• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.213-216
• /
• 2007

The paper deals with a approach to underwater acoustic based Ad-hoc communication, which allows major design strategies for Media Access Control (MAC) within a group of the autonomous underwater vehicles(AUV). The proposed MAC aims at deploying AUV-centric star topology, which minimizes overhead of sensor nodes and improves energy-efficiency. Furthermore, that is also well under long and unknown propagation delays of the underwater acoustic medium. The implemented MAC protocol makes it easier to achieve frame synchronization than TDMA due to deploying localized schedule time, in addition to saving energy consumption by letting nodes sleep. It is also superior to MACA and MACAW in terms of propagation delay. This scalable centralized protocol has the potential to serve as a primer for development of MAC protocol for future underwater acoustic based ad-hoc networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1707-1717
• /
• 1998

Polyphase filtering techniques is used to suppress the narrowband jammer signal such as USDC TDMA overlaying the band occupied by DS-CDMA system. In the proposed jammer suppression, the received signal is separated into 64 subchannels in two stages by polyphase filtering and the location of the narrowband jammer signal is determined by measuring each subchannel power and the contaminated subchannels are simply blocked. The $E_{b}/N_{0}$ 0/ improvement of the CDMA system from jammer suppession was outstanding. The $E_{b}/N_{0}$ degradation in comparison with a performance of no jammer is around 0.8dB in the worst case. The results are also compared with those of linear prediction jammer suppression. The implementation of the ployphase jammer suppression requires great amount of data processing and computation compared to linear predication filter. Thus it is more appropriate to implement with a ASIC rather than WITH several DSPs for user terminals of forward link.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.795-806
• /
• 1996

A structure which transmits and receives 3 subscribers packet data through an optical splitter node in an optical subscriber network of PON wave suggested and realized. All the functions which are necessary to use PON structure such as 155.52Mb/s multiplexer/demultiplexer of down-stream signal, 25.92Mb/s multiplexer/demultiplexer of up-stream signal, frame synchronizer, and phase aligner for aligning phase of the clock and received data have been integrated within 2 ICs using CMOS technonology. TDMAtechnology was suggested for up-stream transmission. In the optical up-stream transmission of the urst signals transmissionquality degradataion by APC and AGC of optical tranceiver was observed. By compensating the degradation, more than 17dB of link budget which is enough to satisfy 11.2dBthat is required in SWAN of PON architecture has been obtained with optical transceiver whose power and sensitivity are -17dBm and -34dBm respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.1
• /
• pp.51-60
• /
• 1991

The aim of this study is to investigate the heat transfer characteristics in the transient cooling process of a high temperature wall. The slow transient cooling experiment was carried out with a copper block of high thermal capacity. The results of these experiments are as follows. 1. Temperature histories measured by the thermocouple, which is 0.99, 2.00, 2.99mm from the heat transfer surface showed monotonous during the cooling process. These variation are the curves of typical temperature histories in film-boiling, transition-boiling, and nucleate-boiling regions. 2. The temperature histories were measured by thermocouple installed in the copper block. The variations of the surface heat fluxes and surface temperature were computed from the numerical solution method TDMA from the measured temperature histories for radial position one dimensional heat transfer inverse problem. The boiling curves were found by the computed temperature histories. 3. The rewetting point which starts to change from film boiling to nucleate boiling is not connected with the mass velocity and it were found that the temperature of rewetting point indicated about $100^{\circ}C$. 4. The heat flux of rewetting point was about $10^5Kcal/m^2h$, at that time, the heat transfer coeficient indicated about $1000Kcal/m^2h^{\circ}C$ irrelevent to mass velocity. 5. The wall superheat decreases as the pressure increases. But I found that rewetting point appeared under higher condition in the wall temperature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1447-1453
• /
• 2014

Wireless Body Area Networks (WBAN), standardized as IEEE 802.15.6, enable digital devices on/around the human body to communicate with one another. WBAN is essentially a person's piconet consisting of a master (mobile) device and several slave devices, which follows his/her mobility pattern, and hence, occasionally collides with another piconet as people meet or pass by. As such, a mechanism to detect collision and avoid interference is needed for intra-piconet communications. In this paper, we focus on this notorious problem of piconet collision and propose Distributed Time Division Piconet Coexistence (DTDPC) using local time offset exchange as a simple, attractive solution. The proposed DTDPC provides different level of services for various applications. Besides our simulation results have shown that the proposed solution outperforms the conventional CSMA protocols.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.338-347
• /
• 2017

This paper describes the design and fabrication of a high power amplifier which is a component of TDL(Tactical Data Link) aircraft terminal. We applied high-speed frequency hopping technology, cognitive radio technology, and receive filter bank technology to efficiently use limited frequency resources with radar and other communication equipment using the same frequency band. The high-power amplifier is physically composed of a transmitter, a receiver, a mechanical part, and a cable assembly, and is designed to meet temperature characteristics and electrical characteristics such as maximum transmission distance and reception sensitivity. Modeling and simulator were used to satisfy the requirement of high power amplifier. The transmit power and the noise figure were measured at 50.02dBm and 2.682dB, respectively. It was confirmed that all the required specifications were satisfied in the electrical characteristics test and the environmental characteristic test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.583-591
• /
• 2011

We presents the architecture of the 2.5 Gbps hybrid PON link which can increase of the transmission distance and link capability, and split ratio by using a colorless DWDM-PON and O/E/O based reach extender into an existing G-PON link. A RSOA based DWDM-PON to apply the feeder fiber can provide a link capacity of 32 larger that of a legacy G-PON. The reach extender converts the wavelength of DWDM-PON to G-PON through GTC frame regeneration at the remote node, and can provide a burst reset signal in order to extract upstream burst signal, simultaneously. The proposed hybrid PON enable a legacy G-PON to operate over the maximum 60 km distance with a 128-way split per WDM wavelength.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.471-476
• /
• 2015

In this paper, we propose an energy efficient hybrid MAC protocol for multi-hop wireless sensor networks. The proposed MAC protocol used a hybrid mechanism, in which contention-based MAC protocol and contention free MAC protocol are combined. The sensor nodes located far from the sink node usually send few data packet since they try to send measured data by themselves. So contention-based MAC protocol is useful among them. But other nodes located near sink node usually have lots of data packets since they plays as a relay node. Contention-based MAC protocol among them is not suitable. Using contention-based MAC protocol in heavy data traffic environment, packet collisions and transmission delay may increase. In this paper, slot assignment between sender nodes by sink node is used. The proposed mechanism is efficient in energy and latency. Results showed that our MAC protocol outperformed other protocol in terms of data packet delivery delay and energy consumption.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.425-431
• /
• 2009

Recently, new technology has been introducing according to the efforts for maritime safety, traffic and environmental protection that uses electronic method to make use of maritime information effectively. To be associated with the tendance, international society which centered to IALA Introduces advanced technology of AtoN with Automatic Identification System(AIS) that it is crucial method to collect and transmit maritime data. This article is to thoroughly analyse and investigate the international and national regulation of related AtoN AIS, and propose to be included and applied into national radio-communication equipment regulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4002-4014
• /
• 2015

ITU-R M.1842-1, as a well-known specification dedicated to maritime mobile applications, has standardized wireless transmission protocols according to the particular characteristics of a maritime communications scenario. A time division multiple access (TDMA) frame structure, along with modulation schemes to achieve a high data rate, has been described clearly in ITU-R M.1842-1. However, several specification items are still under "to be decided" status, which brings ambiguity to research works. In addition, the current version of ITU-R M.1842-1 is focused mainly on maritime transmissions in open-sea areas, where the cyclic prefix (CP) is set to zero and only 16-QAM is used in the multi-carrier (MC) system. System performance might be dramatically degraded in coastline areas due to the inter-symbol interference (ISI) caused by selective fading. This is because there is a higher probability that the signal will be reflected by obstacles in coastline areas. In this paper, we introduce the transmission resource block (TRB) dedicated to ITU-R M.1842-1 for a ship ad-hoc network (SANET), where the pilot pattern of TRB is based on the terrestrial trunked radio (TETRA). After that, we evaluated SANET performance under the maritime channel model in a coastline area. In order to avoid noise amplification and to overcome the ISI caused by selective fading, several strategies are suggested and compared in the channel estimation and equalization procedures, where the link-level simulation results finally validate our proposals.