• 한국터널지하공간학회 논문집
• /
• 제6권4호
• /
• pp.345-356
• /
• 2004

지하구조물을 축조하는 공법으로 기존에 가장 많이 사용해 온 것이 개착식 공법이나, 지상교통 흐름을 방해하고 공사소음 및 주변 지반의 침하로 인한 민원 발생 등 많은 문제점을 야기해 왔다. 많은 경우에 있어 지중에 매설된 상수도관 하수도관 도시가스관 고압 전력구 통신 케이블 등 지중 매설물의 위치가 정확하게 파악되지 않아서 안전한 시공에 어려움이 크고, 개착공사 시 지하지장물의 이설로 인한 공지지연 및 추가공사비가 소요될 것으로 판단되다. 따라서 본 논문에서는 기존 지하구조물 축조공법을 개선하여 슬래브강관과 PC벽체 트렌치를 이용한 터널축조공법 (T.R.c.M.)을 서울지하철 현장에 적용한 시공사례를 소개하고자 한다. 연구결과, T.R.c.M.공법은 진동과 소음을 최소화하여 주변환경과 교통의 흐름에 전혀 지장을 주지 않고 안정적으로 터널을 축조할 수 있는 공법임을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제9권2호
• /
• pp.94-98
• /
• 1988

An improvement over the method of pore size distribution analysis has been made in this work. The improved method is based upon the idea of the micro pore analysis of Mikhail, Brunauer, and Bodor, and utilizes the V-t curve of nitrogen adsorption. Two pore models are assumed, and the deviation of the initial slope of the V-t plot is ascribed to the pore filling and to the adsorption on the wall of unfilled pores. The improved method of this work is very convenient in that the analysis starts from the small pore regions. The method of this work is however quite distinct from the similar V-t plot method proposed by Sellevold and Radjy. The proposed method is applied to a few adsorbents, and very satisfactory results are obtained. The cumulative surface area calculated by this method also agrees very well with those obtained by the BET plot or by the t-method.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1120-1124
• /
• 2013

Our objective of this study was to reduce radio frequency coil (RF) control time at 3 T MRI systems. A compressed method is proposed with a convex optimization and pseudo-inverse method in multi-channel RF coils. After applying the proposed methods, fields are homogenized with less field data. Even with 80% compression, the fields are well homogenized and localized, indicating that mapping requires only 20% of the original data. Detailed values are compared between each compressed result in and outside the region of interest at 3 T.

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.101-107
• /
• 2001

This paper describes a fault diagnosis method by a T-invariance of Petri Net (PN). First, a complicated fault system with some failure is modeled into a PN graphic expressions. Next, the PN model is analyzed by using the backward chaining of T-invariance to find out causes of the faults. In this step, an inter-node search technique which is suggested in this paper is applied for reducing searching area in the fault system. Also, a novel idea to compose incidence matrices which have different dimension each other in PN model is proposed. As the new knowledges which is discovered newly about faults can be added easily to conventional systems, the diagnosis system will be very flexible. Finally, the proposed method is applied to the automobile fault diagnosis system to confirm the validity of the method.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1839-1849
• /
• 1989

An optimal variable assignment algorithm is presented as a decomposition method of MVL functions. A given 3-valued combinational logic function is disintegrated into subfunction composed of the function dependant relation, then extracted implicant output elements from subfunctions are assigned to a T-gates. As a circuit implementation tool, a programmable integarated T-gate module is proposed, and the construction procedure of combinational MVL functions is systematized in each step. This method is expected to give properties of the systematic procedure, possibility of T-gate number reduction, unification of module, and flexibility of module composition. Specially variable decomposition method can be pointed out as an approach to solving the limitation problem of the input and output terminal number in VLSI implementations.

• International Journal of Computer Science & Network Security
• /
• 제21권6호
• /
• pp.119-126
• /
• 2021

The Internet of Things (IoT) applications are quickly spread in many fields. Blockchain methods (BC), defined as a distributed sharing mechanism, offer excellent support for IoT evolution. The BC provides a secure way for communication between IoT devices. However, the IoT environments are threatened by hacker attacks and malicious intrusions. The IoT applications security are faced with three challenges: intrusions and attacks detection, secure communication, and compressed storage information. This paper proposed a system based on double-blockchain to improve the communication transactions' safety and enhance the information compression method for the stored data. Information security is enhanced by using an Ellipse Curve Cryptography (ECC) considered in a double-blockchain case. The data compression is ensured by the Compressed Sensing (CS) method. The conducted experimentation reveals that the proposed method is more accurate in security and storage performance than previous related works.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.570-575
• /
• 2002

It is well-known that the bond strength between CFRP(Carbon Fiber Reinforced Plastic) and aluminum is significantly affected by the surface treatment of the CFRP and the aluminum. This study investigates the surface treatment of CFRP to improve the T-peel strength of CFRP/aluminum composites. The surface of %CFRP([0^0]_{14})$ was treated by the ion assisted reaction method under oxygen environment. T-peel strength tests were performed based on the procedure of ASTM D1876-95. The T-peel strength of surface-treated CFRP/aluminum composites was compared with that of untreated CFRP/aluminum composites. The results showed that the T-peel strength of surface-treated CFRP/aluminum composites was about 5.5 times higher than that of untreated CFRP/aluminum composites. SEM examination showed that the improvement of T-peel strength was attributed to the uniform spread and fracture of epoxy adhesive.

• 방송공학회논문지
• /
• 제27권5호
• /
• pp.762-772
• /
• 2022

이동통신 시스템 기반의 현 재난경보 방송1)은 스마트폰 등 개인 휴대 단말기를 대상으로 한다. 그러나 스마트 시티는 스마트 홈, 스마트 오피스 등 IoT 기반의 서비스를 필수로 한다. 따라서 지진 등 심각한 재난이 발생하면 스마트 시티는 건물, 공장 등에 적절한 제어 및 대응을 신속히 수행할 필요가 있다. 이를 위해 스마트 시티 용 IoT 단말기를 위한 재난경보 방송 기법이 필요하다. 본 논문에서는 스마트 시티 용 IoT 단말기를 위한 4G/5G 이동통신 기반의 재난경보 전송기법을 제안한다. 제안된 기법은 셀 기반 방송 서비스인 CBS를 위한 이미지 표출방식을 효과적으로 활용하며 모의실험을 통해 제안된 기법의 우수성을 보여준다.

• Weed & Turfgrass Science
• /
• 제7권2호
• /
• pp.120-129
• /
• 2018

This experiment was conducted to find the most suitable crop establishment method and weed management practices for transplanted aman rice in Bangladesh. Rice variety Bangladesh Rice Research Institute (BRRI) dhan44 was used as planting materials where three crop establishment methods ($T_1$: direct wet seeding by drum seeder; $T_2$: hand broadcasting; $T_3$: transplanting) and four weeding options ($W_1$: Hand weeding (HW); $W_2$: BRRI weeder+HW; $W_3$: Herbicide+HW; and $W_4$: no weeding) were tested. Among the crop establishment methods, the highest grain yield ($5.12t\;ha^{-1}$) was obtained with the $T_3$, while the highest benefit cost ratio (BCR) of 2.08 was found in $T_2$. In case of the weed management method, $W_1$ showed superior results on the plant $density/m^2$ (139.66) at 60 days after transplanting (DAT), grain yield ($4.97t\;ha^{-1}$), and BCR (2.03). On the other hand, the highest plant dry matter (36.20 g) at 60 DAT and the highest yield ($6.10t\;ha^{-1}$) were obtained in a $T_3W_1$ combination. The results of this study show that the productivity of rice during aman season could be most significantly increased with the use of transplanting ($T_3$) alone, hand weeding ($W_1$) alone, or a combination of the two methods ($T_3W_1$).

• 한국항공우주학회지
• /
• 제40권9호
• /
• pp.827-832
• /
• 2012

본 논문에서는 저궤도 위성의 반작용 휠 속도 측정을 위해 M-방식과 T-방식 모두 검출가능한 보드를 설계하여 두 방식의 장점을 이용할 수 있도록 하고, 실제 위성탑재컴퓨터에 장착하여 시험을 수행하고 이를 통하여 그 설계의 유용성을 검증한다. 위성에서 반작용 휠은 위성의 자세를 변화시킬 수 있는 대표적인 구동기의 하나로 반작용 휠 구동모터의 회전에 의해 발생하는 회전관성에 의해 자세 제어를 수행하게 된다. 반작용 휠의 회전속도를 검출하는 방법으로는 일정한 주기 T 동안 발생된 반작용 휠 내부 타코 펄스를 세어 휠의 속도를 검출하는 M-방식과 휠에서 발생되는 타코 펄스들 간의 시간을 측정해서 속도를 검출하는 T-방식으로 나눌 수 있다. M-방식은 구현이 간단하고 측정 시간이 일정하다는 장점이 있으나, 저속에서는 속도 측정 분해능이 떨어진다는 단점이 있다. 그에 반해, 타코 펄스간의 시간을 측정하는 T-방식은 저속에서 정밀한 속도를 측정할 수 있으며 측정에 따른 시간 지연이 작다는 장점이 있다. 그러나 이 방법 역시 실제 구현에 있어서 연산이 복잡하고 속도에 따라 연산 속도가 달라진다는 단점이 있다.