• Smart Structures and Systems
• /
• v.10 no.4_5
• /
• pp.353-373
• /
• 2012

The instrumented Canton Tower is a 610 m high-rise structure, which has been considered as a benchmark problem for structural health monitoring (SHM) research. In this paper, an improved automatic modal identification method is presented based on a natural excitation technique in conjunction with the eigensystem realization algorithm (NExT/ERA). In the proposed modal identification method, damping ratio, consistent mode indicator from observability matrices (CMI_O) and modal amplitude coherence (MAC) are used as criteria to distinguish the physically true modes from spurious modes. Enhanced frequency domain decomposition (EFDD), the data-driven stochastic subspace identification method (SSI-DATA) and the proposed method are respectively applied to extract the modal parameters of the Canton Tower under different environmental conditions. Results of modal parameter identification based on output-only measurements are presented and discussed. User-selected parameters used in those methods are suggested and discussed. Furthermore, the effect of environmental conditions on the dynamic characteristics of Canton tower is investigated.

• Earthquakes and Structures
• /
• v.11 no.4
• /
• pp.665-680
• /
• 2016

This paper focuses on the study of seismic behavior of steel reinforced concrete special-shaped column-beam joints. Six specimens, which are designed according to the principle of strong-member and weak-joint core, are tested under low cyclic reversed load. Key parameters include the steel form in column section and the ratio of column limb height to thickness. The failure mode, load-displacement curves, ductility, stiffness degradations, energy dissipation capacity and shear deformation of joint core of the test subassemblies are analyzed. The results indicate that SRC special-shaped column-beam joints have good seismic behavior. All specimens failed due to the shear failure of the joint core, and the failure degree between the two sides of joint core is similar for the exterior joint but different for the corner joint. Compared to the joints with channel steel truss, the joints with solid web steel skeleton illustrate better ductility and energy dissipation capacity, but the loading capacity and stiffness are roughly close. With the increasing of the ratio of column limb height to thickness, the joints illustrate higher loading capacity and stiffness, better energy dissipation capacity, but worse ductility.

• Computers and Concrete
• /
• v.11 no.1
• /
• pp.1-20
• /
• 2013

There is an abundance of research on the strengthening of reinforced concrete (RC) structural elements such as beams, columns and slabs with fibre reinforced polymer (FRP) composites. Less research by comparison has been conducted on the strengthening of RC beam-column connections and the majority of such research has been predominantly experimental to date. Few existing experimental studies have reported extensive instrumentation of test specimens which in turn makes understanding the behavior of the connections and especially the contributions made by the FRP difficult to ascertain. In addition, there has been even more limited research on the analytical and numerical modelling of FRP-strengthened connections. In this paper, detailed descriptions of key strategies to model FRP-strengthened RC connections with finite elements are provided. An extensively instrumented and comprehensively documented set of experiments on FRP-strengthened connections is firstly presented and finite element models are then constructed using ANSYS. The study shows that the finite element approach is able to capture the overall behavior of the test specimens including the failure mode as well as the behavior of the FRP which will most importantly lead to a detailed understanding of the FRP and the future development of rational analytical models. The finite element models are, however, unable to model the stiffness of the connections with accuracy in the ultimate load range of response.

• Steel and Composite Structures
• /
• v.19 no.4
• /
• pp.877-895
• /
• 2015

Connections to circular hollow steel sections (CHS) are considered one of the most complex and time consuming connections in steel construction. Such connections are usually composed of gusset plates welded to the outside of the steel tube or penetrating the steel tube. Design guides, accounting for the effect of connection configuration on the strength of the connection, are not present. This study aims to investigate, through experimental testing and a parametric study, the influence of connection configuration on the strength of one sided branch plate-to-CHS members. A notable effect was observed on the behavior of the connections due to its detailing changes with respect to capacity, failure mode, ductility, and stress distribution. A parametric study is performed using the calibrated analytical model to include a wider range of parameters. The study involves 26 numerical analyses of finite element models including parameters of the diameter-to-thickness (D/t) ratio, length of gusset plate, and connection configuration. Accordingly, a modification to the formulas provided by the current design recommendations was suggested to include connection configuration effects for the one sided branch plate-to-CHS members.

• Journal of Nutrition and Health
• /
• v.10 no.4
• /
• pp.19-23
• /
• 1977

It is said that a mode of dietary behavior changes together with socioeconomic and cultural transformation. Formation of dietary habit of pre-school children influences upon direction of this changes, specially. So, this study was planned to analyst the dietary pattern of pre-school children. A survey was carried out for 3 days of 28 pre-school children with a mean age of 4 years and 3 months. Each child's matter wrote dietary pattern and kinds of food as staple, subsidiary and snack. The results showed that; (1) the average meal frequency a day was 3.1 and interval between meal was 5.1 hours (for breakfast to lunch & lunch to supper) and 12.6 hours (for supper to breakfast), (2) there were 27 different kinds of foods as staple and cereal products consumed the most among those, and 82 different kinds of foods as subsidiary and KIMCHI products were eaten the most rating, (3) the average snack frequency a day was 5.0. There were 76 different kinds of foods as snack, among them cold drink was the best. The present observation suggested that pre-school children had a tendency to take meat regularly, but snack very irregularly, and kinds of foods taken as staple, subsidiary and snack didn't keep the nutritional balance. Parent's concern about dietary behavior of their children is demanded more than ever.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.62-66
• /
• 2015

This paper introduces various applications and contents of digital signage, and analyzes conventional communication techniques to increase communication range. To realize digital signage in long distance, this paper proposes a hybrid modulation scheme and analyzes its performance. To verify its performance in real channel environment, we mapped symbols and experimented data transmission and reception with a visible light communication module with USRP. As a result, we confirmed a data receiving range and power of transmission and reception of the hybrid modulation mode. Also, we showed that the proposed modulation scheme has better performance of communication range and power efficiency than that of the conventional QAM technique.

• The Korean Journal of Physiology
• /
• v.10 no.2
• /
• pp.23-28
• /
• 1976

Author have already reported that urinary aldosterone excretion of the Korean who usually eat high sodium diet is significantly lower comparing with the American, although the plasma aldosterone concentration is identical in the former with that of the latter. Measurement of urinary aldosterone excretion and Plasma concentration only is insufficient to establish the pressence and/or mode of evolution of the Korean. In this experiments, aldosterone secretion rate(ASR) was measured in normotensive Korean during high and low dietary sodium intake with or without additional potassium supply. Results were as follows; 1) In normal Korean, dietary sodium restriction resulted in appreciable increase in ASR, and a sustained increase in urinary aldosterone excretion with an increase in plasma level. 2) Oral potassium loading easily stimulated the adrenal cortex of the Korean who already adapted to a high sodium diet when dietary sodium is still identical with not·mal American. 3) Quantitative relationships between aldosterone secretion rate, plasma concentration and urinary excretion of aldosterone were altered by potassium loading. 4) Urinary aldosterone excretion didn't reflect concurrent increase aldosterone secretion in subjects with Potassium intake. It was discussed that the changes of tile relationships and of adrenal hyper response on Potassium Beading in the Korean will be elucidated by measuring the metabolic clearance rate.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3078-3087
• /
• 1997

The information security is very important in computer communication network, and the security system has been developed in many aspects to provide secure communication. The secret key distribution and mutual user authentication are essential element in designing security system, then many algorithms and implementation schemes have been proposed. But they don't consider communication protocol, so they are not easy to adapt a real communication network' In this paper, we propose a key distriburion and mutual user authentication scheme based on X.25 protocol which is the most popular in packet communication, and the proposed scheme maintains a protocol transparency and can select communication mode, so the security system is more capable.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.6
• /
• pp.286-292
• /
• 2005

Terahertz wave is a kind of electromagnetic radiation whose frequency lies in 0.1THz $\~$10THz range. In this paper, generation and detection characteristics of terahertz (THz) radiation by photoconductive antenna (PCA) method has been described. Using modern integrated circuit techniques, micron-sized dipole antenna has been fabricated on a low-temperature grown GaAs (LT-GaAs) wafer. A mode-locked Ti:Sapphire femtosecond laser beam is guided and focused onto photoconductive antennas (emitter and detector) to generate and measure THz pulses. Ultra-wide band THz radiation with frequencies between 0.1 THz and 3 THz was observed. Terahertz field amplitude variation with antenna bias voltage, pump laser power, pump laser wavelength and probe laser power was investigated. As a primary application example. a live clover leaf was imaged with the terahertz radiation.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.373-377
• /
• 1999

HTS magnet operated at 20${\sim}$40 K was fabricated using three pieces of 100 m Bi-2223 high temperature superconductors fabricated by powder-in-tube process. It was composed of 6 double pancakes with 75 ID. and 113 OD. connected by lab splice. Coil I$_c$ of each DP.(double pancake) obtained for a 140 turn, fabricated using react and wind procedure was 6${\sim}$8 A at 77 K, self field. The maximum field was measured 0.06 T at lop = 5 A, 77 K. The joint resistance due to lap splice of HTS tapes affect badly to operate HTS magnet with persistent current mode, total effective magnet resistance included lap splice was 55 ${\mu}$ ${\omega}$ at 77 K.