• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.129-137
• /
• 2016

Transmission Control Protocol as a transport layer protocol provides steady data transfer service. There are some serious concerns about the performance of TCP over diverse networks. The vital concern in TCP network environment is congestion which may occur due to quick transmission rates or because of large number of new connections entering the network at the same time. Size of queues in routers grows thus resulting in packet drops. Retransmission of the dropped packets, and reduced throughput can prove costly. Explicit Congestion Notification (ECN) in conjunction with Active Queue Management mechanisms (AQM) such as Random early detection (RED) is used for packet marking rather than dropping. In IP packet header ECN bits can be added as a sign of congestion thus avoiding needless packet drops. The proposed ECN and AQM mechanism can be implemented with help of ns2 simulator and the performance can be tested on different TCP variants.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.392-401
• /
• 2007

Wireless network has high BER characteristic because of path loss, fading, noise and interference. Many packet losses occur without any congestion in wireless network. Therefore, many wireless TCP algorithms have been proposed. SNOOP, one of wireless TCP algorithms, hides packet losses for Fixed Host and retransmits lost packets in wireless network. However, SNOOP has a weakness for bust errors in wireless network. This paper proposes the SACK-SNOOP to improve TCP performance based on SNOOP and Freeze-TCP that use ZWA messages in wireless network. This message makes FH stop sending packets to MH. BS could retransmit error packets to MH for this time. SACK-SNOOP use improved Selective ACK, thereby reducing the number of packet sequences according to error environment. This method reduces the processing time for generation, transmission, analysis of ACK. This time gain is enough to retransmit local burst errors in wireless link. Furthermore, SACK-SNOOP can manage the retransmitted error by extending delay time to FH. The simulation shows that our proposed protocol is more effective for packet losses in wireless networks.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.295-300
• /
• 2007

The Linux-based embedded systems such as mobile telephones. PDAs and MP3 players are widely in use. USB(Universal Serial Bus) is the interface for data communication between the computers and these peripheral devices. Some embedded systems like intelligent home networking and multimedia streaming require guaranteed QoS(Quality of Service), which is needed for real time transmission of UDP/IP messages through USB. Although USB Ethernet driver is supported by USB Gadget API in Linux, it is unable to provide the desirable QoS required by each type or small embedded systems due to the unpredictability or TCP/IP Stack in Linux. This paper proposes IP-Over-USB to improve QoS of UDP/IP message transmission in the embedded systems using USB in Linux system.

• Journal of Navigation and Port Research
• /
• v.27 no.3
• /
• pp.283-288
• /
• 2003

Recently, the growth of applications and services over high-speed Internet increases, ATM networks as wide area back-bone has been a major solution. As the conventional TCP/IP suite is still the standard protocol used to support upper application on current. Internet, the issues regarding whether TCP/IP will operate efficiently on top of an ATM infrastructure and how to control its QoS still remain for studies. TCP uses a window-based protocol for flow control in the transport layer. When TCP uses the UBR service in ATM layer, the control method is only buffer management. If a cell is discarded in ATM layer, one whole packet of TCP will be lost; this fact occur the most TCP performance degradation. Several dropping strategies, such as Tail Drop, EPD, PPD, SPD, FBA, have been proposed to improve the TCP performance over ATM. In this paper, to improve the TCP performance, we propose a packet dropping scheme that is based on comparison with EPD, SPD and FBA. Our proposed scheme is applied to schemes discussed in the previous technology. Our proposed scheme does not need to know each connection's mean packet size. When the buffer exceeds the given threshold, it is based on comparison between the number of dropped packet and the approved packet. Our results are reported and discussed for comparing these discarding schemes under similar conditions. Although the number of virtual channel (VC) is increased, the simulation results showed that the proposed scheme can allocate more fairly each VC than other scheme.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.285-290
• /
• 2018

Vehicular ad hoc network (VANET) is one of the future communication technologies in which it offers safe-driving information and Internet access for both drivers and passengers by communicating among cars on the road. In case of applying Content Centric Network (CCN) rather than TCP/IP over VANET, called VCCN, it can provide efficient multicast communication of shared information among participating cars as well as offer corresponding one-to-one communications. This paper introduces SUMO for simulating traffic flows, VANET for car-to-car ad hoc communications, and CCN for a future Internet architecture. In addition, it compares and analyses the transmission performance of moving cars over VCCN. According to the simulation results using SUMO and VCCN, the larger the packet size, the better the transmission performance. In addition, VCCN provides higher packet transmission rate than that of TCP/IP when the clients shares the same contents. Furthermore, the overall data reception rate exceeds the physical transmission channel rate.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2470-2478
• /
• 1999

In this paper, algorithm is proposed to forecast line utilization using SNMP MIB-II. We calculate line utilization using SNMP MIB-II on TCP/IP based Internet and suggest a method for forecasting a line utilization on the basis of past line utilization. We use a MA model taking difference transform among ARIMA methods. A system for orecasting is proposed. To show availability of this algorithm, some results are shown and analyzed about routers on real environments. We get a future line utilization using this algorithm and compare it ot real data. Correct results are obtained in case of being few data deviating from mean value. This algorithm for forecasting line utilization can give effect to line c-apacity plan for a manager by forecasting the future status of TCP/IP network. This will also help a network management of decision making of performance upgrade.

• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.91-98
• /
• 2001

TCP/IP based remote system using internet presented the method to access and control all the types of resources connected to network system over time and space. In this paper, We studied a resource control method through a mutual communication of a system association composed of service user, provider, and manager of the network system for the web based remote control system. The service users require the resources, and its providers are a variety of devices and digital electronic products which can provide the services in a network system. The service manager who operates the whole system performs the role to interconnect its users with its providers. Through an experiment, an implemented system confirmed flexibility, stability, and extensibility of the method presented in this paper.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2140-2142
• /
• 2003

Recently, TCP/IP on Ethernet protocol is in use environment of LAN have developed a single chip by hardware. Therefore, the study about the single chip applies to the system control application like information electronic appliances, manufacturing automation machine has been made progress. This paper is the development of experimental Client node and Serve node that can transfer input-output data needed on Network Control System Client node is a sensor part of control system, that is, an analog signal is applicable to output data convert AD through LAN. Server node data sended in client convert DA, and then it is applicable to driver of Control System, so it achieves its part. In this study, is prove that using TCP/IP construct Network Control System.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.31-39
• /
• 2015

This paper presents the static and kinematic positioning accuracy by the real-time GPS positioning modes of the low-cost GPS receivers using NTRIP-based augmentation service. For this, acquires both the raw measurements data of the field tests by LEA 6T GPS module of u-blox AG, and correction communication via NTRIP caster with RTKLIB as an open source program for GNSS solution. With computing the positions of the check points and road tracks by six kinds of GPS positioning modes which are Single, SBAS, DGPS, PPP, RTK, and TCP/IP_RTK, compared these results to the reference position of the check points. The position error average and rmse of the static test by GPS L1 RTK surveying showed $N=0.002m{\pm}0.001m$, $E=0.004m{\pm}0.001m$ in horizontal plane, and $h=-0.116m{\pm}0.003m$ in vertical, these results are very closed to the coordinates with the geodetic receiver. Especially, in case of the kinematic test with obstacles located on both sides of road, the computed track with ambiguity fixing showed very similar trajectory considerably from VRS network RTK mode. And also, evaluate and verify the performance of the TCP/IP_RTK mode developed based on TCP/IP protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.141-145
• /
• 2012

In a Ubiquitous sensor network environment, the sensor node is in general small and low price, and operating with power limited battery. The reliable TCP/IP protocol is used for transmitting sensed data from the sensor node. A new method was proposed in order to overcome the limitation of small embedded memory, but it is difficult to use for the case of frame error. In this paper, a new algorithm is proposed to manage the receiving frame error or loss, and it is appropriate to the sensor network to send sensed data periodically.