• Tuberculosis and Respiratory Diseases
• /
• v.82 no.4
• /
• pp.306-310
• /
• 2019

Background: Tuberculosis (TB) is increasing in immigrants. We aimed to investigate the current status of latent tuberculosis infection (LTBI) treatment for North Korean Refugees (NKR) compared to South Koreans Contacts (SKC). Methods: TB close contacts in a closed facility of SKC and NKR who underwent LTBI screening in a settlement support center for NKR were analyzed retrospectively. Results: Among tuberculin skin test (TST) ${\geq}10mm$ (n=298) reactors, the males accounted for 72.2% in SKC (n=126) and 19.5% in NKR (n=172) (p<0.01). The mean age was higher in South Korea ($42.8{\pm}9.9years$ vs. $35.4{\pm}10.0years$, p<0.01). Additionally, the mean TST size was significantly bigger in NKR ($17.39{\pm}3.9mm$ vs. $16.57{\pm}4.2mm$, p=0.03). The LTBI treatments were initiated for all screened NKR, and LTBI completion rate was only 68.0%. However, in NKR, LTBI treatment completion rate was significantly increased by shorter 4R regimen (odds ratio [OR], 9.296; 95% confidence interval [CI], 4.159-20.774; p<0.01) and male (OR, 3.447; 95% CI, 1.191-9.974; p=0.02). Conclusion: LTBI treatment compliance must be improved in NKR with a shorter regimen. In addition, a larger study regarding a focus on LTBI with easy access to related data for NKR should be conducted.

• Korean Journal of Materials Research
• /
• v.30 no.8
• /
• pp.406-412
• /
• 2020

SrMoO₄:RE³⁺ (RE=Dy, Sm, Tb, Eu, Dy/Sm) phosphors are prepared by co-precipitation method. The effects of the type and the molar ratio of activator ions on the structural, morphological, and optical properties of the phosphor particles are investigated. X-ray diffraction data reveal that all the phosphors have a tetragonal system with a main (112) diffraction peak. The emission spectra of the SrMoO₄ phosphors doped with several activator ions indicate different multicolor emissions: strong yellow-emitting light at 573 nm for Dy³⁺, red light at 643 nm for Sm³⁺, green light at 545 nm for Tb³⁺, and reddish orange light at 614 nm for Eu³⁺ activator ions. The Dy³⁺ singly-doped SrMoO₄ phosphor shows two dominant emission peaks at 479 and 573 nm corresponding to the ⁴F_9/2→⁶H_15/2 magnetic dipole transition and ⁴F_9/2→⁶H_13/2 electric dipole transition, respectively. For Dy³⁺ and Sm³⁺ doubly-doped SrMoO₄ phosphors, two kinds of emission peaks are observed. The two emission peaks at 479 and 573 nm are attributed to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions of Dy³⁺ and two emission bands centered at 599 and 643 nm are ascribed to ⁴G_5/2→⁶H_7/2 and ⁴G_5/2→⁶H_9/2 transitions of Sm³⁺. As the concentration of Sm³⁺ increases from 1 to 5 mol%, the intensities of the emission bands of Dy³⁺ gradually decrease; those of Sm³⁺ slowly increase and reach maxima at 5 mol% of Sm³⁺ ions, and then rapidly decrease with increasing molar ratio of Sm³⁺ ions due to the concentration quenching effect. Fluorescent security inks based on as-prepared phosphors are synthesized and designed to demonstrate an anti-counterfeiting application.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.292-292
• /
• 2016

Transition metal dichalcogenides (TMDs) with a two-dimensional layered structure have been considered highly promising materials for next-generation flexible, wearable, stretchable and transparent devices due to their unique physical, electrical and optical properties. Recent studies on TMD devices have focused on developing a suitable doping technique because precise control of the threshold voltage ($V_{TH}$) and the number of tightly-bound trions are required to achieve high performance electronic and optoelectronic devices, respectively. In particular, it is critical to develop an ultra-low level doping technique for the proper design and optimization of TMD-based devices because high level doping (about $10^{12}cm^{-2}$) causes TMD to act as a near-metallic layer. However, it is difficult to apply an ion implantation technique to TMD materials due to crystal damage that occurs during the implantation process. Although safe doping techniques have recently been developed, most of the previous TMD doping techniques presented very high doping levels of ${\sim}10^{12}cm^{-2}$. Recently, low-level n- and p-doping of TMD materials was achieved using cesium carbonate ($Cs_2CO_3$), octadecyltrichlorosilane (OTS), and M-DNA, but further studies are needed to reduce the doping level down to an intrinsic level. Here, we propose a novel DNA-based doping method on $MoS_2$ and $WSe_2$ films, which enables ultra-low n- and p-doping control and allows for proper adjustments in device performance. This is achieved by selecting and/or combining different types of divalent metal and trivalent lanthanide (Ln) ions on DNA nanostructures. The available n-doping range (${\Delta}n$) on the $MoS_2$ by Ln-DNA (DNA functionalized by trivalent Ln ions) is between $6{\times}10^9cm^{-2}$ and $2.6{\times}10^{10}cm^{-2}$, which is even lower than that provided by pristine DNA (${\sim}6.4{\times}10^{10}cm^{-2}$). The p-doping change (${\Delta}p$) on $WSe_2$ by Ln-DNA is adjusted between $-1.0{\times}10^{10}cm^{-2}$ and $-2.4{\times}10^{10}cm^{-2}$. In the case of Co-DNA (DNA functionalized by both divalent metal and trivalent Ln ions) doping where $Eu^{3+}$ or $Gd^{3+}$ ions were incorporated, a light p-doping phenomenon is observed on $MoS_2$ and $WSe_2$ (respectively, negative ${\Delta}n$ below $-9{\times}10^9cm^{-2}$ and positive ${\Delta}p$ above $1.4{\times}10^{10}cm^{-2}$) because the added $Cu^{2+}$ ions probably reduce the strength of negative charges in Ln-DNA. However, a light n-doping phenomenon (positive ${\Delta}n$ above $10^{10}cm^{-2}$ and negative ${\Delta}p$ below $-1.1{\times}10^{10}cm^{-2}$) occurs in the TMD devices doped by Co-DNA with $Tb^{3+}$ or $Er^{3+}$ ions. A significant (factor of ~5) increase in field-effect mobility is also observed on the $MoS_2$ and $WSe_2$ devices, which are, respectively, doped by $Tb^{3+}$-based Co-DNA (n-doping) and $Gd^{3+}$-based Co-DNA (p-doping), due to the reduction of effective electron and hole barrier heights after the doping. In terms of optoelectronic device performance (photoresponsivity and detectivity), the $Tb^{3+}$ or $Er^{3+}$-Co-DNA (n-doping) and the $Eu^{3+}$ or $Gd^{3+}$-Co-DNA (p-doping) improve the $MoS_2$ and $WSe_2$ photodetectors, respectively.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.594-602
• /
• 2011

The effect of ${\alpha}$-, ${\beta}$- and ${\gamma}$-picolines on the stereochemistry of the coordination compounds of lanthanide(III) nitrates derived from 4[N-(furfural)amino]antipyrine semicarbazone (FFAAPS) has been studied. The general composition of the present coordination compounds is [Ln(FFAAPS)$(NO_3)_3$Pic] (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy or Ho and Pic=${\alpha}$-, ${\beta}$- or ${\gamma}$-picolines). All these coordination compounds have been characterized by elemental analyses, molecular weight, molar conductance, magnetic susceptibility, infrared and electronic spectra. The infrared studies suggest that the FFAAPS behaves as a neutral tridentate ligand with N, N, O donor while ${\alpha}$-, ${\beta}$- or ${\gamma}$-picoline is coordinated to the lanthanide(III) ions via heterocyclic N-atom. Nitrates are bicovalently bonded in these compounds. From the electronic spectral data, nephelauxetic effect (${\beta}$), covalence factor ($b^{1/2}$), Sinha parameter (${\delta}%$) and the covalence angular overlap parameter (${\eta}$) have been calculated. Thermal stabilities of these complexes have been studied by thermogravimetric analysis. The coordination number of lanthanide(III) ions in the present compound is found to be ten. The antibacterial studies screening of the primary ligand FFAAPS and the complexes showed that the present complexes have moderate antibacterial activities.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.64-71
• /
• 2024

Purpose: The purpose of this study is to evaluate Ti-base abutment's three different heights and three different cement types on the pull-off force of zirconia-based restorations. Materials and Methods: A total of 90 fixture lab analogs were embedded in auto polymerizing resin bloack. 90 Ti-base abutments heights of 3 mm, 5 mm, 7 mm were scanned and zirconia restoration were prepared from scanned files. Zirconia restoration were cemented with three different types of cements (temporary, semi-permanent, permanent) following manufacturer's instructions. All 90 specimens were placed and tested in a universal testing machine for pull-out testing. Retention was measured by recording the force at load drop. Statistical analysis was performed using Kruskal-Wallis test for detecting whether there are any statistical significance along cement types or abutment heights. After that, Mann-Whitney test was used for figuring out differences regarding abutment height and the comparison between 3 cements. Results: Temp bond showed significantly lower pull-off force compared to Fujicem regardless of any abutment height. However, there were significant differences between Cem-implant and Fujicem in abutment height of 3 mm and 7 mm, but there was no significant difference in 5 mm. Temp bond and Cem-implant had significant differences only in abutment height of 5 mm. Conclusion: Although Ti-base abutment height did not influenced zirconia restorations' retentiveness, cement types showed significant differences.

• Journal of Biomedical Engineering Research
• /
• v.33 no.2
• /
• pp.78-88
• /
• 2012

Knee joint instability by anterior cruciate ligament(ACL) rupture is allowing the abnormal loading condition at the tibial epiphysis locally, resulting in producing locally different bone bruise. The study examined difference between local alteration patterns of trabecular bone microarchitecture at medial and lateral parts of the tibial epiphysis by ACL rupture. Fourteen SD rats were divided into Control(CON; n = 7) and Anterior Cruciate Ligament Transection(ACLT; n = 7) groups. The tibial joints were then scanned by in vivo ${\mu}$-CT at 0, 4, and 8 weeks post-surgery. The results showed that alteration pattern on trabecular bone microarchitecture at medial part was significantly higher than that at lateral part of the tibial epiphysis in ACLT group from 0 to 8 weeks(P < 0.05). Tb.Th and Tb.Sp distributions were well corresponded with differences between aforementioned trabecular bone microarchitectural alteration pattens at medial and lateral parts of the tibial epiphysis in ACLT group from 0 to 8 weeks(P < 0.05). These findings suggest that the alteration patterns of trabecular bone microarchitecture should be locally and periodically considered, particularly with respect to the prediction of bone fracture risk by ACL rupture. Improved understanding of the alteration patterns at medial and lateral trabecular bone microarchitectures at the tibial epiphysis may assist in developing more targeted treatment interventions for knee joint instability secondary to ACL rupture.

• Clinical and Experimental Reproductive Medicine
• /
• v.40 no.1
• /
• pp.23-28
• /
• 2013

Objective: The aim of the present study was to examine the relationship among male age, strict morphology, and sperm chromatin structure and condensation. Methods: Sperm samples from a total of 100 men underwent semen analysis, and sperm chromatin structure and condensation were assessed with toluidine blue (TB) and aniline blue (AB) tests. Results: Prevalence of strict morphology of less than 4%, and abnormal sperm chromatin structure and condensation did not show any statistically significant differences according to male age (p=0.605, p=0.235, and p=0.080). No significant correlation was demonstrated among age of male partners, strict morphology, and abnormal sperm chromatin structure using TB and AB tests. However, abnormal sperm chromatin condensation was positively associated with sperm chromatin structure (r=0.594, p=0.000) and showed negative correlation with strict morphology (r=-0.219, p=0.029). Conclusion: The tests for sperm chromatin condensation showed a significant association with strict morphology. Further study is needed to elucidate the relationship between clinical outcome and sperm chromatin tests.

• Journal of agricultural medicine and community health
• /
• v.32 no.3
• /
• pp.125-138
• /
• 2007

Objectives: This retrospective study is to identify related factors of treatment success of patients with tuberculosis at community health centers. Methods: The subjects of this study were 1,417 patients with tuberculosis treated in 28 community health centers. The predictors of tuberculosis treatment success were analyzed in terms of 2 areas, which were characteristics of patients and health centers(TB control program). The characteristics of patients consist of 2 factors, such as demographic & diagnosis and treatment. The present conditions of health centers consist of 3 factors, location of centers, resources, and community activities. Data were analysed using X2- test and logistic regression methods. Results: The significant differences between success group and failure group were sex(p=0.003), age(p=0.013), job(p=0.000), type of patients(p=0.001), past history(p=0.029), BCG injection(p=0.009), sputum culture examination(p=0.017), period of treatment(p=0.000), location of center(p=0.001), population per staff(p=0.015), FTE(p=0.027), education days of staff(p=0.005), BCG injection rate(p=0.001), case detection rate (p=0.003), and health education provision rate(p=0.044). Then these variables were analysed using logistic regression analysis. Significant positive factors of treatment success were occupation(95% CI:1.3-6.1), periods of treatment(95% CI:1.5-2.2), center in large city(95% CI:1.2-16.7), center in middle city(95% CI:2.1-24.3), job education related TB(95% CI:1.02-1.3), and BCG injection rate(95% CI:1.1-303.4). Significant negative factors of treatment success were male(95% CI:0.1-0.5) and treatment after default(95% CI:0.005-0.5). Conclusions: Tuberculosis is still one of serious diseases in Korea, because it causes highest mortality rate among OECD countries. This study may provide information to improve treatment effectiveness of tuberculosis at community health centers.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.2
• /
• pp.342-347
• /
• 2023

The purpose of this study was to determine the comparison of upper arm, trunk and core muscle activities according to different performance in high Plank exercise using weightless exercise equipment. Six males(age, 23.00±0.73 years; height, 172.95±2.05 cm; body mass, 66.83±2.75 kg; and BMI, 22.33±0.72 kg/m²) completed this study as the subjects. Four type's high Plank exercises using weightless exercise equipment were performed(high plank, HP; high plank with air walker, HPAW; high plank with surf board, HPSB; high plank with waist trainer, HPWT). For the EMG analysis, we measured the body muscle activities of right side on the deltoid(DT), triceps brachii(TB), latissimus dorsi(LD), and external oblique(EO). This research's results were as follows. DT, TB, LD, & EO muscle activities were greatest during HPSB(p=.000). Therefore, these results are expected to serve as basic data for high Plank exercise using weightless exercise equipment performance applications in effective exercise programs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.45-55
• /
• 2008

The objective of this research was to develop a VEPCD (ViscoElastoPlastic Continuum Damage) Model which is used to predict the behavior of asphalt concrete under various loading and temperature conditions. This paper presents the VEPCD model formulated in a tension mode and its validation using four hot mix asphalt (HMA) mixtures: dense-graded HMA, SBS, CR-TB, and Terpolymer. Modelling approaches consist of two components: the ViscoElastic Continuum Damage (VECD) mechanics and the ViscoPlastic (VP) theory. The VECD model was to describe the time-dependent behavior of HMA with growing damage. The irrecoverable (whether time-dependent or independent) strain has been described by the VP model. Based on the strain decomposition principle, these two models are integrated to form the VEPCD model. For validating the VEPCD model, two types of laboratory tests were performed: 1) a constant crosshead strain rate tension test, 2) a fatigue test with randomly selected load levels and frequencies.