• Investigative Magnetic Resonance Imaging
• /
• v.1 no.1
• /
• pp.109-113
• /
• 1997

Purpose: To evaluate the differences of functional imaging patterns between conventional spoiled gradient echo (SPGR) and echo planar imaging (EPI) methods in cerebral motor cortex activation. Materials and Methods: Functional MR imaging of cerebral motor cortex activation was examined on a 1.5T MR unit with SPGR (TRfrE/flip angle=50ms/4Oms/$30^{\circ}$, FOV=300mm, matrix $size=256{\times}256$, slice thickness=5mm) and an interleaved single shot gradient echo EPI (TRfrE/flip angle = 3000ms/40ms/$90^{\circ}$, FOV=300mm, matrix $size=128{\times}128$, slice thickness=5mm) techniques in five male healthy volunteers. A total of 160 images in one slice and 960 images in 6 slices were obtained with SPGR and EPI, respectively. A right finger movement was accomplished with a paradigm of an 8 activation/ 8 rest periods. The cross-correlation was used for a statistical mapping algorithm. We evaluated any differences of the time series and the signal intensity changes between the rest and activation periods obtained with two techniques. Also, the locations and areas of the activation sites were compared between two techniques. Results: The activation sites in the motor cortex were accurately localized with both methods. In the signal intensity changes between the rest and activation periods at the activation regions, no significant differences were found between EPI and SPGR. Signal to noise ratio (SNR) of the time series data was higher in EPI than in SPGR by two folds. Also, larger pixels were distributed over small p-values at the activation sites in EPI. Conclusions: Good quality functional MR imaging of the cerebral motor cortex activation could be obtained with both SPGR and EPI. However, EPI is preferable because it provides more precise information on hemodynamics related to neural activities than SPGR due to high sensitivity.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.1 s.51
• /
• pp.7-19
• /
• 2007

Four types of fluid inclusions are trapped within tourmaline from Daeyou pegmatite, Jangsu-Gun, Jeonllabukdo. They range $5{\sim}100\;{\mu}m$ in size and are grouped into I, II, III, and IV based on the phase behavior at the room temperature: (1) Type I inclusions are liquid-rich and NaCl equivalent salinity ranged $0{\sim}12\;wt%$, and the homogenization temperatures (Th) ranged $181{\sim}230^{\circ}C$ with eutectic temperatures (Te) $-54{\sim}-22^{\circ}C$. (2) Type II inclusions are vapor-rich and salinity ranged $3{\sim}8\;wt%$ NaCl, and Th ranged $177{\sim}304^{\circ}C$ also showing Te $-54{\sim}-29^{\circ}C$. (3) Type III inclusions contain a halite daughter mineral with $31{\sim}40\;wt%$ NaCl, Th $230{\sim}328^{\circ}C$. More than 90% of Type III homogenize by halite dissolution and are spatially associated with silicate melt inclusions. (4) Type IV inclusions are $CO_{2}$-bearing containing various daughter minerals such as sylvite and/or halite. The density of $CO_{2}$ system within the Type IV is $0.80{\sim}0.75\;g/cm^{3}$, Th $190{\sim}317^{\circ}C$, and salinity $2{\sim}35\;wt%$ NaCl. Type III fluid inclusions, considered as the earliest fluid, formed from the fluid exsolved from the crystallizing pegmatite. It is suggested that Type II fluid in the central part of tourmaline were exsolved earlier than Type I fluids in the margin indicating salinity fluctuation during the growth of tourmaline. It implies the fluctuation of the pressure since the salinity of fluid exsolved from the crystallizing melt is governed by the pressure. The last fluid was Type IV, which may be derived from the nearby limestone and metasedimentary rocks. It is suggested that Daeyou pegmatite containing muscovite without miarolitic cavities was formed by the partial melting resulted from the regional metamorphism. Subsequently, the exsolving fluids from the crystallizing melt were trapped in tourmaline at high pressure condition. The exsolved fluids contain various components such as $CaCl_{2}\;and\;MgCl_{2}$ as well as NaCl and KCl. The exsolution began at least at $2.7{\sim}5.3\;kbar\;and\;230{\sim}328^{\circ}C$ with the pressure fluctuation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.309-318
• /
• 2009

This study was conducted to investigate the cholesterol lowering and anti-obesity effects of an ethanol extract of broccoli sprouts (BS) in rats fed high fat diet. Male Sprague-Dawley rats weighing $150{\sim}155g$, were divided into 6 groups; a normal diet group (ND), a high fat diet group (HFD), a normal diet and BS with 200 mg/kg treated group (ND-BSL), a normal diet and BS with 400 mg/kg treated group (ND-BSH), a high fat diet and BS with 200 mg/kg treated group (HFD-BSL), and a high fat diet and BS with 400 mg/kg treated group (HFD-BSH). The body weight gain and mesenteric adipose tissue weight were increased by high fat diet, but gradually decreased to the corresponding level of ND group after administration of BS extract. The liver and epididymal adipose tissue weights of HFD group were the highest among the six groups, although the difference was not significant. Food intake was lower in high fat diet groups compared with normal diet groups. The serum ALT and AST activities that were elevated by the high fat diet were significantly decreased after BS administration. Levels of serum total cholesterol, LDL-cholesterol, triglyceride and the atherogenic index tended to be decrease in the BS administered groups compared with HFD group. However, HDL-cholesterol level in serum decreased in HFD group and markedly increased in BS administered groups. There were no differences in the contents of serum triglyceride, LDL-cholesterol and HDL-cholesterol between normal diet groups. Levels of total cholesterol and triglyceride in liver and adipose tissues were also lower in BS administrated groups than in HFD group. The activities of heparin-releasable lipoprotein lipase (HR-LPL) and total-extractable LPL (TE-LPL) in adipose tissue were increased in HFD group compared with the BS administered groups, but those of the ND-BSL group and ND-BSH group were similar to ND group. These results suggest that BS ethanol extract may exert cholesterol-lowering effect and potentially reduce lipid storage.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.3
• /
• pp.303-310
• /
• 1996

The objective of this study was to examine the effect of embryos development following IVF of in vitro-matured porcine oocytes treated with epidermal growth factor (EGF). When cumulus-enclosed oocytes were incubated in TCM 199 medium supplemented with (1) control group, (2) 10 ng/ml EGF, (3) 10${\mu}g$ml FSH and 10% FBS, or (4) 10 ng/ml EGF, 10 ${\mu}g$/ml FSH, and 10% FBS for 42 hr, the late developmental rates on NCSU (0.4% BSA) medium after fertilization were higher in (3) and (4) groups (13.4, 18.3%) than in (2) group (5.2%, p < 0.005), but (2) group is significantly higher than the development to blastocyst of oocytes of (1) group (1.2%). Also, when the cell number of total, ICM, and TE of those blastocysts at 6 day produced in vitro was investigated by double staining (PI and bisbenzimide), total cell number of (4) group (58.80${\pm}$ 11.90) was higher than that of (2) and (3) groups (42.17${\pm}$9.97, 49.07${\pm}$9.77, P < 0.05). ICM cell number of blastocysts of (4) group (11.69${\pm}$5.56) was higher than that of (2) and (3) groups (5.00${\pm}$4.24, 6.77${\pm}$4. 92, P < 0.05). Furthermore, the proportion of ICM in (4) group (19.0${\pm}$1.6) was higher than that in (2) and (3) groups (11.1${\pm}$3.0, 12. 7${\pm}$2.1). These results suggested that in vitromatured porcine oocytes treated with EGF alone can be developed to blastocyst, but high proportion on the development to blastocyst and number of total cell and ICM in blastocyst can be obtained when supplemented with additional FSH and FBS.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.8
• /
• pp.1175-1182
• /
• 2017

Objective: To create genetically modified goat as a biopharming source of recombinant human lacotoferrin (hLF) with transcription activator-like effector nucleases. Methods: TALENs and targeting vector were transferred into cultured fibroblasts to insert hLF cDNA in the goat beta-lactoglobulin (BLG) locus with homology-directed repair. The gene targeted efficiency was checked using sequencing and TE7I assay. The bi-allelic gene targeted colonies were isolated and confirmed with polymerase chain reaction, and used as donor cells for somatic cell nuclear transfer (SCNT). Results: The targeted efficiency for BLG gene was approximately 10%. Among 12 Bi-allelic gene targeted colonies, five were used in first round SCNT and 4 recipients (23%) were confirmed pregnant at 30 d. In second round SCNT, 7 (53%), 4 (31%), and 3 (23%) recipients were confirmed to be pregnant by ultrasound on 30 d, 60 d, and 90 d. Conclusion: This finding signifies the combined use of TALENs and SCNT can generate biallelic knock-in fibroblasts that can be cloned in a fetus. Therefore, it might lay the foundation for transgenic hLF goat generation and possible use of their mammary gland as a bioreactor for large-scale production of recombinant hLF.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.210-230
• /
• 1995

To compare the wear resistance of four kinds of commercial acrylic resin teeth [SR-Orthosit PosterioresR(Ivoclar Co., Liechtenstein), Endura PosteriorR(Shofu Inc. Japan), trubyte IPN teethR(Dentsply International Inc., York,), Trubyte BiotoneR(dentsply Inermational Inc. Brazil) by means of the toothbrush abrasion method, the artificial resin teeth were embedded in epoxy resin with the occlusal surfaces aligned in one plane for a total of 40 blocks. There after, each lock was mounted in the arm of the toothbrush abrasion machine(K 236, Japan). Wear measurements were made on the three preconditioned states. Those were as follows : no treatment specimens, thermocycled specimens, and thermocycled specimens which were immeresed applied load of 400g during the buring the brushing cycle. At the end of the 30,000-stroke cycle, each specimen was removed, and weighed. The microhardness of four kinds of commercial resin teeth were determined by means of microhardness tester. Microhardness tests were performed on te no treatment specimens, thermocycled specimens, and thermocycled specimens with immersion in the denture cleansing solution. Finally, the comparison of thermal properties were perfomed using differential scanning calorimeter(DSC-1500). The following results were obtained : 1. In the case of no treatment teeth, the wear amount of endura Posterior(EN) was the greatest among the others(p<0.01), and the wear amount of three kinds of artificial resin teeth was increased in the order of Trubyte IPN teeth(IN), Trubyte Biotone(BN), SR-Orthosit Posteriores(SN) but there was no statistic significance(p>0.01). 2. The wear amount of Trubyte IPN teeth(IT) and Trubyte Biotone(BT), was increased due to thermocycling effect, but that of Endura Posteriores(ET) was decreased conversely(p<0.01). 3. Except for the SR-Orthosit Posteriores(STC), the wear amount of three kinds of artificial resing teeth(that is, ETC, ITC, BTC) was increased due to denture cleansing solution$(Cledent^R)$, but there was no statistic significance(p>0.01). But the wear amount of the SR-Orthosit Posteriores(STC) was the greatest among the others(p<0.01). 4. The wear amount of toothbrush was the greatest in case of contact with occlusal surface of SROrthosit Posteriores resin teeth(p<0.01). 5. the microhardness values(KHN) of the SR-Orthosit Posteriores was the highest among the experimental artificial resin teeth(p<0.01). 6. There was no relationship between microhardness valuse(KHN) and wear amount of four kinds of experimental artificial resin teeth(p<0.01). 7. The differential canning calorimetric property of four kinds of artificial resin teeth did not show endothermal or exothermal peak in the range of $100^{\circ}C$

• Journal of Animal Science and Technology
• /
• v.52 no.4
• /
• pp.253-258
• /
• 2010

This study was conducted to compare the phenotypic performance and genetic merits in terms of weight at 12 months, carcass weight, eye muscle area, backfat thickness, marbling score and selection index of Hanwoo young bulls and proven bulls from the year 2004 to 2006. The data of 208 bulls used in this study were taken from the Nnational Hanwoo genetic evaluation coordinated by National Institute of Animal Science. Hanwoo young bulls were superior in the phenotypic performance of weight at 12 months, carcass weight, and eye muscle area showing significant differences from Hanwoo proven bulls in most comparisons. The backfat thickness of Hanwoo young bulls was significantly thicker higher than Hanwoo proven bulls in all comparisons (p < 0.05). Also, Hanwoo young bulls were not significantly different from Hanwoo proven bulls in the genetic merits of weight at 12 months, carcass weight, eye muscle area, backfat thickness, marbling score, and total genetic merits. Performance of Hanwoo young bulls were not significantly different from 1st class of Hanwoo proven bulls in all the traits studied except in eye muscle area.

• Journal of the Korean Vacuum Society
• /
• v.11 no.1
• /
• pp.68-75
• /
• 2002

It is observed the characteristic of the microwave air plasma in the wide range of the operating pressure, 1 mTorr ~ 760 Torr. The microwave air plasma was generated by an AC-type microwave source manufactured with a magnetron taken from a commertial microwave oven and the input power was fixed at 370 W. Characteristics of the plasmas were observed by an injection Langmuir probe and an OES(Optical Emission Spectroscopy). The breakdown electric field is drastically changed at 500 mTorr. For < 500 mTorr, the ratio of the breakdown electric field and the pressure decreased inversely to the pressure, $5.7\times10^4$V/m-Torr.However, the ratio increased linearly as 43 V/m-Torr for the operating pressure, > 500 mTorr. The minimum breakdown electric field was observed about 12. kV/m at 500 mTorr. It corresponds that the input frequency equals to the collision frequency. The effective collision cross section of the air at this pressure was calculated as $9.23\times10^{-l6}\textrm{cm}^2$.The results of the OES measurement revealed that the main ions were composed of the oxygen, argon, and nitrogen for > 500 mTorr. In contrast, only oxygen and argon ions were dominated for < 500 mTorr. ion temperature of oxygen (O(II)) in the air was decreased from about 1.2 eV to 0.5 eV as the pressure increased. Langmuir probe data shows that the plasma density for < 500 mTorr was higher that for > 500 mTorr.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.1062-1068
• /
• 1996

This study was Performed to determine the effects of antimutagenicity and anticancer of Taxus cuspidata produced in Korea. Extracts of Taxus cuspidata were obtained from leaves, barks and roots. All the samples tested had no effects on the mutagenicity by Ames test using Salmonella typhimurium TA98 and TA100 or rec-assay using Bacillus subtilis Hl7 and M45 strains. However the treatment of 50$\mu\textrm{g}$/plate of Taxus cuspidata extracts showed strong antimutagenicity with 98% inhibition against TA100 induced by MNNG and with 98% inhibition against TA98 and TA100 induced by 4NQO whereas 73~89% and 16~60% antimutagenic effect were shown against both strain induced by Trp-P-1 and $Benzo(\alpha)pyrene,$ respectively. The treatment of $0.5$\mu\textrm{g}$/{\mu}\ell$ root extracts had the highest cytotoxicity with 90% against liver cancer cell, Hep 3B, followed by bark extracts(87%) and leave extracts(72%), whereas $0.5$\mu\textrm{g}$/{\mu}\ell$ treatment of Taxus cuspidata extract had only 22~36% cytotoxicity on human normal liver cell WRL 68.

• Nuclear Engineering and Technology
• /
• v.38 no.2
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.