• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.402-408
• /
• 2005

The purpose of this study was to investigate the effects of estrogen deficiency on pulpodentinal complex of tooth in ovariectomized rats. Thirty female Sprague-Dawley rats, 10 weeks old, were used. Rats were grouped into two groups. One group (n = 15) was subjected to sham surgery (SHAM) and the other group (n = 15) was ovariectomized bilaterally (OVX). Animals were sacrificed 12 weeks later, and their mandibular molars and associated periodontal supporting tissues were dissected out, and fixed in $10\%$ buffered formalin. For comparison of groups, immunostained for osteonectin. Histomorphometrical measurement of change of teeth was performed using an image analysis system and paired t-test was used and the level of significance for overall differences was set at p < 0.05. In immunostaining of osteonectin, they were significantly different from each other. The predentin thickness in OVX rats was wider than in SHAM rats. And in SHAM rats, osteonectin was more specifically stained in predentin areas than in OVX rats. These results indicate that estrogen deficiency increased the unmineralized predentin areas and decreased osteonectin content in pulpal tissues in rats. If our result is applicable to human studies, odotoblast is affected by estrogen deficiency.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.2
• /
• pp.58-67
• /
• 1995

The paper describes the variation of magnetic fields caused by the operation of induction motors. The measuring system consists of the self-integrating magnetic field sensor, amplifier, and active integrator. From the calibration experiments, the frequency bandwidth of the magnetic field measuring system ranges from 20[Hz] to 300[kHz] and sensitivity is 0.234(mV/$\mu\textrm{T}$]. The magnetic fields generated under steady state and starting operations of duction motor are recorded by the proposed measuring system, and the fast Fourier transformation(FFT) of the measured data is performed to analyze the harmonic components. A single pulsed magnetic field is strongly caused by direct starting the induction motor, and its peak value is greater than 5 times as compared with the steady state value. The long transient duration and high intensity originates from the large inductance and dynamic characteristic of the induction motor, During the steady state operation of induction motor, subharmonics of magnetic field components, which depend on the pole number of induction motor, are observed. The lower order power-line harmonics can be inferred from the voltage flicker and current ripple which are derived from the torque fluctuation of induction motor. In the case of the induction motor drived by inverter, the harmonics of magnetic field are much more than those caused by direct starting method and are found generally to increase with decreasing the driving frequency.

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.65-74
• /
• 2010

Objectives : This study was to investigate the effects of Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi Pharmacopuncture on autonomic nervous system with Heart Rate Variability(HRV). Purpose of the trial was to observe what influence Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi pharmacopuncture have on the autonomic nervous system. Methods : 40 healthy male volunteers were divided into two experimental groups, such as Cervi Pantotrichum Cornu Pharmacopuncture group and Bovis calculus Fel Ursi Pharmacopuncture group. Study design was a randomized, double-blind clinical trial. 20 subjects in one experimental group were injected Cervi Pantotrichum Cornu Pharmacopuncture, 20 subjects in other experimental group were injected hydrolyzed Bovis calculus Fel Ursi Pharmacopuncture at GB21(Kyonjong). We measured HRV 7 times : baseline measurement and every 5 minutes for 30 minutes after injection. The SPSS 15.0 for Windows was used to analyze the data by the paired t-test(in group) and independent sample t-test(between the groups). Results A. Time Domain Analysis 1. Analysis of Mean HRV, SDNN and Complexity After injection of Cervi Pantotrichum Cornu Pharmacopuncture, Mean HRV was significantly decreased all the times after injection. SDNN was significantly increased at immediate and 25 minute after injection. Complexity was significantly decreased only at 15 minute after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, Mean HRV was significantly decreased all the times after injection. Complexity was significantly decreased at 15 minutes after injection. 2. Analysis of HRV index, pNN50 After injection of Cervi Pantotrichum Cornu Pharmacopuncture, HRV index was significantly increased immediately after injection. pNN50 was significantly decreased at immediately, 20 and 25 minutes after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, HRV index was significantly increased immediately after injection. pNN50 was significantly decreased at immediate and 25 minutes after injection. B. Frequency Domain Analysis 1. Analysis of Ln(TP), Ln(HF), Ln(LF), Ln(VLF) After injection of Cervi Pantotrichum Cornu Pharmacopuncture, Ln(TP) was significantly increased at immediate and 25 after injection. Ln(HF) was significantly increased all the times after injection. Ln(LF) was significantly increased at 15, 20 and 25 minutes after injection. Ln(VLF) was significantly increased at immediate and 25 minutes after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, Ln(TP) was significantly increased at immediately and 25 after injection. Ln(LF) was significantly increased at 20 and 25 minutes after injection. Ln(VLF) was significantly increased at immediate and 25 minutes after injection. Conclusions : We results suggest that Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi Pharmacopuncture in healthy adult men tend to activate the autonomic nervous system and sympathetic nervous system within normal range.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.239-246
• /
• 2013

The purpose of this study was to identify the effects of family resilience on the positive attitudes toward a children with disabilities of non-disabled siblings. For this purpose, a survey data was collected from 110 siblings with disabled children. The general characteristics of the parent questionnaire, and the general characteristics of a child with a disability, non-disability sibling's general characteristics, be receptive attitude, consisted of family resilience, and the data were analyzed by frequency analysis, descriptive statistics, t test, ANOVA and regression analysis by SPSS 18.0. Structural equation was used for black AMOS18. The results of the measurement analysis were summarized as follows: 1. family resilience showed positive correlation with positive attitudes toward a children with disabilities of non-disabled siblings. 2. as a result of regression analysis for find out influence of family resilience on the positive attitude of non-disabled siblings, family resilience was statistically significant influence factors, which 50%, 50% explanatory power. In conclusion, these results reinforce the important of considering family context as a contributor to the positive attitudes toward a children with disabilities of non-disabled siblings, so it could be suggested that family resilience needs to be improve.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.617-623
• /
• 2012

This study was performed to measure the accuracy of different gypsum materials by a white light dental scanner. A master model with the prepared lower full arch tooth was used. The type IV and scannable stone were used for 20 stone casts (10 casts each) duplicated a master model of mandible. The distance between the reference points were measured and analyzed by the Delcam $Copycad^{(R)}$ (Delcam Plc, UK) 3D graphic software. The t-student test for paired samples were used for statistical analysis. The mean differences to master model for type IV stone and scannable stone model were 0.29~0.56 mm, and 0.17~0.35 mm, respectively. There were statistical differences in dimensional accuracy for full arch impression between the master model and type IV/scannable stone (p<0.05). Two different gypsum materials showed clinically acceptable accuracies of full arch digital impression produced by them. Besides, in both gypsum materials, the differences to the master model detected appear to provide enough accuracy for clinical application.

• Journal of Korean Academy of Oral Health
• /
• v.42 no.4
• /
• pp.159-166
• /
• 2018

Objectives: The aim of this study was to investigate the association between masticatory ability, oral health-related quality of life, and cognitive function in an elderly population using structural equation modeling. Methods: A total of 308 subjects, aged 65 years and over, were recruited from the senior citizen center in Daegu, South Korea and provided consent for inclusion in the study. The Korean version of the Mini-Mental State Examination (K-MMSE) was used to assess the level of cognitive function. Masticatory ability was evaluated through chewing tests, patient-perceived masticatory function and, measurement of relative occlusal forces on molar teeth using the T-Scan $III^{(R)}$ system. All data were analyzed using ${\chi}^2$ tests, t-tests, and one-way ANOVA in SPSS version 23.0 for windows. Structural equation modeling was performed using SPSS AMOS version 22.0. Results: There was a significant association between cognitive function and molar teeth occlusal force. Ability of food chewing score and patient-perceived masticatory function could affect oral health-related quality of life (P>0.05). Higher occlusal forces on molar teeth, compared to anterior teeth, positively correlated with higher cognitive function. Conclusions: These results suggest that an individual's oral health condition could affect molar teeth occlusal forces and may be related to a risk of developing dementia. Therefore, there is a need for implementing nation-wide policies to improve oral health, such as masticatory function, in the elderly population.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.457-467
• /
• 2020

This study was conducted to for the development of nursing education programs suitable for the period by identifying the unmet needs of kidney transplant surgery patients who need continuous self-care according to the elapsed period. The subjects of the study consisted of 84 inpatients and outpatients for up to 1 year after kidney transplant surgery. The data collection period was from February 17 to May 31, 2020, and the collected data were analyzed by Chi-square, independent t-test, one-way ANOVA, and post-test by Scheffé using the IBM SPSS 21.0 program. As a measurement tool, the Comprehensive Needs Assessment Tool in Cancer(CNAT), a tool to assess unmet needs of cancer patients, was modified and supplemented to receive expert validity, and then self-report through a questionnaire consisting of a total of 57 questions. As a result of the study, the average of the total score out of 171points for the unmet needs of kidney transplant patients was 68.28(±38.88), and information and education accounted for the highest score of 17.92(±8.36) out of the eight sub-areas. The unmet needs according to the elapsed period were significantly higher in the 6 months ~1 year group(F=7.57, p=.001) compared to the 3-6 months group. Based on this, it is necessary to develop a nursing intervention program that can provide appropriate information and support at a time when the unmet needs of patients up to increase from 6 months to one year after kidney transplantation increase.

• Korean Journal of Food Science and Technology
• /
• v.20 no.6
• /
• pp.820-826
• /
• 1988

The freezing point$(t_f)$, latent heat of freezing$({\triangle}\;H_f)$ and kinetic constant of fleering$(k_f)$ were determined from DSC thermogram at cooling rate $-2.5^{\circ}C/min{\sim}-10.0^{\circ}C/min$. The freezing point of various starches was decreased with an increase in cooling rate, and that of whole starches were lower than defatted starches. Changes of the latent heat of freezing was not observed at above cooling rate $-2.5^{\circ}C/min$. The latent heat of freezing$({\triangle}\;H_f)$ could be deduced as a function of water content(W) as follows: ${\triangle}\;H_f=0.700W-13.048$, (Kcal/kg) $(35%{\leqq}W{\leqq}70%)\;{\triangle}\;H_f=1.569W-73.861,\;(Kcal/kg)\;(W{\geqq}70%$) In the water content range $35{\sim}90$(wt %), the activation energy of various starches in freezing process was determined $126{\sim}270$ Kcal/mol.

• Korean Journal of Radiology
• /
• v.22 no.11
• /
• pp.1909-1917
• /
• 2021

Objective: Muscle quantity and quality can be measured with an automated system on CT. However, the effects of contrast phases on the muscle measurements have not been established, which we aimed to investigate in this study. Materials and Methods: Muscle quantity was measured according to the skeletal muscle area (SMA) measured by a convolutional neural network-based automated system at the L3 level in 89 subjects undergoing multiphasic abdominal CT comprising unenhanced phase, arterial phase, portal venous phase (PVP), or delayed phase imaging. Muscle quality was analyzed using the mean muscle density and the muscle quality map, which comprises normal and low-attenuation muscle areas (NAMA and LAMA, respectively) based on the muscle attenuation threshold. The SMA, mean muscle density, NAMA, and LAMA were compared between PVP and other phases using paired t tests. Bland-Altman analysis was used to evaluate the inter-phase variability between PVP and other phases. Based on the cutoffs for low muscle quantity and quality, the counts of individuals who scored lower than the cutoff values were compared between PVP and other phases. Results: All indices showed significant differences between PVP and other phases (p < 0.001 for all). The SMA, mean muscle density, and NAMA increased during the later phases, whereas LAMA decreased during the later phases. Bland-Altman analysis showed that the mean differences between PVP and other phases ranged -2.1 to 0.3 cm² for SMA, -12.0 to 2.6 cm² for NAMA, and -2.2 to 9.9 cm² for LAMA.The number of patients who were categorized as low muscle quantity did not significant differ between PVP and other phases (p ≥ 0.5), whereas the number of patients with low muscle quality significantly differed (p ≤ 0.002). Conclusion: SMA was less affected by the contrast phases. However, the muscle quality measurements changed with the contrast phases to greater extents and would require a standardization of the contrast phase for reliable measurement.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.333-344
• /
• 2011

Cleaning of foreign matter and corrosion products on surface among conservation treatment of iron artifacts is an important part for looking up a original form. The sand blaster is the most popular equipment when it removes the foreign matter and corrosion products on iron artifacts surface. Current foreign matter and corrosion products equipment, which mostly uses, is sand blaster. Glass dust which sprayed from sand blaster is harmful and causing environmental pollution. In order to solve these problems, we investigated the $CO_2$ snow cleaning that use a eco-friendly equipment to apply for cleaning foreign matter and corrosion products on surface of iron artifacts. It examined by using sand blaster and $CO_2$ snow cleaning to aged steel coupon and iron artifacts. In case of aged steel coupon, the result showed that the sand blaster and $CO_2$ snow cleaning methods were similar to the degrees of cleaning foreign matter and corrosion products, through surface roughness, color measurement and SEM. $CO_2$ snow cleaning applied to aged steel coupons weren't worn out the surface in comparison with sand blaster by SEM. When applied to the iron artifacts, power nozzle of the $CO_2$ snow cleaning was an excellent cleaning effect that surface wern't worn out in comparison with sand blaster. And, it showed that internal structure change of metal was no found before and after cleaning by X-ray radiography. Consequently, we confirmed that cleaning of the sand blaster and power nozzle of $CO_2$ snow cleaning were similar to the effect. But, it's very careful to use this method because of high outlet pressure of power nozzle for applying to the iron artifacts. As a result of experiments, it could be found that the cleaning methods should be selected depending on internal state of the artifacts.