• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.129-138
• /
• 2003

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required in improve bearing lubrication. Three urea/ether oil greases with identical composition were synthesized to compare the performance of these greases according to the thickener content of grease. The typical grease physical properties were investigated. And life test of these greases was conducted by FE-9 grease life tester. The characteristics of the greases before and after life test were investigated using FT-IR, microscope, OIT and TAN meter. Large differences in the grease performance depending on the content of the thickener were observed. The grease with higher content of the hickener showed higher performance such as long life time and low TAN value. After preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT, then optimized two greases were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT data. Characteristics of the optimized two greases were on the same level with estimated value. The optimized grease by means of OIT value showed longer grease life in comparison with optimized grease by dropping point. However two greases showed higher performance than typical urea/ether oil.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1171-1187
• /
• 2012

A depth adjustment method for visual fatigue reduction for depth-image-based rendering (DIBR) system is proposed. One important aspect of the method is that no calibration parameters are needed for adjustment. By analyzing 3D image warping, the perceived depth is expressed as a function of three adjustable parameters: virtual view number, scale factor and depth value of zero parallax setting (ZPS) plane. Adjusting these three parameters according to the proposed parameter modification algorithm when performing 3D image warping can effectively change the perceived depth of stereo pairs generated in DIBR system. As the depth adjustment is performed in simple 3D image warping equations, the proposed method is facilitative for hardware implementation. Experimental results show that the proposed depth adjustment method provides an improvement in visual comfort of stereo pairs as well as generating comfortable stereoscopic images with different perceived depths that people desire.

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06b
• /
• pp.11-11
• /
• 1987

Among other poly(4,4'-terephthanilidealkylamide)s (PTAA's), poly (4,4'-terephthanilideadipamide) (PTAd) gave clear critical concentration curves. For PTAA's with methylene units more than 6, the critical concentration (C*) seemed to be beyond the solubility limit of H₂SO₄. Under shearing conditions, the nematic domains were easily oriented and stretched in the direction of shear , and a fibrillar structure resulted. At low frequencies, a monotollous reduction of loss tangent (tan) was observed as concentration increased. At high frequencies, however, tan was increased above C* again, and showed maximum at saturation concentration (Cs). With increasing temperature, viscosity of isotropic and anisotropic phases was normally decreased, while viscosity of biphases was increased. Plot of complex viscosity (If) against temperature based on rheological measurements exhibited a good correlation with phase diagram constructed by polarizing microscope observations. Rheological parameters suggested the optimum dope concentration of PTAd with inherent viscosity 2.02 at 30oc is in the vicinity of 19.2 wt%, which seemed to agree well with spinning experiments (around 19.4 wt%). In general, effects of spinning and annealing conditions on the mechanical properties of PTAA fibres were most pronounced in PTAd fibre spun from anisotropic spinning dope .

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.301-307
• /
• 2002

A multilayer ceramic chip antenna with helical structure is analyzed to enhance the narrow bandwidth of conventional ceramic chip antennas. The simulations are performed by HFSS to verify the effects of structural parameters on impedance bandwidth. The multilayer ceramic chip antennas consist of a rectangular-parallelepiped ceramic body$({\varepsilon}_r=7.8,\; tan\; {\delta}=0.0043)$ and helical conductor patterns are embedded in the ceramic body using LTCC-MLC technology. 3D structure design of the multilayer ceramic chip antenna suitable for IMT-2000 (1,920~2,170 MHz) handset has been implemented, and experimental results are presented and discussed.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.1
• /
• pp.80-86
• /
• 2014

Tannase (Tan410) from a soil metagenomic library was immobilized on different supports, including mesoporous silica SBA-15, chitosan, calcium alginate, and amberlite IRC 50. Entrapment in calcium alginate beads was comparatively found to be the best method and was further characterized. The optimum pH of the immobilized Tan410 was shifted toward neutrality compared with the free enzyme (from pH 6.4 to pH 7.0). The optimum temperature was determined to be $45^{\circ}C$ for the immobilized enzyme and $30^{\circ}C$ for the free enzyme, respectively. The immobilized enzyme had no loss of activity after 10 cycles, and retained more than 90% of its original activity after storage for 30 days. After immobilization, the enzyme activity was only slightly affected by $Hg^{2+}$, which completely inhibited the activity of the free enzyme. The immobilized tannase was used to remove 80% of tannins from a green tea infusion on the first treatment. The beads were used for six successive runs resulting in overall hydrolysis of 56% of the tannins.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.219-229
• /
• 2020

The study investigates the factors affecting the profitability of listed commercial banks in Vietnam. Survey data for this research were collected from 10 Vietnamese listed commercial banks for the period from 2008 to 2018. In the study, we have built a model of econometric regression with the dependent variable being listed commercial banks' profitability results measured through ROA. The research methods used include descriptive statistics, IV regression and OLS regression analysis, and the authors carried out the model verification with Stata 14 software. The results showed that operating efficiency, loans size, retail loans ratio, state ownership, inflation rate, and GDP growth are factors that have a positive impact on profitability On the other hand, variables such as capital size, credit risk, liquidity risk, bank size, and revenue diversification are statistically insignificant; hence, these variables are not statistically adequate to indicate the influence of those independent variables to banks' profitability. The findings of this study suggest that the quality of assets should be considered in the context that bad debt risks come from lending heavily to the real estate sector. Meeting Basel II's capital compliance requirements is relatively difficult for small listed commercial banks compared to bigger listed commercial banks in Vietnam.

• Preventive Nutrition and Food Science
• /
• v.13 no.3
• /
• pp.245-248
• /
• 2008

The effects of native sweet potato starch (NSPS) and sweet potato starch modified by acetylation (MSPS) on dynamic rheological properties of surimi sols were investigated by small-deformation oscillatory measurements. Dynamic frequency sweeps of surimi sols at $10^{\circ}C$ showed that the addition of NSPS and MSPS resulted in a reduction of storage modulus (G') and loss modulus (G"). The tan $\delta$ values (ratio of G"/ G') of all samples were in the range of $0.15{\sim}0.54$ over a wide range of frequency, indicating that all surimi sols are more elastic than viscous. The characteristic G' thermograms of surimi sols during heating from 10 to $90^{\circ}C$ were influenced by the addition of starch. The tan $\delta$ values of all samples were maintained nearly constant above $45^{\circ}C$, showing that the G' is proportional to the G" irrespective of starch effects.

• Korean Journal of Social Welfare
• /
• v.44
• /
• pp.318-345
• /
• 2001

The purpose of this research was to develop and evaluate a preventive mental health program for the depression among the elderly in community. Based on the review of literature, intervention program for preventing depression among the elderly was developed. In particular, the program focuses on enhancing the sense of control which is from social cognitive theory. The preventive mental health program consists of two parts: Tan-Hak and Social intervention program. Tan-Hak was oriented to cognitive change and activities, while social intervention program dealt with some social skills for relationship, stress management, motivation of social activities (volunteer activities), positive future designing, etc. For the evaluation of this program, we employed depression scale and medical measurement such as hormone test before and after the program, and in-depth interview of subjects. Overall, this program was successful in some points. First, through the pre and post test, this program has positive effect on strengthening the sense of control, and consequently, lowering depression level. Secondly, 18 people started this program called "smile class" at first time, and none of them turned out until the end of the program. This implies that the program was interesting to the elderly.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.76-81
• /
• 2008

UV curable pressure sensitive adhesive (PSA) was made by blending the di-functional or hexa-functional urethane-acrylate oligomer with synthesized acrylic PSA. The change of adhesive property and removability were investigated at various oligomer contents under each oligomer. As the content of oligomer increased, the peel strength was increased before UV irradiation, but it was decreased after UV irradiation. Also, it was observed that the peel strength increased with decrease of storage modulus (G'), and that loss factor (tan ${\delta}$) of the adhesive material affected the adhesive properties and removability.

• Steel and Composite Structures
• /
• v.34 no.1
• /
• pp.155-170
• /
• 2020

Different parameters potentially affect the properties of corroded reinforced concrete beams. However, the high number of these parameters and their dependence cause that the effectiveness of the parameters could not be simply identified. In this study, an adaptive neuro-fuzzy inference system (ANFIS) was employed to determine the most influencing parameters on the properties of the corrosion-damaged reinforced concrete beams. 207 ANFIS models were developed to analyze the collected data from 107 reinforced concrete (RC) beams. The impact of 23 input parameters on nine output factors was investigated. The results of the paper showed the order of influence of each input parameter on the outputs and revealed that the input parameters regarding the uncorroded properties of concrete beams are the most influencing factors on the corresponding corroded properties of the beams.