• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.13-19
• /
• 1998

It was shown that the bandwidth of T-shaped microstripline fed slot antenna is wider than many of the conventional feeding structures. In this paper, we proposed a new method of enhancing the bandwidth of T-shaped microstripline fed slot antenna with a shunt open stub, and analyzed this antenna by using the FDTD method. We have computed waves and electric field distribution in the time domain, and VSWR, input impedance and radiation pattern in the frequency domaim by Fourier transforming the time domain results. It was found that the bandwidth of this antenna depend on the position(L$_1$) and length(L$_2$) of a shunt open stub. When these parameters are L$_1$=30 mm and L$_2$=33mm, we obtained the maximum bandwidth at the center frequency of 2.3 GHz. From the computed results, the optimum antenna is designed and fabricated. The fractional bandwidth of this antenna was 53.9 %. The measured results were in relatively good accordance with computed values.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.289-292
• /
• 2009

In this paper, an optimum design center frequency proposes portable RFID reader antenna that is 920MHz frequency using the Taguchi's Method. Proposed antenna is cut corner of opposite angle and it's structure that have slots in four sides microstrip patch of a perfect square shape. This slot structure can miniaturize microstrip patch antenna and confirmed through an experiment that size of antenna about 18% decreases than structure that slot does not exist. Because compact antenna that have structure of slot changes according to complex design variables, analysis and experimental design for minimization of experiment number of times are required for optimum antenna design. In this research, designed antenna that have optimum structure when introduce and designs table of orthogonal arrays of the Taguchi's Method been experimental design that can minimize analysis and experiment number of times, achieve responsiveness analysis of main elements and analyzes the effect and minimizes design repeat with analysis result. Presented experiment result about antenna special quality that permittivity is 4.4 and manufactures to board of Epoxy 3.2T.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.298-304
• /
• 2012

The shielded slot plates for a molten carbonate fuel cell(MCFC) have a sheared corrugated trapezoidal pattern. In the FEM simulations for the production of the shielded slot plate, the user material subroutine VUMAT in the commercial FEM software ABAQUS was used to implement a ductile fracture criterion. The critical damage value for the ductile fracture criterion was determined by comparing the experimental results of the shearing process with the simulation results. Using the ductile fracture criterion, the FEM simulation of the three-dimensional forming process of the shielded slot plate was conducted. The effects of the shearing process on the forming process were examined through FEM simulation and experiments. The forming simulation of nine unit cells was conducted. Using the simulation results of the forming process, the deformed shape after springback was calculated. The experimental result shows good agreement with the simulation.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.150-152
• /
• 1994

In this paper, the optimum shape design of stator slot of induction motors for iron loss reduction is proposed. To obtain the flux distribution in induction motors, 2-D finite element method with voltage source is employed. The iron loss is calculated from the iron loss data given by the iron manufacturer. To calculate the sensitivity of iron loss to shape variation, the sensitivity analysis of discrete approach is used. The proposed algorithm is applied to a 3-phase squirrel cage induction motor. The nodes at stator slot boundary of the induction motor are defined as design parameters. By controlling these parameters under the constant volume of iron, we can minimize the iron loss. Furthermore, the stator copper loss is reduced by increasing the slot area. So the stator slot area is determined at the point that the summation of iron loss and copper loss of stator is minimized. Since the constraint of constant volume of iron is nonlinear to the design parameters, the Gradient Projection method is used as an optimization algorithm.

• Journal of Biosystems Engineering
• /
• v.14 no.2
• /
• pp.123-127
• /
• 1989

축사나 환기시스템은 슬롯 환기시스템(slot-ventilation systems)으로 설치되어 있는 경우가 많으며, 이의 공기 유동(流動)을 2차원으로 해석할 수 있다. 직사각형 슬롯 환기 밀폐공간의 공기혼합 형태와 속도분포의 추정을 위해서 K-E 난류 전이모형을 기초로 한 TEACH-T 프로그램을 변형, 적용하였다. 이 모형을 이용하여 얻은 기류분포 형태는 실측한 기류분포 형태와 매우 잘 맞았으며 추정한 공기속도의 크기는 비교적 잘 맞는 편이었다. 그러므로 TEACH-T 프로그램을 변형해서 환기시스템 설계의 기초자료가 되는 여러 형태의 슬롯 밀폐공간의 공기분포와 공기속도의 크기를 추정하는데 TEACH-T 프로그램을 변형해서 적용시킬 수 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.32-37
• /
• 2000

We proposed to a new method of the aperture coupled microstrip antenna with T-shaped feeding slot. We analyzed method of enhancing the bandwidth of the antenna using FDTD. And the antenna parameters are optimized to get maximum bandwidth. We also calculated the progress process of waves and the distribution of electric field in the time domain. We also calculated return loss, VSWR, input impedance, radiation pattern in the frequency domain by Fourier transforming the time domain results, respectively. It was found that the bandwidth of this antenna changes length and width of the patch, length and width of the slot, length of T-shaped feedline, position of the offset. Measured % bandwidth was 49.2 % in the center frequency 2.5 GHz. These results were in relatively food accordance with calculated values.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.559-560
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.819-820
• /
• 2009

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1672-1675
• /
• 2003

Microstrip antennas have many applications in wireless communication system. This paper propose a analytical far-field pattern of radiation for application of the wireless communication. The triangular slot antenna fed by micorstrip line is proposed at resonance frequency 10 GHz. The simulation results of the electromagnetic field radiation pattern, S parameter, characteristic of input impedance are obtain by using the finite difference time domain (FDTD) method. The analytical space in FDTD analysis are $50{\times}171{\times}120$ cells with the cell dimension ${\Delta}x=0.152\;mm$, ${\Delta}y={\Delta}z=0.15\;mm$.

• Journal of computational fluids engineering
• /
• v.6 no.2
• /
• pp.40-46
• /
• 2001

Two-dimensional steady flowfields generated by slot injection into supersonic flow are numerically simulated by the integration of Navier-stokes equation with two-equation κ-turbulence model. High-order upwind scheme is used on unstructured adaptive meshes. The numerical results are compared with experimental data in terms of surface static pressure distributions, the length of the upstream separation region, and the height of the Mach surface for steady flowfields with a Mach number of 3.71 and a unit Reynolds number of 5.83×10/sup 6//m.