• Structural Engineering and Mechanics
• /
• v.53 no.2
• /
• pp.311-324
• /
• 2015

The purpose of this study was to investigate experimentally the fatigue performance of reinforced concrete (RC) beams with hot-rolled ribbed fine-grained steel bars of yielding strength 500MPa (HRBF500). Three rectangular and three T-section RC beams with HRBF500 bars were constructed and tested under static and constant-amplitude cyclic loading. Prior to the application of repeated loading, all beams were initially cracked under static loading. The major test variables were the steel ratio, cross-sectional shape and stress range. The stress evolution of HRBF500 bars, the information about crack growth and the deflection developments of test beams were presented and analyzed. Rapid increases in deflections and tension steel stress occured in the early stages of fatigue loading, and were followed by a relatively stable period. Test results indicate that, the concrete beams reinforced with appropriate amount of HRBF500 bars can survive 2.5 million cycles of constant-amplitude cyclic loading with no apparent signs of damage, on condition that the initial extreme tensile stress in HRBF500 steel bars was controlled less than 150 MPa. It was also found that, the initial extreme tension steel stress, stress range, and steel ratio were the main factors that affected the fatigue properties of RC beams with HRBF500 bars, whose effects on fatigue properties were fully discussed in this paper, while the cross-sectional shape had no significant influence in fatigue properties. The results provide important guidance for the fatigue design of concrete beams reinforced with HRBF500 steel bars.

• Information and Communications Magazine
• /
• v.32 no.12
• /
• pp.45-50
• /
• 2015

최근 다양한 산업 군에서 ICT 융합 서비스가 활발히 개발되고 있고 사물인터넷(IoT: Internet of Things) 기술이 신성장 동력의 핵심 기술로 주목받고 있다. IoT는 기존에 연결을 고려하지 않았던 생활 속 모든 것들을(daily life objects) 상호 연결시켜주는 기술이다. 가트너는 현재 1% 미만의 사물만이 인터넷에 연결된 상황으로 보고하고 있고 Cisco의 자료에 따르면 2020년에는 연결된 장치 수가 500억 개 이상으로 증가할 것으로 예측하고 있다. 많은 장치가 연결되는 IoT 환경에는 많은 취약점과 보안 위협이 존재할 것이므로 보안과 개인정보 보호 기술은 반드시 제공되어야 하는 핵심기술이다. 본고에서는 IoT 기반 융합 서비스에서 발생했던 침해 사례를 살펴보고, 안전한 서비스 개발을 위한 기본적인 보안 요구사항을 제시한다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.3
• /
• pp.287-293
• /
• 2015

The current study has investigated the effects of biodiesel blended with gasoline on the spray characteristics in a Constant Volume Combustion Chamber (CVCC). With the concentration of 5, 10, 15 and 20% by volume, biodiesel was blended with commercial gasoline and performed on the macroscopic visualization test. Pure gasoline and biodiesel were also tested as the reference. The shadowgraph technique was conducted in the constant volume chamber. The spray images were recorded by a high speed video camera with frame speed 10,000 frame per second. Fuel injection was set at 800, 1000 and 1,350 bar with the simulated speed 1,500 and 2,000 rpm. The back pressure was controlled at 20 bar. The spray angle and penetration tip were measured and analyzed by using the image processing. At the high injection pressure, the spray penetration length with the simulated speed 1,500 rpm showed that B100 was lower than GB00-20 whereas the spray penetration length with the simulated speed 2,000 rpm exhibited that GB blends and B100 were insignificantly different. Due to biodiesel concentration, its effects on spray angles were observed throughout injection periods (T1, T2 and T3). At the simulated speed 1,500 rpm, the spray angle of GB blends and B100 presented the same pattern following injection timing. In addition, when the simulated speed increased to 2,000 rpm the different spray angle of all blends disappeared at main injection (T3).

• Atmosphere
• /
• v.20 no.3
• /
• pp.229-238
• /
• 2010

The 1,000~500 hPa thickness and the $0^{\circ}C$ isotherm at 850 hPa have been used as the traditional predictors for wintertime precipitation-type forecasts. New approaches are taking on added significance as preexistence method of determination for wintertime precipitation-type exhibits more or less prevalent false alarms. Moreover thicknesses and thermodynamic profiles from ordinary upper-air observation were not adequate to monitor the atmospheric structure. In this regard, Microwave radiometric profiler microwave radiometer is useful in wintertime precipitation-type forecasts because radiometric measurements provide soundings at high temporal resolution. In this study, the determination and the predictability of wintertime precipitation-type were examined by using the calculated thicknesses, temperature of 850 hPa (T850) from a microwave radiometer, and surface observation at National Center for Intensive Observation of severe weather (NCIO) located at Haenam, Korea. The critical values for traditional predictors (thickness of 1000~500 hPa and T850) were evaluated and adjusted to Haenam region because snow rarely occurred with a 1000-500 hPa thickness > 5,300 m and T850 > $-10^{\circ}C$. Three thicknesses (e.g., 1,000~850, 1000~700, and 850~700 hPa thickness), T850, surface air temperature, and wet-bulb temperature were also evaluated as the additional predictors. A simple nomogram and a flow chart were finally designed to determine the wintertime precipitation-type using the microwave radiometer. The skill scores for the predictability of precipitation-type determination are considerably improved and the predictors showed the temporal variations in 12 hours before precipitation. We can monitor the hit and run snowfall in winter successful by realtime watch of the predictors, especially in commutes of big cities.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.61-65
• /
• 1990

Comparison of induction times among the Rancimat Method, the Oven Test and the Weight Method were investigated, and the oxidation stability of perilla oil was determinated by the Rancimat Method. The induction times determinated by three methods using perilla oil show a good correlation. And the temperature dependence of the induction times of perilla oil was as follows. $t_p=e^{-0.0815T+9.183}$. The antioxidant effect of Tocopherols on the oxidation of perilla oil was not observed, and the antioxidant effect of the organic acids was increased in the order of Ascorbic acid>Ascorbyl stearate>Malic acid>Tartaric acid>Citric acid. The synergistic effect of Ascorbic acid (500 ppm)and Tocopherols was not observed below 200ppm of Tocopherols, but became larger with increasing Tocopherols level over 200ppm.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.4
• /
• pp.311-317
• /
• 2004

A bioequivalence study of $Gomcillin^{TM}$ capsules (DAEWOONG Pharmaceutical Co., Korea) to $Famoxin^{TM}$ capsules (Dong Wha Pharm. Ind. Co., Korea) was conducted according to the guideline of Korea Food and Drug Administration (KFDA). Twenty four healthy male Korean volunteers received each medicine at the amoxicillin dose of 500 mg in a $2{\times}2$ crossover study. There was a one-week wash out period between the doses. Plasma concentrations of amoxicillin were monitored by a high-performance liquid chromatography for over a period of 8 hours after the administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 8 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for $Gomcillin^{TM}/Famoxin^{TM}$ were $log0.91\;{\sim}\;log1.03$ and $;log0.93\;{\sim}\;log1.10$, respectively. These values were within the acceptable bioequivalence intervals of $log0.80\;{\sim}\;log1.25$. Thus, our study demonstrated the bioequivalence of $Gomcillin^{TM}$ and $Famoxin^{TM}$ with respect to the rate and extent of absorption.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.3
• /
• pp.209-218
• /
• 2007

This experiment was conducted to investigate effect of plowing frequency and sowing dates on the agronomic characteristics, feed value, weed yield and palatability of silage corn. Treatments were a basal treatment(C: May 5 seeding, plowing once, weeding control once), T1(May 12 seeding, plowing twice, weeding control 0 time), T2(May 19 seeding, plowing three times, weeding control 0 time, T3(May 26 seeding, plowing four times, weeding control 0 time) and T4(June 2 seeding, plowing five times, weeding control 0 time). The experiment was performed at the College of Life and Natural Sciences of Sangju University in Sangju in 2006. The plant height and ear height showed highly in order to C > T1 > T2 > T3 > T4 treatment, leaf length was the highest at T2 (96.0cm). Leaf width and number of dead leaf were the highest at C and T3 (11.2cm), C, C and T1 (4.6), respectively. Stem diameter was the highest at T3 as 31mm, while T2 was the lowest as 25mm (p<0.05). Ear circle showed highly in order of C > T1 > T4 > T3 > T4 (p<0.05), and tip filling degree was the highest at C treatment as 8.8, while T4 treatment was the lowest as 6.0 (p<0.05). The stem hardness and grain hardness were C < T1 < T2 < T3 < T4 (p<0.05). Stem saccharinity was T1(6.1%) was the highest, while T2(3.0%) was the lowest(P<0.05). Fresh yield of weed was the lowest at C treatment as 500 kg/ha, but T1 treatment was the highest as 44,100 kg/ha (p<0.05). Weed coverage rate showed highly in order of T1 > T2 > T3 > T4 > C treatment (p<0.05). Fresh yield of corn was the highest at C treatment as T3,550 kg/ha, but T4 treatment was the lowest as 65,500 kg/ha (p<0.05). Dry matter yield of corn showed highly in order of C(26,978 kg/ha) > T1(26,130 kg/ha) > T2(20,255 kg/ha) > T3(20,255 kg/ha) > T4(17,508 kg/ha) treatment (p<0.05). Crude protein content was T1(7.69%) > T4(7.42%) > T2(6.34%) > T3(5.99%) > C(5.91%) treatment (p<0.05), and Crude fat content showed highly in order of C (2.13%) > T1(2.04%) > T2(1.96%) > T3(1.95%) > T4(1.84%) treatment. Relative palatability of Holstein, Korean native goat and spotted deer was the highest at C treatment, but Korean native cattle was the highest at T1 treatment.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.2
• /
• pp.134-141
• /
• 2000

For electrochemical treatment of industrial wastewater, the effects of voltage, distance between electrodes, initial pH and NaCl concentrations on removal of pollutants were investigated in a batch electrolysis system. Temperature and pH in electrochemical reactor increased with increase in supplied voltage, but no significant change in EC was found. Removal of COD, turbidity, T-N and T-P were also enhanced with increase in the voltage. On the conditions of short distances between electrodes and long electrochemical reaction times, it was found that COD and T-N were very effectively removed in the system. Regardless of the distances, more than 80% of turbidity and T-P were removed at the beginning of reaction. When initial pH of the wastewater was about 7, the highest efficiency of COD removal was found in the system. On the other hand, removal efficiency of turbidity was unlikely affected by initial pH of the wastewater. T-N removal was increased with increase in initial pH. T-P was successfully removed in the pH range of 5 to 9 with varying removal efficiency of 79 to 96% after 2 minutes of electrochemical reaction time. Addition of NaCl into the electrochemical reactor increased removal efficiency of electrochemical treatment. The highest removal efficiency of COD and T-P, turbidity and T-N was obtained at NaCl concentrations of 500mg/L, 1,000 mg/L and 500mg/L, respectively.

• Biomolecules & Therapeutics
• /
• v.16 no.2
• /
• pp.168-172
• /
• 2008

The present study is to determine of sensitive nicorandil analysis method using HPLC and measure the pharmacokinetics parameters (bioavailability, $C_{max}$, $T_{max}$, Ke, $T_{1/2}$) of nicorandil (5 mg, Tab; Choongwae Pharma Corporation). Plasma (500 ul) was mixed with furosemide (internal standard, 500 ug/ml). Detection wavelength was 256 nm. The mixture of 0.01 M ammonium acetate and acetonitrile 80:20 (v/v) was used mobile phase. The HPLC separation was accomplished on ODC reverse HPLC column. The nicorandil was analyzed by a HPLC system, which consists of CAPCELL PAK C18 column (5 ${\mu}$m, 4.6 × 150 mm) and a chromatography data analysis S/W, using a isocratic mobile phase (mixture of 0.01 M ammonium acetate and acetonitrile 80:20 ) at 1.0 ml/min. Its sensitivity, selectivity, accuracy and precision must be adequate for the bioavailabilty study of nicorandil, and the linearity ($r^2$ ≥ 0.9994) of nicorandil was also proved in the range of 0.05 ug/ml . 3 ug/ml. The pharmacokinetic parameters of nicorandil (5 mg) tablets were measured as the follow. AUC: 0.19 ug/ml·hr, $C_{max}$: 0.14 ug/ml, $t_{max}$: 0.58 hr, Ke: 0.11 hr., $t_{1/2\beta}$: 6.76 hrs. This method is simple and sensitive HPLC method using UV detector for determination of nicorandil in human plasma.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.212-217
• /
• 2007

Fucoidan (fucan sulfate) is a fucose-containing sulfated polysaccharide from brown algae such as Fucus vesiculosus, Ecklonia kurome, and Cladosiphon okamuranus. The aim of this study was to investigate the effect of fucoidan on the expression of diabetes-related genes in mouse cell line 3T3-L1. 3T3-L1 adipocytes were cultured for 48 hr with or without fucoidan (10, 100, and 500 ppm) on a 60 mm dish. Reverse transcription polymerase chain reaction (RT-PCR) was used for measurement of peroxisome proliferators activated receptor ${\gamma}\;(PPAR{\gamma})$, CCAAT/enhancer binding protein ${\alpha}\;(C/EBP{\gamma})$, and glucose transporter 4 (GLUT4) RT-PCR analysis revealed that expression level of GLUT4, $PPAR{\gamma}$, and $C/EBP{\alpha}$ mRNAs increased with fucoidan treatment from 10 to 500 ppm in a dose-dependent manner. Fucoidan appears to enhance insulin sensitivity by increasing the expression level of diabetes-related genes in 3T3-L1 adipocytes. Therefore, fucoidan is potentially useful as a natural therapeutic material for hyperglycemia in type II diabetes patients.