• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.145-151
• /
• 2004

According to the development of the aircraft industry, the fatigue strength of Aluminum Alloy becomes a great important material, but it seems that we don't understand an effect on the crack growth behaviour very well. This thesis is not only studied about the five kinds of 2017-T3, 2023-T3, 5083-0, 7075-T6, 7N01-T6 among the Aluminum Alloy which are the main materials of the aircraft, but also small or large relations against the fatigue strength of them. The consequence of the research was being progressed the accordance with the order. That is, The order is 2024-T3> 2017-T3> 7N01-T6> 7075-T6> 5083-0. These inclusion came out the acceleration phenomena in the crack growth behaviour among the high ${\Delta}K$ section Nevertheless I figured out their effects were being ignored at the 2b step.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1891-1893
• /
• 2004

이 논무에서는 유입식 변압를 대상으로 UHF 대역의 펄스신호를 검출하는 센서를 소개하고, 이를 이용한 방전 결함별 측정 결과를 소개한다. 측정결과는 기존의 PRPD법과 주파수 Domain과 위상 Domain에 대한 정보를 가지는 p-f-q 분석으로 측정 하였으며, 본 논문에서는 후자의 결과를 중심으로 서술 하였다.

• Electronics and Telecommunications Trends
• /
• v.20 no.4 s.94
• /
• pp.198-207
• /
• 2005

최근의 국제 표준화 동향은 특허 등 IPR(지적재산권)을 필수적으로 고려하고 있는 상황으로서, 선진 각국은 자국 개발 기술의 IPR 확보와 이의 국제 표준화를 연계시킴으로써 세계 정보통신 시장의 선점을 통하여 핵심적인 위치를 공고히 하고 있다. 본 고에서는 국제 표준화 기구(ITU-T)의 지적재산권 정책 및 관련 논의 동향을 살펴본다. 그리고 ITU-T에서 개발한 권고에 포함된 특허에 대하여 각 국가 및 기관이 대상 권고 및 특허 관련 정보 등을 ITU-T 사무국(TSB)에 통지한 Patent Statement and Licensing Declaration(특허 성명 및 라이선싱 선언서)로 구성된 Patent DB 분석을 통해 ITU-T의 개발 권고에 포함된 각 국가 및 주요 기관별 특허 현황을 살펴보고 그 함의를 모색해 보고자 한다.

• Transactions of Materials Processing
• /
• v.16 no.5 s.95
• /
• pp.364-369
• /
• 2007

The effect of temperature on the forming limit diagram was investigated for AZ31B magnesium alloy sheet through the limit dome height test in the range from room temperature to $300^{\circ}C$. The formability of AZ31B sheet was improved significantly according to the increasing temperature. Also we studied the springback characteristics through the 2D draw bending test with different blank holding forces at elevated temperatures. Springback quantity was considerably reduced as temperature went up. The blank holding force in the range used, however, had little influence on springback. Experimental results obtained in this study may provide a material database for AZ31B sheet.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.587-594
• /
• 2023

In this paper, we present the design and optimization process of an on-body microstrip patch antenna with a paired T-type defect for monitoring fracture recovery of human legs. This antenna is designed to be light, thin and compact despite the improvement of return loss and bandwidth performance by adjusting the size of the T-type defect. The structure around the applied human leg is structured as a 5-layer dielectric plane, and the complex dielectric constant of each layer is calculated using the 4-pole Cole-Cole model parameters. In a normal case without bone fracture, the return loss of the on-body antenna is -66.71dB at 4.0196GHz, and the return loss difference ΔS₁₁ is 37.95dB when the gallus layer have a length of 10.0mm, width of 1.0mme, and height of 2.0mm. A 3'rd degree polynomial is presented to predict the height of the gallus layer for the change in return loss, and the polynomial has a very high prediction suitability as RSS = 1.4751, R² = 0.9988246, P-value = 0.0001841.

• Korean Journal of Microbiology
• /
• v.48 no.4
• /
• pp.319-324
• /
• 2012

In this study, we investigated molecular divergences and phylogenetic characteristics of the 16S ribosomal RNA (rRNA) and RNA polymerase beta subunit (rpoB) gene sequences from the order Oscillatoriales (Cyanobacteria). The rpoB of Oscillatoriales showed higher genetic divergence when compared with those of 16S rRNA (p-distance: rpoB=0.270, 16S=0.109), and these differences were statistically significant (Student t-test, p<0.001). Phylogenetic trees of 16S rRNA and rpoB were generally compatible; however, rpoB tree clearly separated the compared Oscillatoriales taxa, with higher phylogenetic resolution. In addition, parsimony analyses showed that rpoB gene evolved 2.40-fold faster than 16S rRNA. These results suggest that the rpoB is a useful gene for the molecular phylogenetics and species discrimination in the order Oscillatoriales.

• Journal of Ginseng Research
• /
• v.46 no.6
• /
• pp.731-737
• /
• 2022

Background: The number of primary human immunodeficiency virus (HIV)-1 non-B subtype infections (non-B) and that of reports regarding the differences in the pathogenesis of subtype B and non-B infections are increasing. However, to the best of our knowledge, there have been no reports on gross deletion in the nef gene (g∆nef) in non-B infections. Methods: To determine whether there is a difference in the change in CD4⁺ T cells after treatment with Korean Red Ginseng (KRG) between patients with subtype B and non-B infections, we retrospectively analyzed and compared the annual decrease in CD4⁺ T cells (AD) and the proportion of g∆nef in 77 patients who were followed for more than 10 years in the absence of combination antiretroviral therapy. Results: Overall, AD was significantly faster in patients with non-B infections than in those with subtype B infections. Survival analysis showed that the survival probability was significantly higher in subtype B than in non B-infected patients. These differences mainly resulted from significant differences in the amount of KRG and age. In the patients treated with KRG, there was a significant correlation between the amount of KRG and the AD in both subtypes. Interestingly, there was a significant correlation between the amount of KRG and the proportion of g∆nef in patients infected with subtype B, but not in those infected with non-B. The same phenomenon was observed when the KRG dose was adjusted. Conclusion: Our results suggest that non-B may be biologically more stable than subtype B.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.143-150
• /
• 2018

This work conducted the experimental analysis on ultrasonic acoustic matching in order to measure the accuracy of gaseous fuel level values. The experimental devices were used as 12V-DC supply, control T1 board, oscilloscope (DS01072B), ultrasonic probe and pattern table. The research models were designed by ceramic assay which can determine the transmitting and receiving energies. The result of the ringing area could verify the increased characteristics in the order of D (0.180m) < E (0.184m) < B (0.204m) < A (0.234m) < F (0.244m) < C (0.247m) models based on initial 2.9V of the maximum peak voltage. From the experimental results, the model designed by Ø21*3+2t of the matching layer was notable in that the most outstanding directivity energy could be created.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.7
• /
• pp.462-469
• /
• 2015

This study was carried out to examine characteristics of various acoustic indicators evaluating speech intelligibility such as reverberation time(T₃₀), D₅₀, C₅₀ and speech transmission index(STI) in Korean elementary school classrooms. Results showed that mean T₃₀ at middle frequencies(500 Hz to 2000 Hz) measured in 9 classrooms was about 0.75 s, which exceeds a regulation specified on American National Standards(ANSI); 0.60 s. Mean D₅₀, C₅₀ and STI were 60 % to 66 %, +2 dB to +3 dB, and 0.65, respectively. The maximum difference in D₅₀ and C₅₀ according to different receiver points in a classroom was 13 % and 2.5 dB, while the maximum difference in T₃₀ was 0.03 s. Whereas STI measured in classrooms has relatively low correlation with other indicators, correlation between D₅₀ and C₅₀ was high, R²=.9964. In addition, T₃₀ and C₅₀ were fitted well as logarithmic regression curve with R²=.9610. It was +3.73 dB in C₅₀ and 68 % in D₅₀ which are the value corresponding to 0.60 s in T₃₀ on this curve.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.390-396
• /
• 2021

In this research, design and fabrication of marine repeater capable to extend communication coverage in monitoring system of fishing gear automatic identification, which is one of implementation method of the real-name electric fishing gear system declared by Ministry of Oceans and Fisheries in 2016, is reported. The proposed marine repeater is fabricated in a form of RF repeater with interference cancellation system (ICS), which can cancel the oscillation due to feedback signal between service antenna and link antenna. In design process, we secure the isolation of 30 dB between service antenna and link antenna. It is confirmed that when the level of feedback signal into repeater input be lower of 15 dB than repeater gain, error vector magnitude due to oscillation can be lower than the performance criterion of 6%, from the test verification. It is expected that the service coverage will be extended by applying the developed marine ICS RF repeater into marine IoT network including monitoring system of fishing gear automatic identification.