• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.26 no.2
• /
• pp.133-145
• /
• 1996

Aspirating or swallowing foreign bodies is a common occurrence. If they are wholly or partly radiopaque, their localization in and progress through the gastrointestinal tract can be more effective. Of the dental origin foreign materials swallowed, the most common things are fragments of anterior maxillary partial denture. But the radiopacity of denture base resins is not sufficient to determine the location of the objects. The purpose of this study was to develop a radiopaque dental acrylic resin, which has clinically detectible radiopacity with minimal change of mechanical properties and color. The radiopacity, color change(CIE 6..E) and microhardness of acrylic resins were determined after mixing barium sulfate or iodide compound. Thermocycling course was conducted to determine the change of characteristic of resins after using for a long time in the mouth. Five or ten percent of barium sulfate to total weight of cured material was mixed with heat curing dental acrylic resin or chemically curing orthodontic resin. In the case of iodide compound, the mixing ratio was two or three percent. After mixing the high radiopaque materials, resin was cured to 20×20×2 mm plate, polished with #600 sand paper and finally polished with Microcloth(Buehler). The specimens were thermocycled in 5 and 55 t distilled water for 2,000 times, and the measurement of radiopacity, color and Vickers hardness was repeated every 500 times thcrmocycling. The radiopacity of specimens on the X -ray films was measured with densitometer(X-rite). The color change was detennined with differential colorimeter(Model TC-6FX, Tokyo Denshoku), and the Vickers hardness number was measured with microhardness tester(Mitsuzawa). The following results were obtained : 1. All the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, had combined effect on the radiopacity of the dental acrylic resins(p<0.0l). 2. The two variables, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of the dental acrylic resins(p<0.01). But the kinds of acrylic resins did not influence on the color change of mixed dental acrylic resins(p>0.05). 3. Each of the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of dental acrylic resins(p<0.0l). 4. The high radiopaque materials used in this study did not yield clinically usable radiopacity, and the color change was great after mixing those materials.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.3
• /
• pp.338-350
• /
• 2007

The objectives of this study were to analyze nutrition-related problems and to develop the nutrition education programs for high school students A survey was conducted with 500 students in the second grade level at high schools in Daegu who differed in socio-economic characteristics. In addition, body composition analysis was accomplished by the Inbody 3.0. The developed questionnaires were distributed and 481 questionnaires were collected with a 96.2% of response rate. Statistical data analysis was completed using SPSS WIN(ver.12.0) for descriptive analysis, reliability analysis, factor analysis, t-tests and $X^2$-tests. We first analyzed students' problems related to nutrition and environmental factors. In a question addressing skipping breakfast, only 11.5% answered they "do not eat" breakfast. In regards to BMI, the male students' degree of obesity was higher. Second, we analyzed living environments, which greatly influence dietary behavior. For the snacks-related categories, most of the students liked bread, cake and other snacks. When they chose the snacks, they mainly considered taste. There were significant difference among the males and females(p<.01) in terms of snacks intake habits, where 43.1 % of the males answered they snack "occasionally" and 43.4% of the females answered they snack "according to how they feel". In the case of beverages, the males consumed significantly more(p<.001). Based on their regional groups, the area A group preferred milk and milk products, and the area B group preferred soft drinks. As for the time of beverage intake, 77.6% of the females answered "with snacks", which was significantly higher than 61.4% of the males(p<.001), 12.2% of the males drank beverages after exercise. For late snacking, 68.0% of the male students and 71.1 % of the female students consumed late snacks. Most of them preferred bread, cake and other snacks. The reasons for taking a late snack were "when I feel hungry" by 61.8% of the males which was higher than the females(p<.001), 23.6% of the females consumed late snacks "impulsively". Ideally, in order to improve the food habits of high school students effective and practical nutrition education programs that consider gender and regional school group, should be carried out.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.3
• /
• pp.399-405
• /
• 1997

Progesterone is necessary for successful pregnancy and had immunosuppressive properties. Peripheral blood mononuclear cells (PBMC) from many women with unexplained recurrent spontaneous abortion responded to trophoblast extract in vitro by prolifertion and releasing soluble, heat-labile factors that are toxic to mouse embryos (embryotoxic factors). Accumulating evidence suggests that T Helper (Th)-1 type immunity to trophoblast is correlated with embryotoxic factor production and is associated with pregnancy loss, while Th2-type immunity is associated with successful gestation. The objective of this study was to determine whether progesterone can inhibit Th1-type cytokine secretion (IFN-${\gamma}$, TNF-${\alpha}$) by trophoblast-activated peripheral blood mononuclear cells from 23 nonpregnant women (age 25-35) with unexplained recurrent abortion (median 5, range 3 to 15)who otherwise produce embryotoxic factors in response to trophoblast. We also determined whether progesterone affected Th2-type cytokines (IL-4, IL-10) in this system in vitro and if IL-10 (1,500 pg/mL) could inhibit Th1-type immunity to trophoblast. IFN-${\gamma}$ was detected in 17 of 23 (74%) trophoblast stimulated PBMC culture supernatants ($77.94{\pm}23.79$ pg/mL) containing embryotoxic activity. TNF-${\alpha}$ was detected in 19 (83%) of these same supernatants ($703.15{\pm}131.36$ pg/mL). In contrast, none of the supernatants contained detectable levels of IL-4 or IL-10. Progesterone ($10^{-5}$, $10^{-7}$, $10^{-9}$M) inhibited Th1-type immunity in a dose dependent manner, but had no effect on Th2-type cytokine secretion. The inhibitory effects of progesterone were abrogated with RU486, but did not affect Th2-type cytokine secretion in trophoblast-activated cell cultures. IL-10, like progesterone also inhibited Th1-type cytokine secretion but had no effect on Th2-type cytokines. These data suggest that therapies designed to suppress Th1-type cytokine secretion in women with recurrent abortion who have evidence of Th1-type immunity to trophoblast may be efficacious in preventing pregnancy loss and should be tested in appropriately designed clinical trials.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.35-40
• /
• 1999

Sr substituted materials for some barium in M-type barium ferrite powder and Co-Ti substituted Sr-Ba hexagonal ferrite powder were prepared by citrate sol-gel method and 2 MOE sol-gel method these hexaferrite particles were reduced for 1hr in the hydrogen gas. The reduction temperatures were varied in the range of 250 $^{\circ}C$ to 500 $^{\circ}C$. X-ray diffraction patterns were measured using diffractometer with Cu $K_{\Alhpa}$ radiation. Mossbauer absorption spectra were measured with a constant acceleration spectrometer. We have focused on studying the origin of increasing $M_s$ by M$\"{o}$ssbauer spectroscopy. Ferrite particles which were sintered at 105$0^{\circ}C$ were found to be typical magnetoplumbite structure and single phase. XRD patterns with varying the reduction temperatures in $Sr_{0.5}Ba_{0.5}Fe_{10}O_{19}$ indicates ferrites particles become composite hexaferrites containing $\alpha$-Fe at T_{red}=350 \;$^{\circ}C$$. On the otherhand, it was found that $Co^{2+}$ ions and $Ti^{4+}$ ions in $Sr_{0.7}Ba_{0.3}Fe_{10}CoTiO_{19}$ prevent from changing $Fe^{3+}$ ions to $\alpha$-Fe during the $H_2$ reduction. Comparing Mossbauer results with XRD results, we have determined most of $\alpha$-Fe are reduced from $4f_{vi}$ sites and 12k sites of $Fe^{3+}$ ions. These $\alpha$-Fe phase bring the induced anisotropy and increase saturation magnetization $M_s$.TEX>.

• YAKHAK HOEJI
• /
• v.44 no.4
• /
• pp.340-346
• /
• 2000

Cervical cancer is one of the leading causes of female death from cancer worldwide with about 500,000 deaths per year. A strong association between certain human papilloma viruses (HPV types 16 and 18) and cervical cancer has been well known. An extract of natural products, named as Somatid, has been used to investigate whether this agent has the ability of inhibiting the oncogenes E6 and E7 of HPV type 16. This Somatid inhibited the proliferation of human cervical cancer cell lines (C-33A, SiHa, CaSki) and HaCaT keratinocytes in a dose response manner, In vitro binding assay and ELISA showed that Somatid inhibited the in vitro biding of E6 and E6AP which are essential for the binding and degradation of the tumor suppressor p53. In addition, Somatid inhibited the in vitro binding of E7 and Rb which is essential tumor suppressor for the control of cell cycle. The levels of mRNA for E6 and E7 were also decreased by Somatid. Our data suggested that Somatid inhibited the oncogenecity of E6 and E7 of HPV 16 type, thus can be used as a putative anti-HPV agent for the treatment of cervical carcinomas caused by HPV.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.706-711
• /
• 2002

High-pure tantalum powder was fabricated through Na reduction process and has been produced by using $K_2$TaF$_{7}$, and KCI, KF for raw material and diluent, respectively. A raw material and diluent were charged at the hestalloy bomb by the weight rate of 1:2, 1:1, 1:0.5 and 1:0.25 each other, investigated properties of morphology, chemical composition and yield and particle size after reduced. Ta metal has been achieved by reduction of $K_2$$TaF_{7}$ 500g with 1% sodium in excess of stoichiometric amount in the charge at a reduction temperature of $850^{\circ}C$ for 3hours. According to amount of the diluent, a formation of the powder doesn't have an effect. The diluent prevented the temperature rising caused from the heat of reaction and it maintained the speed of reducing reaction. But in the mixture ratio of raw material and diluent in the 1 : 2 and 1 : 0.25, an oxide and partially not reacted K were detected. As the amount of diluent increased, the size of tantalum powder decreased. According as raw material and the mixture ratio of diluent change from 1:0.25 to 1:2, the size is decreased from 5$\mu\textrm{m}$ to 1$\mu\textrm{m}$, and a particle size distribution which is below 325 mesh in fined powder increases from 71% to 83%. In the case of average size of Tantalum powder which is the mixture ratio (1:0.5), we would get the Ta powder with grain size about 3$\mu\textrm{m}$, which come close to the average size (2~4$\mu\textrm{m}$) of tantalum powder which is used commonly in the present is Ta powder about 3$\mu\textrm{m}$.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• Journal of the Korean Home Economics Association
• /
• v.48 no.1
• /
• pp.83-96
• /
• 2010

This study was conducted to derive useful predictive variations for the qualitative supply of homes to provide information to real estate venture businesses and other business owners in neighborhood amenities and significant basic information to housing suppliers and policy makers. For this purpose, a number of apartment dwellers in Seoul were surveyed to examine their housing satisfaction, difference in housing satisfaction according to variables, and any relevant correlations. In detail, 500 apartment dwellers in Seoul were surveyed from September 1, 2009 to September 20, 2009 to gather resources that were processed through SPSS 14.0 to find percentage of frequency, mean, standard deviations, t-test, ANOVA, and Duncan Multiple Ranger's Test. The following were the findings of this study: First, housing satisfaction of apartment dwellers in Seoul was above average with the highest satisfaction with neighborhood environment. Second, satisfaction with amenities was significantly affected by dweller-related variables. Gangnam dwellers were more satisfied with housing environment and community environment than Gangbuk dwellers. By age, people in 20s and 30s showed high satisfaction with housing environment. Satisfaction with community environment was high among 20s, 30s and 40s. Satisfaction with management conditions was high among 20s. Also, satisfaction was high when housing period was between 1 and 10 years. By size, dwellers in 40py or larger homes showed high satisfaction with housing environment and management conditions. Dwellers in 30py and 40py or larger homes were satisfied with community environment. By ownership, dwellers with ownership of their homes showed high satisfaction. Third, there was a significant difference in satisfaction with neighborhood and social environments according to dweller-related variables. By region, dwellers of Gangnam area showed high satisfaction with neighborhood environment. By age, people in 20s, 30s and 40s showed high satisfaction with neighborhood environment. Also, satisfaction with neighborhood environment was high when housing period was around 10 years. By size, dwellers in 30py and 40py or larger homes were satisfied with neighborhood and social environments. Fourth, there was a close correlation between satisfaction with housing environment and satisfaction with community environment, and between satisfaction with community environment and satisfaction with management conditions. Thus, most dwellers that were satisfied with one variable of housing environment showed high satisfaction with other variables.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1638-1643
• /
• 2018

Multi-layer ceramic capacitors as decoupling capacitor were fabricated by dielectric composition with a high dielectric constant. The fabricated decoupling capacitors were embedded in the PCB of the 10G RF transceiver module and evaluated for the characteristics of electrical noise by the level of AC input voltage. In order to further improve the electrical properties of the $BaTiO_3$ based composite, glass frit, MgO, $Y_2O_3$, $Mn_3O$, $V_2O_5$, $BaCO_3$, $SiO_2$, and $Al_2O_3$ were used as additives. The electrical properties of the composites were determined by various amounts of additives and optimum sintering temperature. As a result of the optimized composite, it was possible to obtain a density of $5.77g/cm^3$, a dielectric constant of 1994, and an insulation resistance of $2.91{\times}10^{12}{\Omega}$ at an additive content of 5wt% and a sintering temperature of $1250^{\circ}C$. After forming a $2.5{\mu}m$ green sheet using the doctor blade method, a total of 77 layers were laminated and sintered at $1180^{\circ}C$. A decoupling capacitor with a size of $0.6mm(W){\times}0.3mm(L){\times}0.3mm(T)$ (width, length and thickness, respectively) and a capacitance of 100 nF was embedded using a PCB process for the 10G RF Transceiver modules. In the range of AC input voltage 400mmV @ 500kHz to 2200mV @ 900kHz, the embedded 10G RF Transceiver modules evaluated that it has better electrical performance than the non-embedded modules.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.8-14
• /
• 2013

The newly developed fertilizer is the slow-releasing fertilizer which can be used as a basal fertilizer without no additional fertilization at tillering stage. It has 30-4-6% of $N-P_2O_5-K_2O$ and was coated with mixture of LDPE (Low density polyethylene), EVA (Ethylene vinyl acetate), BDP (Bio degraded polymer), TALC and nonionic surfactant for the controlled release up to 50 days after application. Coating materials were designed to be decomposed naturally. This fertilizer can be applied directly to the seedling tray mechanically just before transplanting, resulting in significant labor saving effect. The developed slow-release fertilizer, which can replace both basal fertilization and top dressing at tillering stage by single application directly to seedling tray, showed the highest release at 14~21 days after transplanting. Considering the plant growth at different growth stages and yield, the optimal application rate of developed slow-release fertilizer was 300 g per rice nursery tray and the yield of rice at this application rate was 5.25 MT/ha. Rice quality in terms of head rice grain ratio, amylose content, whiteness, and taste value decreased as fertilization rate increased from 200 g to 500 g per nursery tray. Fertilization rate based on quantity of fertilizer ingredients (N, P, K) was reduced by 49.3% compared to the standard application rate and there was 49.2% reduction in labor input for fertilization.