• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.84-87
• /
• 2011

We fabricated phosphorescent organic light-emitting devices with a 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) host layer. Two kinds of devices, one of ITO/TAPC/TAPC:FIrpic/TAZ/LiF/Al (device A) and one of ITO/TAPC:FIrpic/TAPC/TAZ/LiF/Al (device B), were prepared to investigate electrical and optical properties. Iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$]picolinate (FIrpic) and 3-(4-biphenylyl)-4-phenyl-5-(4-tert-butylphenyl)-1,2,4-triazole (TAZ) were used as a blue phosphorescent guest material and an electron transport layer, respectively. The TAPC layer in device B strongly contributes to whitish emission, higher driving voltage, and lower current efficiency characteristics compared with device A. The mechanisms of these electrical and optical characteristics of the devices were investigated.

• 반도체디스플레이기술학회지
• /
• 제11권3호
• /
• pp.33-37
• /
• 2012

Simple and high efficiency blue organic light-emitting diodes with three organic layers of N, N'-diphenyl-N,N'-bis-[4-(phenyl-m-tolylamino)-phenyl]-biphenyl-4,4'-diamine[DNTPD]/1,1-bis-(di-4-polya-minophenyl)cyclohexane[TAPC]/electron transport material [ET-137] were fabricated and their electroluminescent characteristics were evaluated according to the TAPC thickness variation in a range of $50{\sim}300{\AA}$. Electroluminescence spectra of the devices with structure of DNTPD/TAPC/ET-137 showed all the same central emission wavelengths of 455 nm under an applied voltage of 7V, which were similar with that of the device with ET-137 only. On the other hand, the electroluminescence spectra of the device with structure of DNTPD/ET-137 without TAPC layer showed double emission peaks at the wavelengths of 455 nm and 561 nm under an applied voltage of 7V. In the devices with structure of DNTPD/TAPC/ET-137, single peak blue emission was not maintained in the device with $50{\AA}$-thick TAPC above 8V by the formation of exciplex. In the device with $300{\AA}$-thick TAPC, however, single peak blue emission was maintained until 10 V. According to the thickness increase of TAPC in the fabricated devices, the current density and luminance decreased, but the luminous efficiency and roll-off characteristics were improved.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.163-163
• /
• 2013

최근 들어서 유연 OLED (Organic Light-Emitting Diodes) 소자에 대한 연구가 증가하면서 전통적인 ITO 전극을 대체할 수 있는 전극물질 후보로 그래핀이 많은 주목을 받고 있다. 그 중에 CVD 방법으로 합성된 다층 그래핀(Few layer graphene, FLG)은 실제 상용화되는 소자에 응용이 될 가능성이 높아 많은 연구가 이 방향으로 진행되고 있다. 이 연구에서는 다층 그래핀과 유기물질 사이의 계면을 전자분광학 분석을 이용해 각 분자층 사이의 에너지 준위 변화에 대해 분석했다. 에너지 준위 정렬을 이용하면 각 분자층간의 정공주입 에너지장벽을 알 수 있는데 이 에너지 장벽은 소자의 효율에 직접적으로 연관되는 값이다. 정공 주입층 물질로는 TAPC 1,1- Bis[4-[N,N'-di(p-tolyl)amino]phenyl]cyclohexane (TAPC)를 사용했고, 다층 그래핀과 TAPC층 사이의 에너지 준위 정렬을 분석한 결과 다층 그래핀과 TAPC층 사이에는 ~1.4 eV의 에너지 장벽이 존재함을 확인했다. 하지만 OLED 소자로 활용하기 위해서는 이보다 더 낮은 에너지 장벽을 필요로 하기 때문에 두 물질 사이에 4,4'-bis(N-phenyl-1-naphthylamino)biphenyl (NPB), 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile (HAT-CN)을 삽입하여 에너지 장벽을 낮추기 위한 시도를 해 보았다. 그래핀과 TAPC 사이에 중간층으로 NPB를 사용했을 때의 에너지 장벽은 0.55 eV, HAT-CN을 사용했을 때는 0.4 eV로 TAPC만 사용했을 때보다 ~1 eV정도 에너지 장벽을 낮추는 효과를 보여줬다. 이 연구를 통해 다층 그래핀을 OLED 소자의 전극으로 활용할 수 있는 가능성을 볼 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제36권4호
• /
• pp.397-402
• /
• 2023

We have developed inverted green phosphorescent organic light emitting diodes (OLEDs) using 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) and bis(carbazole-9-yl)biphenyl (CBP) hole transport layers. The driving voltage, current efficiency, power efficiency, and emission characteristics of devices were investigated. While the driving voltage for the same current density was about 1~2 V lower in the devices with the TAPC layer, the maximum luminance was higher in the device with the CBP layer. The maximum current efficiency and power efficiency were 3.2 and 2.7 times higher in the device with the CBP layer, respectively. The higher efficiency in the CBP device resulted from the enhanced hole-electron balance although weak parasitic recombination takes place in the CBP hole transport layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.496-498
• /
• 2008

We have developed green phosphorescent organic light-emitting diodes (OLEDs) with high quantum efficiency. Wide-energy-gap material, 1,1-bis[(di-4-tolylamino) phenyl]cyclohexane (TAPC), with high triplet energy level was used as a hole transporting layer. Electrophosphorescent devices fabricated using TAPC as a hole-transporting layer and N,N'-dicarbazolyl-4,4'-biphenyl (CBP) doped with fac-tris(2-phenylpyridine) iridium [Ir(ppy)3] as the emitting layer showed the maximum external quantum efficiency ($\eta_{ext}$) of 19.8 %, which is much higher than the devices adopting 4,4'-bis[N-(1-naphthyl)-N-phenyl-amino]biphenyl (NPB) (${\eta}B_{ext}=14.6%$) as a hole transporting layer.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1592-1599
• /
• 2018

The present study deals with the effect of dual cathode buffer layer (CBL) on the performance of bilayer of 4,4'-cyclohexylidenebis[N,N-bis(4-methylphenyl)benzenamine] (TAPC) and fullerene (C70)-based organic solar cell (OSC) with low donor concentration. OSC devices with CBLs have been fabricated using thermal vapor deposition technique. We report the use of lithium fluoride (LiF) and molybdenum trioxide ($MoO_3$) as CBLs. The insertion of LiF between C70 and aluminium (Al) electrode enhances the power conversion efficiency (PCE) of device from 1.89% to 2.47% but quenching of photogenerated excitons is observed at interface of C70 and LiF layers. Incorporation of $MoO_3$ between LiF and Al electrode further enhances PCE of device to 3.51%. This has also improved the material quality and device properties, by preventing the formation of gap states and diminishing exciton quenching.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.187-192
• /
• 2013

노즐을 이용한 인쇄 기법은 주로 전자 소자의 봉지를 위한 접착제의 인쇄분야에 적용되어 왔다. 노즐 인쇄를 통한 기능성 물질의 필름 형성은 커다란 도전이 될 수 있다. 본 논문에서는 노즐을 이용한 유기 잉크의 인쇄 특성을 실험을 통하여 알아보았다. 본 연구의 노즐 인쇄 실험에서 패턴을 형성하기 위한 잉크는 유기 발광 물질인 TAPC를 사용하였다. 인쇄된 패턴 폭은 잉크 공급 유량의 증가와 기판의 온도의 상승에 따라 증가하였다. 또한 인쇄된 패턴은 건조 후 커피링 형상을 나타내었다.

• Clinical and Experimental Pediatrics
• /
• 제45권2호
• /
• pp.199-207
• /
• 2002

목 적 : 본 연구에서는 기능적 단심실의 치료로 심방-폐동맥 문합술 시행 후 나타난 합병증을 해결하기 위해 총 공정맥-폐동맥 문합술을 시행한 증례를 검토하여 그 필요성과 유용성에 대해 조사하였다. 방 법: 심방-폐동맥 문합술 후 생긴 합병증의 치료를 위해 총 공정맥-폐동맥 문합술로 전환한 환아 6명(남 : 녀=5 : 1)을 대상으로 수술 전, 후 임상 양상 및 혈역학적 검사 소견을 후향적으로 분석하였다. 기능적 단심실 환자에서 변형 폰탄 수술 후 총 공정맥-폐동맥 문합술로 전환까지의 시간은 112개월이었다. 결 과 : 심방-폐동맥 문합술 후 재수술의 적응증이 된 후기 합병증은 단백 소실성 장병증(3례), 폰탄순환 부전(2례) 및 우심방 세동(1례)이었으며, 심방 혈전증과 우심방 확장으로 인한 우폐정맥 수축이 각각 1례에서 병발하였다. 전례에서 임상 증상 및 혈역학적 소견이 호전되었지만 2례에서 단백소실성 장병증이 재발하여 heparin 투여 후 치료되었다. 총 공정맥-폐동맥 문합술전 우심방의 압력은 $18.0{\pm}3.6mmHg$이었으나, 수술 후 $14.4{\pm}3.7mmHg$로 감소하였으며, 폐동맥 형태의 퇴행은 관찰되지 않았다. 총 공정맥-폐동맥 문합술 전환 후 수술 사망률 및 중대한 합병증은 없었다. 결 론: 심방-폐동맥 문합술 후 후기 합병증의 완화를 위하여 총 공정맥-폐동맥 문합술로 전환한 증례들에서 혈역학적인 개선과 함께 예후가 호전됨을 관찰하였으며, 따라서 심방-폐동맥 문합술 후 후기 합병증이 유발된 경우 총 공정맥-폐동맥 문합술로의 전환을 적극적으로 검토할 필요가 있을 것으로 사료된다.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1627-1637
• /
• 2012

The coupling reaction between 5-bromo-3-phenylbenzo[c]isoxazole and diphenylamine followed by further condensation with a mono-, di- or ter-acetyl aromatic compound in the presence of diphenyl phosphate at $145^{\circ}C$ gave a novel asymmetric diarylquinolines, oligoquinolines with diphenylamine endgroups, and a first generation quinoline dendrimer in 41-82% isolated yield. The electrochemical and photophysical properties of the oligoquinolines were characterized by cyclic voltammograms (CVs) and spectroscopy. All the quinolines emit bright sky blue light due to charge transfer from quinoline group to diphenly amine with very high quantum efficiency (> 90%). Organic light-emitting diodes (OLEDs) were fabricated using these quinolines as emitting materials. Among different device architectures explored, OLEDs with a structure of ITO/PEDOT (40 nm)/TAPC (15 nm)/D-A quinoline (40 nm)/TPBI (30 nm)/LiF (1 nm)/Al using TAPC as an electron blocking layer and TPBI as a hole blocking layer gave the best performance. A high external quantum efficiency in the range of 1.2-2.3% were achieved in all the quinolines with the best performance in BBQA(5). Our results indicate diarylamino-substituted oligoquinoline and dendrimer are promising materials for OLEDs applications.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.15-19
• /
• 2009

A high efficient organic red light emitting device with structure of DNTPD/TAPC/$Bebq_2$ :[$(pq)_2Ir(acac)$, SFC-411]/SFC-137 was fabricated on the plastic substrate, which can be applied in the fields of flexible display and illumination. In the device structure, N,N'-diphenyl-N,N'-bis-[4-(phenyl-m-tolylamino)-phenyl]-biphenyl-4,4'-diamine[DNTPD] as a hole injection layer and 1,1-bis-(di-4-tolylaminophenyl) cyclohexane [TAPC] as a hole transport were used. Bis(10-hydroxybenzo[h]quinolinato) beryllium complex [$Bebq_2$] was used as a light emitting host material. The host material, $Bebq_2$ was doubly doped with volume ratio of 7% iridium(III)bis-(2-phenylquinoline)acetylacetonate[$(pq)_2$Ir(acac)] and 3% SFC-411[red phosphor dye coded by the proprietary company]. And then, SFC-137 was used as an electron transport layer. The luminous intensity and current efficiency of the fabricated device were $22,780\;cd/m^2$ at 9V and 17.3 cd/A under $10,000\;cd/m^2$, respectively. The maximum current efficiency of the device was 22.4cd/A under $580\;cd/m^2$.