• Atmosphere
• /
• v.26 no.3
• /
• pp.413-421
• /
• 2016

Climate Analysis Seoul (CAS) which provides gridded data relevant for thermal assessment was applied to one of the urban green areas, the Seonjeongneung, in Seoul, Korea. The thermal environment in the Seonjeongneung was evaluated from the CAS simulation for the five heat-wave issued cases during the last five years (2011~2015). The CAS has been improved continuously since it was developed. An updated version with a higher resolution of the CAS simulation domain and an addition of the vegetation information was used in this study. The influence of vegetation in the Seonjeongneung is estimated through the amount of the cold air generation ($Q_{ca}$) and air temperature deviation at each grid points, which are calculated by incorporating Geographic Information System (GIS) analysis on the simulation domain and meteorological analysis with the METeorology and atmospheric PHOtochemistry mesoscale MODel (MetPhoMod) in the CAS. The average amount of the cold air generation ($Q_{ca}$) at the Seonjeongneung is about $25.5m^3m^{-2}h^{-1}$ for the whole cases, and this value is similar to the ones in a forest or a well-wooded region. The average value of the total air temperature deviation (TD) is $-2.54^{\circ}C$ at the Seonjeongneung for the five cases. However, this cooling effect of the urban green area disappeared when the region is replaced by high-rise buildings in the CAS simulation. The $Q_{ca}$ drastically decreases to about $1.1m^3m^{-2}h^{-1}$ and the average TD shows an increase of $1.14^{\circ}C$ for the same events. This result shows that the vegetation in the Seonjeongneung supposes to keep down temperature during the heat-wave issued day and the average cooling effect of the green region is $3.68^{\circ}C$ quantitatively from the TD difference of the two simulations. The cooling effect represented with the TD difference is larger than $0.3^{\circ}C$ within 200 m distance from the boundary of the Seonjeongneung. Further improvements of the thermodynamical and advection processes above the model surface are required to consider more accurate assessment of the cooling effect for the urban green area.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.169-170
• /
• 1989

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.248-254
• /
• 2000

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.175-178
• /
• 2004

Little study has been published specifically addressing the dynamics of nitrate reducing bacteria (NBR) during the bioremediation of nitrate-contaminated aquifer. In our previous study we successfully quantified fumarate-enhanced microbial nitrate reduction rate in a nitrate-contaminated aquifer by using a series of single-well push-pull tests (PPTs). In this study we analyzed the suspended population during PPTs. To monitor changes in the microbial community, PCR amplification of 16S rDNA genes and denaturing gradient gel electrophoresis (DGGE) were used to study the dynamics of the bacterial community in detail. Before the stimulation of NBR, the dominant DGGE bands obtained by PCR were affiliated with V-Proteobacteria consisting of Acinetobacter spp. and Pseudomonas fluorescens. However, as NBR biostimulation proceeded, the dominant patterns of DGGE bands changed, and they were affiliated with Azoarcus denitrificans Td-3 and Flavobacterium xanthum. Azoarcus denitrificans Td-3 is known to completely reduce nitrate to nitrogen gas. The series of single-well push-pull tests in this study should prove useful for conducting rapid, low-cost feasibility assessments for in situ denitrification and provide important information about which microorganisms play a key role in bioremediation of a nitrate contaminated aquifer.

• The Journal of Korean Physical Therapy
• /
• v.27 no.2
• /
• pp.106-111
• /
• 2015

Purpose: Impaired reaching movement is commonly observed in children with cerebral palsy. The purpose of this study was to determine whether the inclination of seat surface can influence the reaching movement in children with spastic diplegic cerebral palsy (CP). Methods: The subjects were 31 children, 16 children with spastic bilateral CP and 15 typically developing (TD) children. The children performed static sitting and forward reaching under three conditions: a horizontal seat surface (Horizontal $0^{\circ}$), a seat surface inclined anterior 15 degrees (Ant $15^{\circ}$), and a seat surface inclined posterior 15 degrees (Post $15^{\circ}$). A 3-axis accelerometer ('ZSTAR3') was used for analysis of the reaching movement. A 3-axis accelerometer was attached on the manubrium of the sternum, lateral epicondyle of the humerus, and styloid process of the ulna. We measured the reaction time, movement time, and data amount during reaching the 8 cm target with an index finger on the three inclined seat surfaces. Results: Reaction time and movement time for CPs showed significant delay; comparing the TD's and CP's amount was significantly greater than the TD's during reaching task (p<0.05). In particular, CP's reaction time and movement time on a seat surface inclined Ant $15^{\circ}$ was significantly more delayed compared with the other seat surfaces (p<0.05). Conclusion: Our results suggest that seat-inclination intervention may provide an ergonomic approach for children with spastic cerebral palsy.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.374-379
• /
• 2015

Mullite-matrix and $Al_2O_3$-matrix composites were fabricated with 30 wt% hydroxyapatite (HA) and tricalcium phosphate (TCP), respectively, as additives to give bioactivity. A diphasic gel process was employed to lower the densification temperature of the mullite matrix to $1320^{\circ}C$. A polymer complexation process was used to synthesize a TCP powder that was fully densified at $1250^{\circ}C$, for application to the matrix. For the HA/mullite composite, HA decomposed during sintering by reactions with the matrix components of $Al_2O_3$ and $SiO_2$, resulting in a mixture of $Al_2O_3$, TCP, and other minor phases with a low densification of less than 88% of the theoretical density (TD). In contrast, the TCP/$Al_2O_3$ composite was highly densified by sintering at $1350^{\circ}C$ to 96%TD with no reaction between the components. Different from the TCP monolith, the TCP/$Al_2O_3$ composite also showed a fine microstructure and intergranular fracture, both of which characteristics are advantageous for strength and fracture toughness.

• Nuclear Engineering and Technology
• /
• v.21 no.4
• /
• pp.332-340
• /
• 1989

Destructive examination of 14$\times$14 PWR fuel burned for 3 cycles are carried out to investigate the in-reactor fuel performance. The results obtained are as follows; 1) Grain growth is not occured at the fuel center. 2) Fuel density is decreased as the turnup increase, the density is down to 94.4% TD at burnup of 36,000 MWD/MTU. 3) Average thickness of oxide layer on cladding is less than 10 $\mu$m in the lower and middle section, while it is rapidly increased above 20 $\mu$m in the upper section. 4) The rate of hydride production in the cladding is large in the upper section than lower section and is related to the production of oxide on the cladding

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.5
• /
• pp.54-63
• /
• 2000

In this paper, we implemented cyber character that can do speech recognition, speech synthesis, Motion tracking and 3D animation. For speech recognition, we used Discrete-HMM algorithm with K-means 128 level vector quantization and MFCC feature vector. For speech synthesis, we used demi-syllables TD-PSOLA algorithm. For PC based Motion tracking, we present Fast Optical Flow like Method. And for animating 3D model, we used vertex interpolation with DirectSD retained mode. Finally, we implemented cyber character integrated above systems, which game calculating by the multiplication table with user and the cyber character always look at user using of Motion tracking system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.582-586
• /
• 2005

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition (MOCVD) and study the physical properties of the GaN layer. We have also investigate the effect of the SiN mask on its optical property. By inserting a SiN mask, (102) the full width at half maximum (FWHM) decreased from 480 arcsec to 409 arcsec and threading dislocation (TD) density decreased from $3.21\times10^9\;cm^{-2}\;to\;9.7\times10^8\;cm^{-2}$. The PL intensity of GaN with SiN mask improved 2 times to that without SiN mask. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GaN layer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1846-1855
• /
• 2015

In this paper, a precise relative positioning with TD(time differenced) carrier phase measurements from a low-cost GNSS(Global Navigation Satellite System) receiver is proposed and analysed. The proposed method is using carrier phase measurement from a single GNSS receiver that reference receiver is not required and stand alone positioning is possible. TD operation removes the troublesome integer ambiguity resolution problem, and if the time interval is short, other error, such as, ionospheric, tropospheric delay and ephemeris error are effectively eliminated. The error analysis of the proposed method shows that a precise and positioning with carrier phase is possible. The implemented system is evaluated using a real car experiments. The results show that the horizontal positioning error was less than 3m during 10 minutes experiments, which is 4 times more precise than the results of normal code based absolute positioning.