• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.248-250
• /
• 1987

Transparent CdS films with low electrical restivity on glass substrates were prepared by coating a CdS slurry which contained 10 wt.% $CdCl_2$, and sintering in a nitrogen atmosphere at $600^{\circ}C$ for 2hr. All-polycrystalline CdS/CdTe solar cells were fabricated by coating CdTe slurries, which contained 1.0 or 4.5 wt.% $CdCl_2$, on the sintered CdS films and sintering at $700^{\circ}C$ for various periods of sintering. The spectral responses of the sintered CdS/CdTe solar cells were measured and compared with theoretically calculated quantum efficiency. The spectral responses of the sintered CdS/CdTe solar cells in the short-wavelength region decreases with-increasing sintering time. The poor response in this region is attributed to the existence of the Cd-S-Te solid solution in the compositional junction. The decrease in the maximum response in the long-wavelength region as the sintering exceeds certain time appears to be caused by the increase in the depth of the buried homo junction and by the increase in the series resistance. The $CdCl_2$ in the CdTe layer during sintering enchances the interdiffusion of S, Te or donor impurities across the metallurgical Junction causing the formation of deeper n-p junction in the CdTe layer.

• 마이크로전자및패키징학회지
• /
• 제15권3호
• /
• pp.1-8
• /
• 2008

환원분위기 열처리가 진공증착법으로 형성한 $(Bi,Sb)_{2}Te_3$박막의 열전특성에 미치는 영향을 연구하였다. 환원분위기(50% $H_2$ + 50% Ar)에서 $300^{\circ}C$의 온도로 2시간 유지하여 열처리함으로써 $(Bi,Sb)_{2}Te_3$박막의 결정성이 크게 향상되었으며 결정립 크기가 크게 증가하였다. 환원분위기 열처리에 의한 정공농도의 감소에 기인하여 $(Bi,Sb)_2Te_3$박막의 Seebeck계수가 열처리 전의 $\sim90{\mu}V/K$로부터 $\sim180{\mu}V/K$으로 증가하였다. 환원분위기 열처리에 의해 $(Bi,Sb)_{2}Te_3$ 박막의 출력인자(power factor)가 5배에서 16배 정도 향상되었으며, 환원분위기 열처리 후 $(Bi,Sb)_{2}Te_3$ 박막은 $18.6\times10^{-4}W/K^{2}-m$의 최대 출력인자를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.169-170
• /
• 2008

In this study, low temperature sintering property of the $0.6TiTe_3O_8-0.4MgTiO_3$ ceramics with sintering adds were investigated for LTCC application which enable to cofiring with Ag electrode. $TiTe_3O_8$ mixed with $MgTiO_3$ to improve the temperature property. In the X-ray diffraction patterns, the columbite structure of $TiTe_3O_8$ phase and ilmenite structure of $MgTiO_3$ phase were coexisted in all specimens. In the case of SnO addition, the bulk density and dielectric constant were increased but quality factor was decreased with amount of SnO additions. The TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3$+xwt%SnO ceramics were shifted to negative direction. The dielectric constant, quality factor and TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3$ ceramics with 2.5wt% addition of SnO sintered at $830^{\circ}C$ for 1hr were 29.86, 35,800 GHz, -0.58 ppm/$^{\circ}C$, respectively.

• Korean Journal of Acupuncture
• /
• 제26권3호
• /
• pp.13-25
• /
• 2009

Objectives : This study was performed to investigate acupoints and muscles used for cosmetic acupuncture. We want most clinicians practicing cosmetic acupuncture to understand theoretical background well and to treat cosmetic diseases more diversely by this paper. Methods : We collected useful informations from some books and websites about cosmetic acupuncture and thus could select major acupoints and muscles. Conculsions : The most frequently used acupoints for cosmetic acupoints are as follows ; LI20, ST1, ST2, ST3, ST4, ST5, ST6, ST7, ST8, SI18, SI19, BL1, BL2, BL3, BL4, TE17, TE18, TE19, TE20, TE21, TE22, TE23, GB1, GB2, GB3, GB4, GB5, GB6, GB7, GB8, GB13, GB14, GV20, GV21, GV22, GV23, GV24, GV25, GV26 and CV24. And head and neck muscles including SCM muscle, plastyma, frontalis, corrugator supercilii, orbicularis oculi, auricularis, temporalis, masseter, pterygoid, zygomaticus and risorius can be used for cosmetic acupuncture. Most acupoints and muscles are located in face and head, which seemed to be concerned with formation of face wrinkles.

• 한국재료학회지
• /
• 제13권3호
• /
• pp.195-199
• /
• 2003

The $p-CdIn_2$$Te_4$single crystal was grown in the three-stage vertical electric furnace by using Bridgman method. The quality of the grown crystal has been investigated by the x-ray diffraction and the photoluminescence measurements. From the photoluminescence spectra of the as-grown $CdIn_2$$Te_4$crystal and the various heat-treated crystals, the ($D^{\circ}$, X) emission was found to be the dominant intensity in the photoluminescence spectrum of the $CdIn_2$T $e_4$:Cd, while the ($A^{\circ}$, X) emission completely disappeared in the $CdIn_2$T $e_4$:Cd. However, the ($A^{\circ}$, X) emission in the photoluminescence spectrum of the $CdIn_2$T $e_4$:Te was the dominant intensity like an as-grown $CdIn_2$T $e_4$crystal. These results indicated that the ($D^{\circ}$, X) is associated with $V_{Te}$ acted as donor and that the ($A^{\circ}$, X) emission is related to $V_{cd}$ acted as acceptor, respectively. The $p-CdIn_2$T $e_4$crystal was found to be obviously converted into the n-type after annealing in the Cd atmosphere. The origin of ( $D^{\circ}$, $A^{\circ}$) emission and its TO phonon replicas is related to the interaction between donors such as $V_{Te}$ or $Cd_{int}$, and accepters such as $V_{cd}$ or T $e_{int}$. Also, the In in the $CdIn_2$X$CdIn_4$was confirmed not to form the native defects because it existed in the stable form of bonds.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.77.1-77.1
• /
• 2010

반도체 나노 결정은 크기와 모양에 따라 다른 광학적 전기적 성질을 보이는 독특한 특성 때문에 태양전지, 발광 다이오드, 레이저, 바이오메디컬 레이블링 등에 응용될 수 있는 저가격의 차세대 광전기 재료의 개발을 위한 구조체로 각광받고 있다. 최근에는 하나의 나노 결정에 type-II band offset을 가지는 두 개의 물질을 결합한 이종접합 나노 결정체의 연구가 활발하게 진행되고 있는데, 이는 나노 결정 내에서 빛에 의해 생성된 전하들을 공간적으로 분리해 낼 수 있는 장점을 가지고 있기 때문에 태양전지나 광촉매로의 응용에 매우 유용하다. 우리는 나노 결정과 고분자 하이브리드 태양전지의 제작에 있어서 성분과 type-II 이종접합 반도체 나노 결정의 영향을 조사하기 위하여 CdSe, CdTe, type-II CdTe/CdSe tetrapod을 합성하였다. CdSe tetrapod과 P3HT의 블렌딩에 의해 만들어진 태양전지는 AM 1.5, 100mW/$cm^2$ 조건에서 1.03%의 가장 높은 변환 효율, 그리고 415nm에서 43%의 IPCE를 나타내었다. 그리고 CdTe/CdSe type-II tetrapod 이종접합과 P3HT 블렌딩으로 만들어진 태양전지는 CdTe를 이용하여 만든 태양전지에 비해 4.4배의 변환효율과 3.9배의 단락전류를 나타내었다.

• Transactions on Electrical and Electronic Materials
• /
• 제4권5호
• /
• pp.15-18
• /
• 2003

The Cd$\_$1-x/Zn$\_$x/Te film was produced by thermal evaporation for the flat-panel X-ray detector. The crystal structure and the surface morphology of poly crystalline Cd$\_$1-x/Zn$\_$x/Te film were examined using XRD and SEM, respectively. The leakage current and X-ray sensitivity of the fabricated films were measured to analyze the X-ray response characteristic of Zn in a polycrystalline CdZnTe thin film. The leakage current and the output charge density of Cd$\_$0.7/Zn$\_$0.3/Te thin film were measured to 0.3 1nA/$\textrm{cm}^2$ and 260 pC/$\textrm{cm}^2$ at an applied voltage of 2.5 V/$\mu\textrm{m}$, respectively. Experimental results showed that the increase of Zn doping rates in Cd$\_$1-x/Zn$\_$x/Te detectors reduced the leakage current and improved the X-ray sensitivity significantly. The leakage current was drastically diminished by the formation of thin parylene layer in the Cd$\_$0.7/Zn$\_$0.3/Te detector.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.8-13
• /
• 2002

Controlled precipitation of quasi-binary semiconductor system is newly proposed as an effective and reliable technique for the formation of well-defined and crystallographically aligned semiconductor nanostructures. Using HgTe-PbTe quasi-binary semiconductor system, self-aligned HgTe nanocrystallites distributed three dimensionally within PbTe matrix were successfully formed by the simple three step heat treatment process routinely found in age hardening process of metallic alloys. Examination of the resulting nano precipitates using conventional transmission electron microscopy (CTEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the (100) habit planes making a crystallographic relation of {100}$\_$HgTe///{100}$\_$PbTe/ and [100]$\_$HgTe///[100]$\_$PbTe/. It is also found that the precipitate undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4-5 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for preparing desirable quantum-dot nanostructures.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.60-62
• /
• 2004

CdTe nanoparticles were synthesized in aqueous solution by colloidal method. The absorption and photoluminescence(PL) spectrum of the synthesized CdTe nanoparticles revealed the strong exitonic peak in the visible region. Electroluminescence of CdTe nanoparticles were observed in the structure of Al/CdTe/PVK/ITO and Al/CdTe/PEDOT/ITO that were fabricated by spin coating of polyvinylcarvazole(PVK), poly(3,4-ethylenedioxythiophene(PEDOT) and CdTe nanoparticles. The turn-on voltages of Al/CdTe/PVK/ITO and Al/CdTe/PEDOT/ITO for electroluminescence were 5V and 6V, respectively. We identified that the reduction of turn-on voltage resulted from the increase of hole injection into the hole transport layer due to lower ionization energy of PEDOT.

• 한국결정성장학회지
• /
• 제14권4호
• /
• pp.140-144
• /
• 2004

Hot-wall epitaxy법으로 GaAs 기판 위에 성장시킨 CdTe 박막은 (III) 면의 단결정 박막으로 성장되었음을 XRD 측정으로부터 확인하였으며, 박막 성장률은 SEM 측정 사진으로부터 30 $\AA/s$임을 알았다. PL 측정으로 얻은 최적성장조건은 원료물질 온도 $500^{\circ}C$, 기판 온도 $320^{\circ}C$이었다.