• Investigative Magnetic Resonance Imaging
• /
• v.23 no.3
• /
• pp.202-209
• /
• 2019

Purpose: To investigate the temperature-based differences of cortical bone ultrashort echo time MRI (UTE-MRI) biomarkers between body and room temperatures. Investigations of ex vivo UTE-MRI techniques were performed mostly at room temperature however, it is noted that the MRI properties of cortical bone may differ in vivo due to the higher temperature which exists as a condition in the live body. Materials and Methods: Cortical bone specimens from fourteen donors ($63{\pm}21$ years old, 6 females and 8 males) were scanned on a 3T clinical scanner at body and room temperatures to perform T1, $T2^*$, inversion recovery UTE (IR-UTE) $T2^*$ measurements, and two-pool magnetization transfer (MT) modeling. Results: Single-component $T2^*$, $IR-T2^*$, short and long component $T2^*s$ from bi-component analysis, and T1 showed significantly higher values while the noted macromolecular fraction (MMF) from MT modeling showed significantly lower values at body temperature, as compared with room temperature. However, it is noted that the short component fraction (Frac1) showed higher values at body temperature. Conclusion: This study highlights the need for careful consideration of the temperature effects on MRI measurements, before extending a conclusion from ex vivo studies on cortical bone specimens to clinical in vivo studies. It is noted that the increased relaxation times at higher temperature was most likely due to an increased molecular motion. The T1 increase for the studied human bone specimens was noted as being significantly higher than the previously reported values for bovine cortical bone. The prevailing discipline notes that the increased relaxation times of the bound water likely resulted in a lower signal loss during data acquisition, which led to the incidence of a higher Frac1 at body temperature.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.6
• /
• pp.717-726
• /
• 2005

Statement of problem. One of the common problems of provisional crown and fixed partial denture materials is that when they are subjected to constant loads for a long period of time, they exhibit a dimensional change (creep). Purpose. The aim of this study was to investigate the viscoelastic behaviour of polymer-based provisional crown and fixed partial denture materials with time at constant compressive load. Material and methods. Three dimethacrylate-based materials (Protemp 3 Garant, Temphase, Luxatemp) and one monomethacrylate-based material (Trim) were selected. Dimensional changes of the specimens were recorded by a LVDT to evaluate their viscoelastic behavior and creep strain. For all specimens, two loading procedures were used. At first, static compressive stress of 4 MPa was applied for 30 minutes and followed by 1 hour of strain recovery. Then, after 24 hours of water storage, the specimens were loaded again. The creep values between materials were statistically analyzed using one-way ANOVA and multiple comparison $Scheff\acute{e}$ test. Independent samples t-test was also used to identify the difference of creep strain between first and secondary loading conditions at the significance level of 0.05. Results. Following application of the first loading, Trim showed the highest maximum creep strain (32.7%) followed by Luxatemp, Protemp 3 Garant and Temphase, with values of 3.78%, 2.86% and 1.77%, respectively. Trim was significantly different from other materials (P<0.05), while there were no significant differences among Luxatemp, Protemp 3 Garant and Temphase (P>0.05). The highest recovery and permanent set of Trim, were significantly different from those of others (P<0.05). At the secondary loading of the dimethacrylate-based materials, creep deformation, recovery and permanent set decreased and the percentage of recovery increased, while in Trim, all values of the measurements increased. This result showed that the secondary loading at 24 hours produced a significant creep magnitude. Conclusion. The dimethacrylate-based provisional crown and fixed partial denture materials showed significantly higher creep resistance and lower deformation than the monomethacrylate-based material. Thus, monomethacrylate-based materials should not be used in long-term stress-bearing situations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.12
• /
• pp.1121-1126
• /
• 2010

This study is to investigate the effects of aromatics and T90 for low cetane number (CN) fuels on combustion and exhaust emissions in low-temperature diesel combustion. We use a 1.9-L common rail direct injection diesel engine at 1500 rpm and 2.6 bar BMEP. Low temperature diesel combustion was achieved via a high external EGR rate and strategic injection control. The tested fuels four sets: the aromatic content was 20% (A20) or 45% (A45) and the T90 temperature was $270^{\circ}C$ (T270) or $340^{\circ}C$ (T340) with CN 30. Given the engine operating conditions, the T90 was the stronger factor on the ignition delay time, resulting in a longer ignition delay time for higher T90 fuels. All the fuels produced nearly zero PM because of the extension of the ignition delay time induced by the low cetane number. The aromatic content was the main factor that affected the NOx and the NOx increased with the aromatic content.

• Journal of Forest and Environmental Science
• /
• v.33 no.4
• /
• pp.330-341
• /
• 2017

Tropical forests play a key role for functioning of the planet and maintenance of life. These forests support more than half of the world's species, serve as regulators of global and regional climate, act as carbon sinks and provide valuable ecosystem services. Forest floor biomass and litterfall dynamics was measured in different sites influenced by fire in a seasonally dry tropical forest of Bhoramdeo wildlife sanctuary of Chhattisgarh, India. The forest floor biomass was collected randomly placed quadrats while the litterfall measured by placing stone-block lined denuded quadrat technique. The seasonal mean total forest floor biomass across the fire regimes varied from $2.00-3.65t\;ha^{-1}$. The total litterfall of the study sites varied from $4.75-7.56t\;ha^{-1}\;yr^{-1}$. Annual turnover of litter varied from 70-74% and the turnover time between 1.35-1.43 years. Monthly pattern of forest floor biomass indicated that partially decayed litter, wood litter and total forest floor were differed significantly. The seasonal variation showed that leaf fall differed significantly in winter season only among the fire regimes while the wood litter was found non significant in all the season. This study shows that significant variation among the site due to the forest fire. Decomposition is one of the ecological processes critical to the functioning of forest ecosystems. The decomposing wood serves as a saving account of nutrients and organic materials in the forest floor. Across the site, high fire zone was facing much of the deleterious effects on forest floor biomass and litter production. Control on such type of wildfire and anthropogenic ignition could allow the natural recovery processes to enhance biological diversity. Chronic disturbances do not provide time for ecosystem recovery; it needs to be reduced for ecosystem health and maintaining of the high floral and faunal biodiversity.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.243-250
• /
• 2020

The purpose of this study is to find out the possibility of applying microwave-hypochlorous acid leaching to effectively leaching Au in hydrothermal minerals on board. The comparative leaching experiment were confirmed that the leaching rate of Au with(T1)/with out(T2) of microwave nitric acid leaching. In addition, the leaching rate of Au on the conventional leaching by mechanical agitation(T3) and microwave leaching was compared. The result of microwave nitric acid leaching(solid-liquid ratio; 10%, leaching temperature; 90 ℃, leaching time; 20 min) confined that the metal leaching rate was high in the order of As>Pb>Cu>Fe>Zn, and the content of Au in the leaching residue was increased from 33.77 g/ton to 60.02 g/ton. As a result of the comparative leaching experiment using a chloride solvent, the dissolution rate of Au was high in the order of T1(61.10%)>T3(53.30%)>T2(17.30%). Therefore, chloride, which can be manufactured using seawater and that can be recycled by collecting chlorine gas generated in the leaching process, is expected to be an optimal solvent for Au leaching. In addition, the application of microwaves is believed to be effective in terms of time, efficiency and energy.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.10
• /
• pp.1182-1186
• /
• 2001

Objectives : MR fluid-attenuated inversion recovery(FLAIR) image uses paired long inversion time and relaxation time that nulls the signal from CSF. With nulling of the CSF long echo time readout could be used to increase T2-weighting, hence improving the conspicuousness of most tissue lesions without the deleterious effects of CSF artifact seen on T2 weighted sequence. We examed the usefulness of FALIR image in the diagnosis of mild head injury. Methods : A total of 38 patients with mild head injury were examined by FLAIR image. We compared those images with CT scan and T1, T2-weighted images. Careful observation of MR images were done by two well-trained neuroradiologists. Each image was compared for conspicuousness and detectability of traumatic lesions might have shown abnormal signal intensities. The Wilcoxon signed ranks test was used for statistical evaluation. Results : The FLAIR image was significantly more sensitive than those of other images(p<0.001). T2 FFE(Fast Field Echo) image was more useful for detection of small petechial hemorrhages. Conclusion : FLAIR image is considered to be more sensitive than those of conventional MR images in the evaluation of mild head injuries.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.371-377
• /
• 2011

The aim of this study is to investigate the effects of aromatics and T90 temperature for high cetane number (CN) of diesel fuels on combustion and exhaust emissions in low-temperature diesel combustion in a 1.9 L common rail direct injection diesel engine at 1500 rpm and 2.6 bar BMEP. Four sets of fuels with CN 55, aromatic content of 20% or 45% (vol. %), and T90 temperature of $270^{\circ}C$ or $340^{\circ}C$ were tested. Given engine operating conditions, all the fuels showed the same tendency of decrease of PM with an increase of an ignition delay time. At the same ignition delay time, the fuels with high T90 produced higher PM. At the same MFB50% location the amount of NOx was similar for all the fuels. Furthermore, at the same ignition delay time the amounts of THC and CO were similar as well for all the fuels. The amount of THC and CO increased with an extension of the ignition delay time mainly because of the increase of fuel-air over-mixing.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.28-33
• /
• 2005

A resource recovery technique using sub- and supercritical water hydrolysis was applied to recover amino aicds from waste fish entrails. The effect of reaction parameters such as temperature and time necessary for the control of reaction towards optimum yield of amino acids was investigated using semi-batch and batch reactors. Results showed a maximum yield of total amino acids (137 mg/g-dry entrails) from waste fish entrails at T=$250^{\circ}C$ (P=4 MPa) and reaction time of 60 min in a batch reactor. Under supercritical conditions (e.g., T=$400^{\circ}C$, P=45 MPa), the yield decreased due to rapid decomposition compared to production rate of amino acids. As a result, the low temperature and the short reaction time were needed to produce a maximum yield of amino acids.

• Journal of Aquaculture
• /
• v.19 no.4
• /
• pp.305-309
• /
• 2006

This study was carried out to examine the anesthesia and recovery time of the male and gravid female of marine benthic copepod Tigriopus japonicus at 500, 750, 1,000 ppm of MS-222. We also investigated the survival (%) and the nauplii production of T. japonicus for 14 days, which was anesthetized with MS-222. As the concentration of MS-222 was higher, the anesthesia time of the copepod was shorter and the recovery time was longer. The survival (%) of male T. japonicus was significantly higher than that of the gravid female both in anesthetized and control group. But the survival (%) of the male treated with MS-222 did not show the different survival (%) with the control (0 ppm). In contrast, the survival (%) of the gravid female treated with 750 and 1,000 ppm was significantly lower than that of 500 ppm and control. With regard to hatching, as the concentrations was higher, the number of hatching and total nauplii were lower and interval of hatching was longer. However, the gravid female treated with 500 ppm did not show the significant difference with control. We suggest that 500 ppm of MS-222 is the suitable concentration in isolation of T. japonicus.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2011

The underlying principle of environmental conservation and restoration is to receive continuous services from nature. In this context, the basic objective of oil spill response and recovery activities is to allow affected residents to retain sustainability of their daily livelihood and productive environment. Hence, monitoring the status of socio-economic impact and the extent of restoration is an important parameter in the restoration effort to repair the damaged functions of environmental services with oil spill accident. However, assessment of socio-economic impact poses investigators with much difficulties in selecting the most appropriate approaches because the process often involves various stakeholders, directly and indirectly. Moreover, the analyses and interpretation of the results also pose a great challenge. The present study monitored fisheries and tourism numbers which were considered as major local socio-economic indicators of living and production environment affected by M/T Hebei Spirit oil-spill accident. This monitoring was conducted by examining the published papers and statistical reports. This was supplemented by surveying how the local residents actually felt about the damage and recovery for the first time in Korea. The results showed that the rate of the recovery was about 40~50 %, and the rate of the recovery seemed to be slowed or decreased. However, what the local residents actually felt was 2~10 points less than the literature surveys and statistical reports. These results suggested limits to using only the literature and statistical surveys for the traditional socio-economic impact assessment. The study also showed the need to include in the impact assessment process what and how the local residents actual feel about the oil spill damage and recovery process.