• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.721-727
• /
• 2007

Stability-enhanced mutants, H44, 11-94, 5A2-84, and F8, of L-threonine aldolase(L-TA) from Streptomyces coelicolor A3(2)(SCO1085) were isolated by an error-prone PCR followed by a high-throughput screening. Each of these mutant, had a single amino acid substitution: H177Y in the H44 mutant, A169T in the 11-94 mutant, D104N in the 5A2-84 mutant and F18I in the F8 mutant. The residual L-TA activity of the wild-type L-TA after a heat treatment for 20 min at $60^{\circ}C$ was only 10.6%. However, those in the stability-enhanced mutants were 85.7% for the H44 mutant, 58.6% for the F8 mutant, 62.1% for the 5A2-84 mutant, and 67.6% for the 11-94 mutant. Although the half-life of the wild-type L-TA at $63^{\circ}C$ was 1.3 min, those of the mutant L-TAs were longer: 14.6 min for the H44 mutant, 3.7 min for the 11-94 mutant, 5.8 min for the 5A2-84 mutant, and 5.0 min for the F8 mutant. The specific activity did not change in most of the mutants, but it was decreased by 45% in the case of mutant F8. When the aldol condensation of glycine and 3,4-dihydroxybenzaldehyde was studied by using whole cells of Escherichia coli containing the wild-type L-TA gene, L-threo-3,4-dihydroxyphenylserine(L-threo-DOPS) was successfully synthesized with a yield of 2.0 mg/ml after 20 repeated batch reactions for 100 h. However, the L-threo-DOPS synthesizing activity of the enzyme decreased with increased cycles of the batch reactions. Compared with the wild-type L-TA, H44 L-TA kept its L-threo-DOPS synthesizing activity almost constant during the 20 repeated batch reactions for 100 h, yielding 4.0 mg/ml of L-threo-DOPS. This result showed that H44 L-TA is more effective than the wild-type L-TA for the mass production of L-threo-DOPS.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.426-433
• /
• 1990

The conditions for immobilization of the partially purified ${\beta}-galactosidase$ form Bacillus subtilis HP4 and the properties of the immobilized enzyme have been investigated. The crude enzyme precipitated with cold acetone was purified about 68-fold through DEAE-cellulose and sephadex G-100 chromatography and its recovery was 19.9% The optimal conditions for Immobilization of enzyme were obtained in 2%(w/v) sodium alginate, 15%(v/v) enzyme solution and 2%(w/v) calcium chloride, and also the optimal stirring thme was 2 hours on the above conditions. The optimum temperature and pH values for immobilized enzyme were $55^{\circ}C$ and 6.5, respectively. Its residual activity was show 25% after heat treatment for an hour at $65^{\circ}C$, and found its high stability in pH 6.0 to 8.0. The enzyme activity was not affected b)· EDTA, 2-mercaptoethanol, KCN, protective agents, and other methal ions except Hg ion and Cu ion. The $K_m\;and\;V_{max}$ values of the immobilized enzyme on ONPG were $1.82{\times}10^{-2}M\;and\;3.57{\times}10^{-8}mole/min$, whereas those on lactose were $2.94{\times}10^{-2}M\;and\;1.68{\times}10^{-7} mole/min$, respectively. The remained enzyme activity for the immobilized enzyme was 95%t of original activity after storage of 40 days at $4^{\circ}C$, and when reused for 5 times was 81%. When skim milk(4.8% lactose) and 5% lactose solution were reacted with the immobilized enzyme(250 units/g) of lactose were 51% and 43%, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1068-1075
• /
• 2000

A study involving nutrient balances and radioisotope labeling techniques was undertaken to study energy and protein metabolism, and glucose kinetics of female crossbred Etawah goats, using 12 weaned (BW $14.0{\pm}2.0kg$), 12 late pregnant (BW $27.8{\pm}1.8kg$) and 12 first lactation does (BW $25.0{\pm}5.0kg$). Each class of animal was randomly allotted into 3 dietary treatment groups R1, R2 and R3, that received 100%, 85%, and 70% of ad libitum feed. The rations offered were pellets containing 21.8% CP and 19.3 MJ GE/kg, except for the lactating does who received pellets (17.2% CP and 18.9 MJ GE/kg) and fresh Penisetum purpureum grass. Energy and nitrogen balance studies were conducted during a two-week trial. Daily heat production (HP, estimated by the carbon dioxide entry rate technique), glucose pool and flux were measured. Equations were found for metabolizable energy (ME) and protein intake (IP) requirements for growing goats: ME (MJ/d)=1.87+0.55 RE-0.001 ADG+0.044 RP $(R^2=0.89)$ and IP (g/d)=48.47+2.99 RE+0.029 ADG+0.79 RP $(R^2=0.90)$; for pregnant does: ME (MJ/d)=5.92+0.96 RE-0.002 ADG+0.003 RP $(R^2=0.99)$ and IP (g/d)=58.34+5.41 RE+0.625 ADG-0.30 RP $(R^2=0.98)$; and for lactating does: ME (MJ/d)=4.23+0.713 RE+0.003 ADG+0.006 RP+0.002 MY $(R^2=0.86)$; IP (g/d)=84.05-5.36 RE+0.055 ADG-0.16 RP+0.068 MY $(R^2=0.45)$, where RE is retained energy (MJ/d), ADG is average daily gain in weight (g/d), RP is retained protein (g/d) and MY is milk yield (ml/d). ME and IP requirements for maintenance for growing goats were 0.46 MJ/d.kg $BW^{0.75}$ and 7.43 g/d.kg $BW^{0.75}$, respectively. Values for the pregnant and lactating does were in the same order, 0.55 MJ/d.kg $BW^{0.75}$ and 11.7 g/d.kg $BW^{0.75}$, and 0.50 MJ/d.kg $BW^{0.75}$ and 10.8 g/d.kg $BW^{0.75}$, respectively. Milk protein ranged from 3.06 to 3.5% and milk fat averaged 5.2%. Glucose metabolism in Etawah crossbred female goat is active, but glucose flux is low compared to temperate ruminant breeds which may implicate its role to support production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1257-1262
• /
• 2002

The objective was to identify the appropriate form of progesterone, which exhibits compact reproductive responses in Awassi ewes during mid to late seasonal anestrous period. Forty-eight Awassi ewes were randomly allocated into four groups to be treated with 60 mg medroxyprogesterone acetate (MAP), 30 mg fluorogestone acetate (FGA), 40 mg FGA, or 600 mg progesterone sponges. After a 12 day period, sponges were removed and ewes were administered i.m. with 600 IU PMSG (d 0, 0 h). Five harnessed Awassi rams were turned-in with the ewes to detect heat. Ewes were checked for breeding marks at 6 h intervals for 5 days. Blood samples were collected from all ewes for analysis of progesterone concentrations. Pretreatment (d -13 and -12) progesterone concentrations were ${\leq}0.2ng/mL$ among all ewes and were indicative of seasonal anestrous period. On d 0, progesterone concentrations were elevated to $1.4{\pm}0.1ng/mL$ in ewes received progesterone sponges only and were higher (p<0.0001) than those (${\leq}0.2ng/mL$) administered MAP or FGA sponges. Progesterone concentrations returned to their basal values of <0.2 ng/mL within 24 h of sponge removal and were similar (p>0.1) among all ewes. Incidence of estrus was similar (p>0.1) among the four groups and occurred in 75% (9/12), 82% (9/11), 67% (8/12) and 58% (7/12) of the ewes receiving MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively. Estrous responses occurred 14.7, 20 and 13.6 h earlier in progesterone-sponge-treated ewes than those of MAP- (p<0.04), 30 mg FGA- (p<0.01) and 40 mg FGA-treated (p=0.06) ewes, respectively. Induced estrus conception rates were 50% (6/12), 55% (6/11), 50% (6/12) and 42% (5/12), out of which 4/6, 4/6, 3/6 and 3/5 lambed 151 days following d 0, and were similar (p>0.1) among ewes of the four treatment groups. Ewes that returned to estrus 16 to 20 days following d 0 were 5/12, 5/11, 6/12 and 4/12 ewes treated with MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively, and all lambed 169 days later. Overall lambing rates were 75% (9/12), 82% (9/11), 75% (9/12) and 58% (7/12) ewes treated with MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively. Results demonstrate that applications of MAP, 30 mg FGA, 40 mg FGA and progesterone sponges Awassi ewes were equally effective in induction of estrus and tended to favor both types of FGA and MAP in overall lambing rates over progesterone sponges during the seasonal anestrous period.

• Korean Journal of Materials Research
• /
• v.21 no.5
• /
• pp.277-282
• /
• 2011

Negative temperature coefficient (NTC) materials have been widely studied for industrial applications, such as sensors and temperature compensation devices. NTC thermistor thick films of $Ni_{1+x}Mn_{2-x}O_{4+{\delta}}$ (x = 0.05, 0, -0.05) were fabricated on a glass substrate using the aerosol deposition method at room temperature. Resistance verse temperature (R-T) characteristics of the as-deposited films showed that the B constant ranged from 3900 to 4200 K between $25^{\circ}C$ and $85^{\circ}C$ without heat treatment. When the film was annealed at $600^{\circ}C$ 1h, the resistivity of the film gradually decreased due to crystallization and grain growth. The resistivity and the activation energy of films annealed at $600^{\circ}C$ for 1 h were 5.203, 5.95, and 4.772 $K{\Omega}{\cdot}cm$ and 351, 326, and 299 meV for $Ni_{0.95}Mn_{2.05}O_{4+{\delta}}$, $NiMn_2O_4$, and $Ni_{1.05}Mn_{1.95}O_{4+{\delta}}$, respectively. The annealing process induced insulating $Mn_2O_3$ in the Ni deficient $Ni_{0.95}Mn_{2.05}O_{4+{\delta}}$ composition resulting in large resistivity and activation energy. Meanwhile, excess Ni in $Ni_{1.05}Mn_{1.95}O_{4+{\delta}}$ suppressed the abnormal grain growth and changed $Mn^{3+}$ to $Mn^{4+}$, giving lower resistivity and activation energy.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.954-959
• /
• 1997

The solid solutions of the $Sr_{1-X}M_XFeO_{3-y}$ (x=0.1, 0.2, 0.3, 0.4, 0.5, M=Ca) system having perovskite structures were prepared in air by heat treatment at 1473 K for 18hr. X-ray diffraction assigns cubic system for all the samples and shows that the lattice volume of each system decreases with increasing x value until x=0.3, but increases abruptly from x=0.4. The mole fractions of $Fe^{4+}$ ion($\tau$ value), the amounts of oxygen vacancy (y value) and finally nonstoichiometric chemical formulas for each composition were determined from Mohr salt analysis. TG/DTA thermal analysis (temperature range: 300~1173K) exhibits that 3-y values of the samples having x=0.1 and 0.2, decrease with temperature and increase almost reversibly with decreasing temperature. The samples of $x{\geq}0.3$, however, didn't show the reversible weight change and the 3-y values of them were nearly 2.5 in cooling process. Conductivities of each sample were varied within the semiconductivity range at relatively low temperature. And the conductivity at constant temperature decreases steadily with x value. The conduction mechanism of this ferrite system may be proposed as a hopping model of conducting electrons between the mixed valence states. At high temperature semiconductivity of each sample changed into metallic property.

• Journal of Hydrogen and New Energy
• /
• v.27 no.5
• /
• pp.517-525
• /
• 2016

The present work investigates the effect of $K_2CO_3$ catalyst on steam gasification of Kideco coal and the deactivation of the catalyst due to thermal exposure and interaction with coal ash. The gasification reactivity at $700^{\circ}C$ is highly enhanced by $K_2CO_3$, which is not deactivated by the heat treatment at $T{\leq}800^{\circ}C$. TGA and XRD results prove minor decomposition of $K_2CO_3$ after the calcination at $800^{\circ}C$. $K_2CO_3$ is, however, evaporated at the higher temperature. Assuming the conversion of $K_2CO_3$ into $K_2O$ by the decomposition and into $K_2O{\cdot}2.5SiO_2$ and $KAlO_2$ by the interaction with coal ash, the reactivity of the gasification is evaluated in the presence of $K_2O$, $K_2O{\cdot}2.5SiO_2$ and $KAlO_2$. Among them, $K_2O$ is the most active, but much lower in the activity than $K_2CO_3$. XRD results show that $K_2CO_3$ could react readily with the ash above $700^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.14 no.3
• /
• pp.197-202
• /
• 1982

Kinetic study for the thermal degradation of ginsenosides in ginseng extract was conducted. The results indicate that the thermal degradation followed first order kinetics and rate constants varied substantially depending on the types of ginsenosides and heat treatment temperatures. Activation energy calculated by Arrhenius plots ranged from 16.80 kcal/mole to 30.10 kcal/mole and $Q_{10}$ values ranged from 2.01 to 3.49. Correlation coefficients between the change of ginsenoside contents by thermal degradation and heat treatment temperature were $0.995{\sim}0.999$. The dependence on temperatures of the decomposition rate constant of total ginsenoside can be expressed as $k=4.574{\times}10^8$ exp(8898.8/T).

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.21-27
• /
• 2015

The Phoenix-shaped Glass Ewer, which is No. 193 National Treasure, was seriously damaged by a unique form of green glass pieces when excavated among a number of burial accessories of Hwangnamdaechong known to have been formed in the 5th century. While it has long been exhibited at the National Museum of Korea since its treatment for conservation treatment at conservation science laboratory in 1984, the existing adhesive materials seriously deteriorated for the 30 years, and the condition was quite unstable. The epoxy resin used as a restorative materials turned yellowing due to the light and heat so much that it was no longer able to exhibit it in a stable and effective manner. As a result, a re-treatment for conservation was conducted lately. This study focuses on the three pieces of Gold wires used to carefully wrap up the handle of the Phoenix-shaped Glass Ewer broken into three pieces, which has not been studied so far. As for the analysis method for Gold wires, SEM-EDS and Stereo Microscope were used for nondestructive analysis. First of all, the result of the SEM-EDS analysis shows that the composition was Au 91.9 wt.%-Au 92.8 w.t% and Ag 5.9 wt.%-Ag 6.5 wt.%, which indicates that it was an alloy made of Au and Ag. The production technique of Gold wires was also observed by means of optical microscopes. In general, Gold wires were manufactured by a drawing process in which a lump of gold was beaten or pulled out of a hole or by a process of twisting a gold plate. However, Gold wires separated from the handle of the Phoenix-shaped Glass Ewer did not involve any trace of twisting on the surface. Rather, fine vertical stripes were observed with the sections filled up. Hence, it is thought that this Ewer went through a drawing process and then was mended. As a result, no certain relation with the golden mending material used for the Phoenix-shaped Glass Ewer was verified. The findings above indicate that most of the existing researches on Gold wires recognized them, not as separate remains, but merely as a component of other golden remains. Thus, there has been little systematic study on the manufacturing techniques of Gold wires. The future study on Gold wires may verify the correlation between the Gold wires used to fix the handle of the Phoenix-shaped Glass Ewer, which is examined in this study, with that of golden remains in the Silla era.

• Journal of Hydrogen and New Energy
• /
• v.17 no.4
• /
• pp.379-388
• /
• 2006

Two mesophilic trickling bed bioreactors filled with two different types of media, hydrophilic- and hydrophobic-cubes, were designed and conducted for hydrogen production under the anaerobic fermentation of sucrose. Each bioreactor consisted of the column packed with polymeric cubes and inoculated with heat-treated sludge obtained from anaerobic digestion tank. A defined medium containing sucrose was fed by the different hydraulic retention time(HRT), and recycle rate. Hydrogen concentrations in gas-phase were constant, averaging 40% of biogas throughout the operation. Hydrogen production rate was increased till $10.5\;L{\cdot}h^{-1}{\cdot}L^{-1}$ of bioreactor when influent sucrose concentrations and recycle rates were varied. At the same time, the hydrogen production rate with hydrophobic media application was higher than its hydrophilic media application. No methane was detected when the reactor was under a normal operation. The major fermentation by-products in the liquid effluent of the both trickling biofilters were acetate, butyrate and lactate. In order to run in the long term operation of both reactor filled with hydrophilic and hydrophobic media, biofilm accumulation on hydrophilic media and biogas produced should be controlled through some process such as periodical backwashing or gas-purging. Four sample were collected from each reactor on the opposite hydrogen production rate, and their bacterial communities were compared by terminal restriction fragment length polymorphism (T-RFLP) analysis of PCR products generated using bacterial 16s rRNA gene primers (8f and 926r). It was expressed a marked difference in bacterial communities of both reactors. The trickling bed bioreactor with hydrophobic media demonstrates the feasibility of the process to produce hydrogen gas. A likely application of this reactor technology can be hydrogen gas recovery from pre-treatment of high carbohydrate-containing wastewaters.