• English Language & Literature Teaching
• /
• v.17 no.3
• /
• pp.99-118
• /
• 2011

Research on strategic Code-Switching (CS) of second language learners in teaching English in English (TEE) program provides an elaborate framework for analyzing how learners manage to express themselves in spite of their limited knowledge of the target language. This research presupposes that L2 learners' CS presents innovative solutions for communicative strategy, and that CS used as communicative strategy can promote L2 learners' language acquisition. The major questions of current research involve examining the significant patterns of different functions of CS in L2 learners' interaction and investigating L2 learners' CS styles according to the different functions of CS. The implication of CS utility is regarded as a teaching technique in the TEE program. Recorded transcript is analyzed to trace the same pattern and the categorization of CS as well as to recognize the functions of CS and their ratio. Hence, this leads to the conclusion that learners' negotiation between code selection and communication intention occurs in patterns. The learners' CS tends to be predictable, reproductive, and systematic, as one of the language acquisition phases. Therefore, the attention to the CS in the TEE program should be redirected in communication substantiality toward the principles of pragmatics. As an additional advantage of the CS analysis, this research elaborates on a conceptual acceptance of CS as a set of learners' strategies in the TEE program.

• Journal of Nutrition and Health
• /
• v.56 no.4
• /
• pp.391-403
• /
• 2023

Purpose: This study evaluated the validity of a physical activity classification table (PACT) based on total energy expenditure (TEE) and physical activity level (PAL) measured using the doubly labeled water (DLW) method in Korean adults and the elderly. Methods: A total of 141 (male 70, female 71) adults and elderly were included. The reference standards TEE_DLW, PAL_DLW were measured over a 14-day period using DLW. A 24-hour physical activity diary was kept for three days (two days during the week and one day on the weekend). PAL_PACT was calculated by classifying the activity type and intensity using the PACT. PAL_PACT was multiplied by resting energy expenditure measured by indirect calorimetry to estimate TEE_PACT. Results: The mean age of the study participants was 50.5 ± 18.8 years, and the mean body mass index was 23.4 ± 3.3 kg/m². A comparison of TEE_DLW and TEE_PACT by sex and age showed no significant differences. The bias, the difference between TEE_DLW and TEE_PACT, was male 17.3 kcal/day and female -4.5 kcal/day. The percentage of accurate predictions (values within ± 10% of the TEE_DLW) of TEE_PACT was 58.6% in males and 54.9% in females, with the highest prediction values in the age group 40-64 years (70.9%) in males and over 65 years (73.9%) in females. The spearman correlation coefficient (r) between TEE_PACT and TEE_DLW was 0.769, indicating a significant positive correlation (p < 0.001). Conclusion: In this study, the use of a new PACT for calculating TEE and PAL was evaluated as valid. A web version of the software program and a smartphone application need to be developed using PACT to make it easier to apply for research purposes.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.36-39
• /
• 2009

We developed an optimal design interface based on VBA(Visual Basic Application) that takes advantage of API(Application Program Interface) function of commonly used EM analysis software. The developed interface is adopted for an optimal design of a septum in a waveguide tee junction using PSO(Particle Swarm Optimization) algorithm. The objective function of the optimal design is defined by $S_{11}$-parameter of the waveguide tee junction Design variables are established as position of the septum, that are changed to satisfy the design goal Using the developed design interface and PSO algorithm, the objective function converged to the smallest value, showing the validity of the proposed method. The design interface was developed using Microsoft Excel software, enabling easy control of design parameters for user. Also, various analysis parameters can be set in the Excel interface, including waveguide input mode and frequency. After completion of the design, field solutions at user-specified positrons can be extracted to the output files in complex number form.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.279-280
• /
• 2017

최근 ARM, Intel 등의 주요 CPU 제조사에서는 운영체제 등 상위 레벨 소프트웨어에 대한 공격으로부터 어플리케이션의 보안상 민감한 부분을 보호하려는 목적으로 신뢰실행환경(Trusted Execution Environment, TEE)이라는 격리된 실행 환경을 자사의 칩에 제공하고 있다. TEE를 활용하기 위해서는 일반 실행 환경에서 수행될 코드와 TEE에서 수행될 코드를 각각 작성하여야 한다. 본 논문에서는 TEE 프로그램 개발의 편의를 위해, 기존에 작성된 C 프로그램을 분석하여 보안상 민감한 정보를 처리하는 부분을 분석하는 도구를 제시한다. 개발자가 기존 C 프로그램에서 보안상 민감한 정보가 유입되는 부분을 표시하면 본 도구는 민감한 정보가 처리되는 함수 목록을 분석하고, 개발자는 이를 바탕으로 일반 실행 환경과 TEE에서 수행될 코드를 작성할 수 있다.

• Journal of Drive and Control
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2014

In this study, the authors carried out experiments and numerical simulations in order to clarify the pressure pulsation characteristics in multiple-delivery rotating-cam and stationary-cylinder type radial piston pumps. Also, a tee filter was applied to the pump in order to mitigate the pressure pulsation. Through the experiments and simulations, it was known that pressure pulsation with a magnitude higher than 40% of the mean load pressure could occur in the pump used in the experiments. Moreover, it was confirmed that a tee filter designed in this study could effectively mitigate the pressure pulsation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.185-191
• /
• 2002

A window-based multibody dynamics program CADyna(Computer Aided Dynamics) is developed and applied for kinematic and dynamic analysis ova steering system. The program is composed oft pre-processor, a main processor, and a post-processor. The pre-processor is developed with Visual C7+ and the post-processor is developed with OpenGL and TeeChart. The main processor generates the equations of motion employing velocity transformation technique. The developed program is customized for the design of an intermediate shaft in a steering system.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.2
• /
• pp.29-40
• /
• 2022

PURPOSE: This study examined the effects of an exercise program for the thoracic spine and scapula rather than the neck, which is the primary site of pain. METHODS: Thirty-two elementary school teachers with a forward head posture (FHP) were assigned randomly to either the experimental group (n = 16) or the control group (n = 16). The experimental group performed scapular stabilization exercise (SSE) and thoracic extension exercise (TEE), and the control group performed cervical self-myofascial release exercise and stretching exercise. The pulmonary functions, pain, craniovertebral angle (CVA), and cervical range of motion (CROM) were measured before the intervention and six weeks after. RESULTS: The within-group comparisons showed that the VAS and CROM (except for extension) in both groups were significantly different before and after the intervention (p < .05). The changes in the maximum inspiratory pressure (MIP), maximum expiratory pressure (MEP), forced vital capacity (FVC), forced expiratory volume at 1 sec (FEV1), and CVA were significant only in the experimental group (p < .05). The between-group comparisons showed a significant difference in the FVC, FEV1, VAS, CVA, and left lateral flexion (p < .05). CONCLUSION: The combination of SSE and TEE in the experimental group was more effective in improving the FHP and breathing ability. Moreover, the experimental group and control combination appeared to be effective in reducing pain and improving the CROM. The combination of SSE and TEE, which are exercises that do not target the cervical spine directly, was effective in improving the posture, respiration, neck pain, and CROM in elementary school teachers with FHP.

• Nuclear Engineering and Technology
• /
• v.31 no.3
• /
• pp.267-275
• /
• 1999

This paper deals with the industrial problem of thermal striping damage on the French prototype fast breeder reactor, Phenix and it was studied in coordination with the research program of IAEA. The thermomechanical and fracture mechanics evaluation procedure of thermal striping damage on the tee-junction of the secondary piping using Green's function method and standard FEM is presented. The thermohydraulic(T/H) loading condition used in the present analysis is the random type thermal loads computed by T/H analysis on the turbulent mixing of the two flows with different temperatures. The thermomechanical fatigue damage was evaluated according to ASME code section 111 subsection NH. The results of the fatigue analysis showed that fatigue failure would occur at the welded joint within 90,000 hours of operation. The assessment for the fracture behavior of the welded joint showed that the crack would be initiated at an early stage in the operation. It took 42,698.9 hours for the crack to propagate up to 5 mm along the thickness direction. After then, however, the instability analysis, using tearing modulus, showed that the crack would be arrested, which was in agreement with the actual observation of the crack. An efficient analysis procedure using Green's function approach for the crack propagation problem under random type load was proposed in this study. The analysis results showed good agreement with those of the practical observations.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.36-39
• /
• 2001

Tubular hydroforming has attracted increased attention in the automotive industry recently. In this study, a professional finite element program for analysis and design of tube hydroforming processes has been developed, called HydroFORM-3D, which is based on a rigid-plastic model. With the developed program several hydroforming processes such as a tee extrusion, an automotive rear axle housing and lower arm are analyzed and designed. And also, the Oyane's ductile fracture integral I was calculated from the histories of stress and strain according to every element and then the forming limit of the hydroforming process could be evaluated. The pediction of the bursting failure and the plastic deformation during typical hydroforming processes shows to be reasonable so that this approach can be extended to other various tube hydroforming processes.

• English Language & Literature Teaching
• /
• v.16 no.3
• /
• pp.269-289
• /
• 2010

The present study reports on a study of the development of customized intensive in-service English teachers training programs (IIETTP) reflecting on the demands of elementary/secondary school English teachers. For the purpose of study, a survey was conducted with 1,033 English teachers at elementary/secondary schools across the country. The results showed by and large no significant differences by school level, albeit some slight differences were revealed such as in training times, training methods, the percentages of teaching English in English (TEE), and other things. Since the two IIETTP models are presented as basic formats, they can be modified and applied according to the contexts of schools and the demands of trainees.