• KNOM Review
• /
• v.21 no.2
• /
• pp.26-34
• /
• 2018

With the proliferation of cloud computing and services, the internet traffic and the demand for better quality of service are increasing. For this reason, server virtualization and network virtualization technology, which uses the resources of internal servers in the data center more efficiently, is receiving increased attention. However, the existing hardware Test Access Port (TAP) equipment is unfit for deployment in the virtual datapaths configured for server virtualization. Virtual TAP (vTAP), which is a software version of the hardware TAP, overcomes this problem by duplicating packets in a virtual switch. However, implementation of vTAP in a virtual switch has a performance problem because it shares the computing resources of the host machines with virtual switch and other VMs. We propose a vTAP implementation technique based on the extended Berkeley Packet Filter (eBPF), which is a high-speed packet processing technology, and compare its performance with that of the existing vTAP.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.216-224
• /
• 2020

This paper proposes an impedance design method of the test device for evaluating Low Voltage Ride Through(LVRT) and High Voltage Ride Through(HVRT) functions. The LVRT/HVRT test device should have ability to generate the fault voltage specified in the grid code for a certain period and to limit the magnitude of the fault current with the design specification. In this paper, the impedance design method for auto transformer is proposed based on a equivalent model of a tap-change auto-transformer during LVRT/HVRT operation. In addition, to generate various fault voltages required the LVRT/HVRT test, tap impedance design in the auto transformer is considered. To verify the validity of the proposed design method, the design process of the 10MVA LVRT/HVRT test device was conducted and the design results was verified through simulation models.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.1357-1360
• /
• 2003

인터넷과 네트워크 기술의 발달은 실생활에 많은 편리함을 주고 있지만 그에 따른 여러 가지 부작용들도 많이 나타나고 있다. 그 중 가장 심각한 문제는 보안 사고에 의한 피해인데, 최근에는 특정 장치를 해킹하여 자료를 망가뜨리는 것보다 불특정 다수에 의한 과다한 트래픽 생성 공격이 더 많아지고 있다. 특히 DoS/DDoS(Distributed Denial of Service)와 같은 공격은 공격자가 네트워크 전문지식을 가지고 있지 않아도 공격을 할 수 있고 원천적인 방어 방법이 없다는 점에서 심각성이 증대되고 있다. 본 논문에서는 네트워크 모니터링에 사용되는 TAP(Test Access Port)의 기반 기술을 이용하여 평시에는 TAP 의 본 기능을 수행하다 DoS/DDoS 공격과 같이 과다한 네트워크 트래픽 발생으로 장비가 멈추거나 망가지는 상황 등의 장애 발생시 내부 네트워크를 외부와 물리적으로 분리할 수 있는 지능형 TAP(S-TAP)에 대한 설계에 대해 설명하였다. 또한 S-TAP을 이용하여 기존 네트워크에 적용될 수 있는 환경을 제시하여 S-TAP의 유용성도 언급하였다.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.1-11
• /
• 2022

Avionics Full-DupleX Ethernet (AFDX) is a next-generation avionics network interface technology that is widely applied in the latest aircraft to replace ARINC429 and MIL-STD-1553B. However, the criteria for authenticating an avionics network consisting of AFDX are very scarce. Using AFDX Protocol Analyzer developed by the Korea Electronics Technology Research Institute and AFDX Tap developed by the Korea Aerospace University, we proposed a technology of certification practicality that can verify the normal functioning of avionics equipment with AFDX network interface. Our proposed technology provided the ability to collect precision packets, to verify AFDX specification compliance, and perform automatic tests to reduce the time and cost of authentication of AFDX avionics devices.

• The KIPS Transactions:PartA
• /
• v.17A no.4
• /
• pp.181-188
• /
• 2010

In this study, we suggest the system to analyze network users' action patterns by using Data-Mining Technique. We installed Network Tap to implement the analysis system of network action and copied the network packet. The copied packet is stored at the database through MainMemoryDB(MMDB) of the high-speed. The stored data analyze the users' action patterns by using Data-Mining Technique and then report the results to the network manager on real-time. Also, we applied the standard XML document exchange method to share the data between different systems. We propose this action pattern analysis system operated embedded type of SetToBox to install easily and support low price.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.389-395
• /
• 2013

As fusing IT and medical technique, the number of patients who adhere medical equipment inside of them is increasing. However there is a problem of for the third person to tap or modulate the patient's biometric data viciously. This paper suggests quantum encryption-based key distribution model to share key for the third person not to tap or modulate the patient's biometric data between patient and hospital staff. The proposed model uses one-time pad key that shares key sending random bits not direct sending message of quantum data. Also, it guarantees patient's anonymity because the biometric data of injected-device in the body doesn't be exposed unnecessarily.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.65-73
• /
• 2007

This paper introduces design-for-test (DFT) techniques for low-cost system-on-chip (SoC) test. We present a Scan-Test method that controls IEEE 1500 wrapper thorough IEEE 1149.1 SoC TAP (Test Access Port) and design an at-speed test clock generator for delay fault test. Test cost can be reduced by using small number of test interface pins and on-chip test clock generator because we can use low-price automated test equipments (ATE). Experimental results evaluate the efficiency of the proposed method and show that the delay fault test of different cores running at different clocks test can be simultaneously achieved.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.159-169
• /
• 2016

The current railway control system in Korea is comprised of signaling, electric rail power, communication, and maintenance systems that are independent of each other. Further, these systems have different mediums and protocols for transmitting the field equipment data to the central control system. The Safety Supervision System has as its purpose the collecting of safety-related data from each system to predict and prevent accidents, this system utilizes standard protocol. Safety-related data need to be collected from field data transmission devices of the existing control system, the data should be collected without affecting the communication of the existing system. In this study, sniffing skill, which is typically used for network traffic monitoring or security, is used to collect data. The problems arising from the use of sniffing devices are noted, and the Packet Conversion Node is proposed as a solution to the problems. Further, functional and performance testing were completed for the prototype, and the software architecture and packet conversion process were verified.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.10
• /
• pp.23-31
• /
• 2016

Grout is generally operated with low viscous material similar to water, but grout for micro crack with high viscous materials and high injection pressure is gradually increased under the development of underground and subsea space. In order to estimate grouting injection performance considering crack width, viscosity of grouting materials, and injection pressure, there should be a reliable standard laboratory testing method. In this paper, theoretical injection mechanisms of grouting materials are presented as radial and linear flows, and laboratory testing apparatus are introduced to simulate each flow case. Radial flow is simulated by using acrylic disk plates which are able to spread grouting material radially from the center of the disk plates, and linear flow is simulated by using stainless parallel plane plates which are able to spread grouting material linearly. Apparatus are consist of upper and lower plates and industrial films with different thickness are placed between plates in order to simulate various crack widths. Laboratory verification tests with these apparatus were conducted with tap water (1cP at $20^{\circ}C$) as an injection material. Through the laboratory testing results, the best laboratory testing method is recommended in order to estimate grouting injection performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.291-298
• /
• 2019

We describe the improvement of insulation performance and the prevention of electrolyte leakage in a single cell in order to prevent the fuming phenomenon caused by leakage of electrolyte in a lithium secondary battery in a submerged weapon (torpedo) operated in Korea. A torpedo using lithium secondary battery as a main power source (propulsion battery) can induce the heat and fuming phenomenon, which makes it inconvenient for naval equipment operation in Korea. In the simulation test, the electrolyte of some battery cells leaked in the battery pack unit, leading to a short circuit between the main power circuit and the terminal tab of the high voltage part. We analyzed the characteristics and mechanism of the lithium secondary battery during this heat generation and fuming phenomenon. In order to prevent leakage of the electrolyte in the lithium secondary battery, the design was improved via fundamental (terminal tap enhancement) and complementary (insulation block selection and installation) measures. Comparison of the performance test before and after the improvement showed that the tensile strength of the tap terminal was improved about 2 times and the withstand voltage characteristic was improved. The application of quality improvement measures resulted in no fuming even after more than 3 years of field operation. This result is expected to improve the operation and storage stability of the torpedo propulsion cell.