Because of the increasing evidence of potential benefits of conjugated linoleic acid (CLA) on human health, there is a need to investigate its status in commercial dairies and develop feeding strategies to enhance the content and supply of CLA in milk and milk products. A two-year experiment was conducted to study the status of milk fat c-9, t-11 CLA on four selected commercial dairy farms in Utah (two) and Idaho (two), USA. Farms A and C grazed cows on pasture and supplemented with 7.0 kg/cow per day of their respective grain mixes during summer, while conserved forage and grain mix was fed during winter. Farm B fed a total mixed diet all year, with 10% of diet dry matter as fresh cut pasture during summer. Farm D had 1/3 of its cows grazed on pasture and supplemented with a total mixed diet during summer, while the rest were fed a total mixed diet. All cows in Farm D were fed a total mixed diet during winter. Farms A, B, C, and D had on average 80, 400, 150, and 500 milking cows, respectively, with Holstein or its crosses as the major breed. On a year-round basis, Farms A and C produced milk with 60% or more milk fat c-9, t-11 CLA and transvaccenic acid (TVA) contents than Farm B. Similarly, Farm D produced 30% or more c-9, t-11 CLA and TVA in milk than Farm B. Milk fat content of CLA and TVA was 150-200% more during summer compared with winter. Individual cows varied from 0.16 to 2.22% in milk fat c-9, t-11 CLA contents and 89% of the cows had c-9, t-11 CLA contents between 0.3 and 1.0% of milk fat. Individual cow variation was larger on Farms A and C compared with Farm D, with least variation on Farm B. Variation was larger in summer than in winter. The bulk tank milk c-9, t-11 CLA content varied from 0.27 to 1.35% of milk fat. Cows on Farms A and C produced similar or higher amounts of milk fat c-9, t-11 CLA on a daily basis even though their milk yield was lowest among the dairies. Concentration and supplies of c-9, t-11 CLA and TVA were highest from June through September and lowest from February through April, which should be the months for targeting improvement in the content and supply of milk fat c-9, t-11 CLA and TVA.
Background: While the perinatal outcomes of active maternal smoking are well documented, results of the effects of environmental tobacco smoke (ETS) exposure during pregnancy are inconsistent. We aimed to examine the effect of ETS exposure, assessed by maternal hair nicotine levels at $35^{th}$ week of gestation, on birth weight and the risk of small for gestational age (SGA) and low birth weight (LBW). Materials and Methods: A total of 871 non-smoking healthy pregnant women were recruited by one Korean hospital between 1 October 2006 and 31 July 2007. Hair samples were collected and anthropometric questionnaires administered at $35^{th}$ week of gestation. The primary outcome was birth weight and secondary outcomes were the risk of babies being SGA and LBW. Results: Log-transformed hair nicotine concentrations were inversely related with birth weight after adjusting for confounding variables (${\beta}=-0.077$, p=0.037). After stratifying hair nicotine levels by tertiles (T1, low [0.0-0.28 ng/mg]; T2, medium [0.29-0.62 ng/mg]; and T3, high [0.63-5.99 ng/mg]), the mean birth weight in each groups were 3,342g (T1) 3,296g (T2) and 3,290 g (T3), respectively. However the difference between groups was not statistically significant by analysis of co-variance (ANCOVA) adjusting for covariates (p=0.062). In logistic regression analysis, the risk of SGA was higher in the T3 (OR=1.59, 95%CI 1.05-2.42) than in the reference group (T1), after controlling for confounding variables. The risk of low birth weight (<2,500g, LBW) was not significantly higher (OR=1.44, 95%CI 0.95-2.19), but the risk of babies being below 3,000g birth weight was increased in the T3 group (OR=1.53, 95%CI 1.00-2.36) compared with that in the T1 group. Conclusions: Maternal ETS exposure during pregnancy was inversely related with birth weight. The risk of SGA increased in the highest ETS exposure group compared with in the low exposure group. To prevent ETS exposure during pregnancy, more comprehensive tobacco control policies are needed.
The insulin-like growth factors (IGFs), their receptors, and their binding proteins play key roles in regulating cell proliferation and apoptosis. Insulin-like growth factor binding protein-3 (IGFBP3, OMIM #146732) is one of the proteins that bind to the IGFs. IGFBP3 is a modulator of IGF bioactivity, and direct growth inhibitor in the extravascular tissue compartment. We identified twenty-two novel single nucleotide polymorphisms (SNPs) in IGFBP3 gene in Korean cattle (Hanwoo, Bos taurus coreanae) by direct sequencing of full gene including -1,500 bp promoter region. Among the identified SNPs, five common SNPs were screened in 650 Korean cattle; one SNP in promoter (IGFBP3 G-854C), one in 5'UTR region (IGFBP3 G-100A), two in intron 1 (IGFBP3 G+421T, IGFBP3 T+1636A), and one in intron 2 (IGFBP3 C+3863A). The frequencies of each SNP were 0.357 (IGFBP3 G-854C), 0.472 (IGFBP3 G-100A), 0.418 (IGFBP3 G+421T), 0.363 (IGFBP3 T+1636A) and 0.226 (IGFBP3 C+3863A), respectively. Haplotypes and their frequencies were estimated by EM algorithm. Six haplotypes were constructed with five SNPs and linkage disequilibrium coefficients (|D'|) between SNP pairs were also calculated. The information on SNPs and haplotypes in IGFBP3 gene could be useful for genetic studies of this gene.
The effects of pre-heat treatment(Q/T) on microstructure and hardness of SCM435 structural steel nitrided by micro-pulse plasma was investigated. The quenching and tempering temperatures for obtaining matrix hardness of SCM435 steel on range of HRC30 to HRC40 desired for machine parts were about $860^{\circ}C$ and $500^{\circ}C$ respectively. The case depth of SCM435 nitrided at $480^{\circ}C$ for 5 hours was independent of pre-heat treatment condition and was approximately $150{\mu}m$. However, hardness and compactness of nitrified layer on Q/T treated specimen were more heigher than annealed specimen. The case depth increased linearly with the increase of nitriding temperature, however, the hardness of nitrified layer decreased with the temperature. Phase mixture of ${\gamma}^{\prime}$-phase($Fe_4N$) and ${\varepsilon}$-phase($Fe_3N$) were detected by XRD analysis in the nitrified layer formed at optimum nitriding condition, and only single ${\gamma}^{\prime}$-phase was detected in the nitrified layer formed at higher nitriding temperature such as $540^{\circ}C$. The optimum nitriding temperature was approximately $480^{\circ}C$ which is lower than tempering temperature for preventing softening behavior of SCM435 matrix during nitriding process and the surface hardness of nitrified layer obtained by optimum preheat treatment condition was about Hv930.
Objective: This study was designed to investigate the correlation between gastric emptying measurement by ultrasonography and the findings of various questionnaires of functional dyspepsia (FD) or in Korean medicine to explore the possibility of quantification of questionnaires. Methods: Eighty-eight patients (44 patients with FD and 44 healthy controls) were recruited from October 2016 to November 2017. Gastric emptying half-time (T1/2) was measured by ultrasonography at fasting, and at 0, 15, 30, 45, 60, 90, and 120 min after meals (apple juice, 500 ml, 224 kcal). The average half-time (average T1/2) was calculated by averaging all measured half-times. A visual analogue scale (VAS), food retention questionnaire (FRQ), damum questionnaire (DQ), cold and heat questionnaire (CHQ), deficiency and excess questionnaire (DEQ), spleen-qi deficiency questionnaire (SQDQ), Nepean dyspepsia index-Korean version (NDI-K), and quality of life of NDI (NDI-QoL) were filled out by all participants. Correlation between the average T1/2 and questionnaires were analyzed for 79 patients (37 patients with FD and 42 healthy controls) after excluding missing and erroneous data. Results: The FRQ, DEQ, SQDQ, NDI-K, and NDI-QoL scores, especially for some gastrointestinal symptoms and general weakness-related symptoms, showed statistically significant correlations with average T1/2. Conclusions: Our results suggest that gastric emptying measurement by ultrasonography may be a quantitative substitute method for some Korean medical questionnaires or for some dyspepsia-related and deficiency-related items among them. However, further studies using various measurements of gastric emptying will be needed.
Ursolic acid, triterpenoid compound has been shown to stimulate osteoblast differentiation and enhance bone formation. In the present study, we examined the effects of similar triterpenoid compounds, oleanolic acid (OA) and its derivatives, such as oleanolic acid acetate (OAA) and oleanolic acetate methyl ester (OAM) on the bone formation in MC3T3-E1 osteoblast cells. We determined cellular proliferation, alkaline phosphatase (ALP) activity, mineralization, and expression of osteoblast specific genes and mitogen activated protein kinase phosphorylation. Treatment of $0.1-10{\mu}m$ OA, OAA, and OAM increased cellular proliferation, but not significantly increased as compared with dimethyl sulfoxide (DMSO). OA, OAA, and OAM at 5uM concentration enhanced ALP expression, mineralization, and osteocalcin (OCN) mRNA level. In conclusion, OA and its derivatives stimulated the osteoblast differentiation by increasing ALP, mineralization, and OCN mRNA expression. However, there were no significantly difference on osteoblast differentiation among treatment of OA, OAA, and OAM.
This work focuses on the electrical conduction mechanism in a lead free ($Na_{0.5}K_{0.5}NbO_3$ ; NKN) ceramics system with $LiNbO_3$ content of approximately critical concentration $x{\geq}0.2$. Lead free $(1-x)(Na_{0.5}K_{0.5})NbO_3-x(LiNbO_3)$, $NKN-LN_x$ (x = 0.1, 0.2) ceramics were synthesized by solid-state reaction method. Crystal structures are confirmed by X-ray diffraction. The electric-mechanical bond coefficient $k_p$ decreases and the phase transition temperature $T_c$ increases with increasing x content, as determined by dielectric and piezoelectric measurements. The value of the real dielectric constants ${\varepsilon}^{\prime}$ and $k_BT{\varepsilon}^{\prime\prime}$ showed anomalies around $T_c$ ($462^{\circ}C$ in the NKN-LN0.1 and $500^{\circ}C$ in the NKN-LN0.2). For the ionic conduction of mobile ions, the activation energies are obtained as $E_I=1.76eV$ (NKN-LN0.1) and $E_I=1.55eV$ (NKN-LN0.2), above $T_c$, and $E_{II}=0.78$ (NKNL-N0.1) and $E_{II}=0.81$ (NKN-LN0.2) below $T_c$. It is believed that the conduction mechanisms of NKN-LNx ceramics are related to ionic hopping conduction, which may arise mainly due to the jumping of $Li^+$ ions.
The crack length measurements by electrical potential(EP) method for 1% Cr-Mo-V and 12%Cr steel of 0.5T-CT specimen were performed at $500^{\circ}C, 600^{\circ}C 700^{\circ}C$, and an applicability of stress intensity factor($K_I$), net section stress($\sigma_{net}$), $C^*$-ingegral and $C_t$ parameter was studied to measure creep crack growth rate(da/dt) with side groove and without side groove under static and cyclic loading condition. The experimental result could be summarized as follows: 1) Crack measurement by EP method was available and coincided with the Johnson,s analytical equation. 2) da/dt by $K_I$ and $\sigma_{net}$ was not adequate because of the wide scatter band according to load and temperature, but $C^*$-integral, except for transition region, was adequate. 3) $C_t$ parameter showed the best fitted line through total creep region without relating with both temperature and load condition. 4) Under the cyclic loading condition, $C_t$ parameter was proper to extimate da/dt. And it was shown that da/dt for 1% Cr-Mo V steel under the static condition(R=1) was 1.16 times faster than the case under cyclic loading(R=0), and for 12% Cr steel, 1.43 times.
The crack length measurements by electrical potential(EP) method for 1% Cr-Mo-V and 12%Cr steel of 0.5T-CT specimen were performed at $500^{\circ}C, 600^{\circ}C 700^{\circ}C$, and an applicability of stress intensity factor($K_I$), net section stress($\sigma_{net}$), $C^*$-ingegral and $C_t$ parameter was studied to measure creep crack growth rate(da/dt) with side groove and without side groove under static and cyclic loading condition. The experimental result could be summarized as follows: 1) Crack measurement by EP method was available and coincided with the Johnson, s analytical equation. 2) da/dt by $K_I$ and $\sigma_{net}$ was not adequate because of the wide scatter band according to load and temperature, but $C^*$-integral, except for transition region, was adequate. 3) $C_t$ parameter showed the best fitted line through total creep region without relating with both temperature and load condition. 4) Under the cyclic loading condition, $C_t$ parameter was proper to extimate da/dt. And it was shown that da/dt for 1% Cr-Mo V steel under the static condition(R=1) was 1.16 times faster than the case under cyclic loading(R=0), and for 12% Cr steel, 1.43 times.
Load shedding is a last measure to avoid nationwide cascading collapses of power system by removing the pre-determined amount of loads from the main grid. In Korea, SPS(Special Protection System) is prepared to keep the power system stability from the extreme contingency of the critical transmission line losses. Among them, we need to pay attention to 765kV T/L’s because they have great influence on the total system stability. According to the present SPS operating guide, the total loads of 1,500MW should be removed through 2 step under-voltage load shedding(UVLS) scheme in case of 765kV T/L’s contingencies. However, it is not clear to defined how to determine the typical load reduction amounts for each case. This paper proposes a method to estimate appropriate amounts of load shed for 765kV T/L’s contingencies by analyzing the relevant national and international standards.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.