been designed to study the absorption characteristic of the aqueous triethylene glycol(TEG) solution which has the flow range from 20 to 50 LPM. The dehumidifier performance characteristic of working factor variables such as inlet solution flow rate, air flow rate, solution concentration, solution temperature, brine temperature, air temperature and inlet air relative humidity has been analyzed. The result of this experiment can provide useful data for hybrid air conditioning system.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1756-1765
• /
• 2001

The heat and mass transfer process between the falling liquid desiccant(TEG) film and the air in counter flow at the dehumidifier of desiccant cooling system were investigated. The governing equations with appropriate boundary and interfacial conditions describing the physical problems were solved by numerical analysis. As a result, the effects of the design parameters and the outside air conditions on the rates of dehumidification and sensible cooling were discussed. The results of the dehumidification and sensible cooling rates were compared with those of the cross flow at the same conditions.

• 설비공학논문집
• /
• 제7권3호
• /
• pp.512-520
• /
• 1995

This study investigates the simultanceous heat and mass transfer between a falling desiccant film and air in cross flow at the interface. The application of this work is the optimization of falling film evaporators for use in potential hybrid air conditioning systems. The specific geometry considered is liquid TEG films falling along the vertical cooled surfaces of a channel with air in cross flow. The equations to describe the coupled heat and mass transfer between a falling desiccant film and air in cross flow for a falling film evaporator have been presented and solved numerically. The effects of important design and operating variables on the evaporator performance predicted by the parametric numerical analysis and suggestions for performance improvements of the evaporator are presented.

• 호남수학학술지
• /
• 제43권2호
• /
• pp.239-258
• /
• 2021

In the present paper, we introduce the study of slant lightlike submanifolds of indefinite nearly Kaehler manifolds. After proving some geometric results for the existence of slant lightlike submanifolds of indefinite nearly Kaehler manifolds, we give a non-trivial example of this class of lightlike submanifolds. Then, we derive some conditions for the integrability of the distributions associated with slant lightlike submanifolds of indefinite nearly Kaehler manifolds. Consequently, we study totally umbilical slant lightlike submanifolds of indefinite nearly Kaehler manifolds. Subsequently, we investigate minimal slant lightlike submanifolds of indefinite nearly Kaehler manifolds.

• 호남수학학술지
• /
• 제45권4호
• /
• pp.629-647
• /
• 2023

We introduce the study of a new class of a lightlike submersion d. Then, we derive a relationship between the holomorphic section 𝜙 : K₁ → K' from a screen generic lightlike submanifold of an indefinite Kaehler manifold K₂ onto an indefinite almost Hermitian manifold K', and show that for this case K' must be an indefinite Kaehler manifold. Then, we derive a relationship between the holomorphic sectional curvatures of K₂ and K'. Finally, we present a classification theorem for a screen generic lightlike submersion, giving the relationship between the sectional curvatures of the total space K₂ and the fibers.