• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.255-261
• /
• 2004

The problem of geolocation using multiple satellites is to determine the position of a transmitter located on the Earth by processing received signals. The specific problem addressed in this paper is that of estimating the position of a stationary transmitter located on or above the Earth's surface from measured time difference of arrivals (TDOA) by a geostationary orbiting (GSO) satellite and a low earth orbiting (LEO) satellite. The proposed geolocation method is based on the total least squares (TLS) algorithm. Under erroneous positions of the satellites together with noisy TDOA measurements, the TLS algorithm provides a better solution. By running Monte-Carlo simulations, the proposed method is compared with the ordinary least squares (LS) approach.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.85-91
• /
• 2013

For location based service and context awareness services, accurate indoor positioning technology is essential. The TDOA method that uses the range difference between signal source and receivers for estimating the location of the signal source, has estimation error due to measurement error. In this paper, a new algorithm is proposed to select the real root among calculated roots using the range difference information, and the estimated position of the signal source shows good accuracy compared to the existing method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.121-131
• /
• 2015

Passive emitter localization is preferred to use a small number of receivers as possible for the efficiency of strategic management in the field of modern electronic warfare support. Accurate emitter localization can be expected when utilizing continuous measurable parameters and a appropriate combination of theirs. For this reason, we compare CRLB (Cramer-Rao lower bound) of two moving platform with various measurable parameters to choose a appropriate combination of parameters for a better localization performance. And we propose the passive emitter localization method based on Levenberg-Marquardt algorithm with combined TDOA/FDOA and DOA to achieve better accuracy of emitter localization which is located on the ground and stationary. In addition, we present a method for determining the initial emitter position for LM algorithm's input to avoid the divergence of estimation and local minimum.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.109-114
• /
• 2011

To estimate sound direction of arrival with a pair of microphones, a method based on Time Difference of Arrival (TDOA) estimation using the Cross Power Spectrum Phase (CPSP) function is largely used due to its simplicity and good performance. In this paper, we investigate CPSP maximum values for various SNRs and adverse environments, and propose a novel method to improve the estimation performance of sound direction of arrival. The proposed method applies a threshold to the CPSP values and increases the reliability of the estimated sound direction. Through computer simulation for various SNRs, we validate the effectiveness of the proposed method. When the threshold was set to 0.1, more than 90% of success rate of sound direction of arrival estimation has been achieved for directions of $10^{\circ}$, $40^{\circ}$, $70^{\circ}$ from the source location even with reverberation times of 0.1s.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.355-362
• /
• 2009

Sound source localization method based on the time delay of arrival(TDOA) is applied to many research fields such as a robot auditory system, teleconferencing and so on. When multi-microphones are utilized to localize the source in 3 dimensional space, the conventional localization methods based on TDOA decide the actual source position using the TDOAs from all microphone arrays and the detection measure, which represents the errors between the actual source position and the estimated ones. Performance of these methods usually depends on the number of microphones because it determines the resolution of an estimated position. In this paper, we proposed the localization method using spatially mapped GCC functions. The proposed method does not use just TDOA for localization such as previous ones but it uses spatially mapped GCC functions which is the cross correlation function mapped by an appropriate mapping function over the spatial coordinate. A number of the spatially mapped GCC functions are summed to a single function over the global coordinate and then the actual source position is determined based on the summed GCC function. Performance of the proposed method for the noise effect and estimation resolution is verified with the real environmental experiment. The mean value of estimation error of the proposed method is much smaller than the one based on the conventional ones and the percentage of correct estimation is improved by 30% when the error bound is ${\pm}20^{\circ}$.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.789-797
• /
• 2006

A new method for the GPS repeater based indoor positioning is proposed and its feasibility is verified by experiments in previous paper. But the problems how can identify switching GPS repeater's ID and when switching will be occurred are remained. To solve the problem faced with, we propose the time synchronized switching GPS repeater and the methods of the detection of switching time and the estimation of TDOA. First, switching GPS repeater retransmits the signals synchronized on GPS time, sequentially. Always, first switching time is synchronized with 1 PPS. Second, we formulate the detection of switching time and the estimation of TDOA and propose the various methods. No method is existed absolutely superior to others in any conditions but the method is existed superior to others in specific condition. Finally, feasibility of indoor positioning using time-synchronized switching GPS repeater is evaluated through experiments in anechoic chamber and general environment with multipath.

• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.228-233
• /
• 2010

In this paper, the iteration localization algorithm that NLOS signal is iteratively removed to get the exact location in the wireless sensor network is proposed. To evaluate the performance of the proposed algorithm, TDOA location estimation method is used, and readers are located on every 150m intervals with rectangular shape in $300m{\times}300m$ searching field. In that searching field, the error distance is analyzed according to increasing the number of iteration, sub-blink and the estimated sensor node locations which are located in the iteration range. From simulation results, the error distance is diminished according to increasing the number of the sub-blink and iteration with the proposed location estimation algorithm in NLOS environment. Therefore, to get more accurate location information in wireless sensor network in NLOS environments, the proposed location estimation algorithm removing NLOS signal effects through iteration scheme is suitable.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.886-893
• /
• 2010

This paper considers the problem of time difference-of-arrival(TDOA) source localization when the TDOA and angle of arrival(AOA) measurements from an airborne emitter source are subject to ground-platform sensor position. The optimization of sensors' position is a challenging problem and a solution with good localization accuracy has yet to be found. This paper proposes an estimator that can achieve these purposes and provides optimized sensor position for good localization accuracy using the proposed estimator. The developed algorithm and sensor position are then examined under the special case of a single airborne source. The theoretical developments are supported by simulations.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2017

MLAT which is an independent cooperative surveillance system is applied to increase the positon resoultin of secondary survelliance radar. MLAT uses the hyperboic or hyperboloid position mesurement algorithm. Central processing unit of MLAT calculates target position using time difference of arrival (TDOA) which can be solved from time of arrival (TOA) information of each receivers (at least 4 receivers). To increase position resolution of MLAT which use TDOA, TOA which is transfer time from tranmitter to receiver shold be calculated with precision time resolution in receiver. This paper explained the MLAT system briefly and explained ATD which is one of means of calcuating pulse position. ATD is applied to solve the deviation of pulse position due to different amplitude of signals in mulitiple receivers. In this paper, to analysis the performance of ATD, the simulation result of LAS and CDS was compared with the simulation result of basic threshold method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.8
• /
• pp.823-831
• /
• 2008

Since it needs the light computational load and small database, sound source localization method using time delay of arrival(TDOA method) is applied at many research fields such as a robot auditory system, teleconferencing and so on. Researches for time delay estimation, which is the most important thing of TDOA method, had been studied broadly. However studies about factors for time delay estimation are insufficient, especially in case of real environment application. In 1997, Brandstein and Silverman announced that performance of time delay estimation deteriorates as reverberant time of room increases. Even though reverberant time of room is same, performance of estimation is different as the specific part of signals. In order to know that reason, we studied and analyzed the factors for time delay estimation using speech signal and room impulse response. In result, we can know that performance of time delay estimation is changed by different R/D ratio and signal characteristics in spite of same reverberant time. Also, we define the performance index(PI) to show a similar tendency to R/D ratio, and propose the method to improve the performance of time delay estimation with PI.