• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.131-138
• /
• 2011

This study was carried out to investigate on the composting characteristics variation accoding to air supply capacity in Pig manure. The composting of pig manure is economical and efficiently process. The fermented compost was added in pig manure mixed with sawdust was composting reators. Air supply capacity levels of fermented compost on the pig manure mixed with sawdust were regulated at 50, 100, 150 and 200$\ell/m^3$/min. respectively. The obtained results can be followed as bellow; The temperature variations of experimental composting piles during composting for the different of T-1 reach $40^{\circ}C$ in 2 days, T-2, T-3 and T-4 reach $60^{\circ}C$ in 2 days and T-3, T-4 maintained until 8 days. The decreases in water contents per each square meter for the different of T-1 (50 l/$m^3$/min), T-2(100 l/$m^3$/min), T-3(150 l/$m^3$/min) and T-4(200 l/$m^3$/min.), The decreases ratio in water contents was T-1, T-2, T-3 and T-4 were 15.4%, 28.8%, 33.4% and 35.2%. The decreases ratio in weight was T-1, T-2, T-3 and T-4 were 7.6%, 15.6%, 16.8% and 16.9% respectively. The variations of oxygen concentration from composting period in case of oxygen discharge concentration T-1, T-2, T-3 and T-4 were 9 ppm. respectively. Fertilizer components after composting were examined. Nitrogen contents of the T-1, T-2, T-3 and T-4 were 0.45%, 0.44%, 0.42% and 0.44%, and P2O5 contents were T-1, T-2, T-3 and T-4 were 0.37%, 0.41%, 0.42% and 0.44% respectively. Therefore, the compost curing air supply of air volumes at least 150$\ell$/min/min. or more to supply the aerobic composting pig manure normally are judged to be possible.

• Journal of the Chungcheong Mathematical Society
• /
• v.29 no.1
• /
• pp.1-11
• /
• 2016

This paper shows that the solutions to nonlinear perturbed functional differential system $$y^{\prime}=f(t,y)+{\int}^t_{t_0}g(s,y(s),Ty(s))ds+h(t,y(t))$$ have the asymptotic property by imposing conditions on the perturbed part ${\int}^t_{t_0}g(s,y(s),Ty(s))ds,h(t,y(t))$ and on the fundamental matrix of the unperturbed system y' = f(t, y).

• Investigative Magnetic Resonance Imaging
• /
• v.19 no.1
• /
• pp.31-36
• /
• 2015

Purpose: To compare the depiction of brain metastases on contrast-enhanced images with 7.0 tesla (T) and at 1.5T MRI. Materials and Methods: Four consecutive patients with brain metastases were scanned on 7.0T whole-body scanner and 1.5T MRI. A 3D T1-weighted gradient echo sequence (3D T1-GRE) at 1.5T (voxel size = $0.9{\times}0.9{\times}1.5mm^3$ after double-dose, gadoterate meglumine, Gd-DOTA) was compared to a 7.0T 3D T1-GRE sequence (voxel size = $0.4{\times}0.4{\times}0.8mm^3$, single-dose Gd-DOTA) in four patients after a 5 minute delay. The number of contrast-enhancing metastases in MPRAGE images was compared in each patient by two radiologists in consensus. We measured contrast ratio of enhancing brain metastases and white matter in 1.5T and 7.0T. Results: In all four patients 7.0T 3D T1-GRE images after single-dose Gd-DOTA and 1.5T after double-dose Gd-DOTA depicted 11 brain metastases equally. In the quantitative analysis of contrast ratios of enhancing brain metastases and white matter, the 1.5T 3D T1-GRE after double-dose showed an increased contrast ratio compared to 7.0T 3D T1-GRE after single-dose ($0.961{\pm}0.571$ versus $0.885{\pm}0.494$; n = 11 metastases). But this difference was not statistically significant (P = 0.711). Conclusion: Our preliminary results indicate that 7.0T single-dose Gd-enhanced images were not different to 1.5T double-dose Gd-enhanced images for the detection of brain metastases.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.52-55
• /
• 1994

The proton and deuteron spin-lattice relaxation times, $T_{1}(H)$ and $T_{1}(D)$, have been measured in HD between 30 K and 313 K in the pressure of 0.67 - 1.92 atm. The nuclear magnetic resonance frequencies are respectively 358.012 MHz for a proton and 58.958 MHz for a deuteron. From the measurements of $T_{1}(H)$ and $T_{1}(D)$ the ratio of the correlation times ${\tau}_{1}\;and\;{\tau}_{2}$ that are associated with the molecular angular momentum operators was obtained. The nuclear spin-lattice relaxation time at J = 1 state has been observed to have a temperature dependence being proportional to $T^{0.25}$.

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.131-138
• /
• 2020

The aim of this study was to evaluate the effect of aflatoxin B₁ (AFB₁) on in vitro rumen fermentation at various dose levels of 0 (T₁), 100 (T₂), 200 (T₃), and 300 (T₄) ppb in a wheat straw-based buffalo diet. The results show that the truly degradable dry matter, truly degradable organic matter, gas production, microbial biomass production and partitioning factor values in the control group (T₁) were higher (p < 0.05) than those of the T₂, T₃, and T₄ groups. The total volatile fatty acids, acetate, propionate, and butyrate values in the control group (T₁) were higher (p < 0.05) than those of the T₂, T₃, and T₄ groups. The partitioning factor value in the control group (T₁) was higher (p < 0.05) than those of the T₂, T₃, and T₄ groups. The partitioning factor values of the T₂ and T₃ groups were higher (p < 0.05) than that of the T₄ group. There was no significant variation in the partitioning factor value between the T₂ and T₃ group. The acetate : propionate (A : P) ratio in the control group (T₁) was lower (p < 0.05) than those of the T₂, T₃, and T₄ groups. The A : P ratio in the T₂ group was lower (p < 0.05) than those of the T₃ and T₄ groups. It was concluded that different levels of AFB₁ contamination in feed significantly affect the in vitro rumen fermentation characteristics. Thus, these findings could help to determine the influences of AFB₁ in a wheat straw-based buffalo diet. Additionally, it is necessary to manage AFB₁ contamination in ruminants.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.97-98
• /
• 2001

In Experiment 1, two hundred ten hatched broiler chickens(Ross) were assigned to seven dietary treatments for 5weeks. Each treatment was consisted of 3 replications with 10 birds per replication. Control diet was formulated 22%CP and 3,150kcaIME/kg for starter diet, 19%CP, 3,200kca1ME/kg for finisher diet. Euglena gracilis was added to control diet at the level of 0.25, 0.5, 1.0% and Euglena bleached(DHA enriched) at the level of 0.5, 1.0, 2.0% in the diet. 0 Experiment 2, two hundred fifty hatched broiler chickens(Ross) were assigned to five dietary treatments: T1; control, T2: T1 + Euglena gracilis(DHA enriched)0.5%, T3; T1 + Euglena gracilis(DHA enriched)1.0%, T4: T1 + Euglena bleached(DHA enriched)0.5%,T5: T1 $.$Euglena bleached(DHA enriched)1.0%. In Experiment 1, 2.0% Euglena bleached treatment showed highest DHA level in breast muscle(P<0.05), In Experiment 2, 1.0% Euglena bleached treatment showed highest EPA, Lignoceric acid and DHA level in breast muscle(P<0.05).

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.68-73
• /
• 2012

Nowadays, car manufacturers tried to improve automotive fuel efficiency, and applied many high strength steels such as AHSS or UHSS to car bodies. Therefore, the number of steel combinations for the resistance spot welding are dramatically increased and the need for weldability evaluation of these combinations are also required. In this study, we suggest the lobe curve using FEM simulations for DP780 steel with 1.0t, 1.4t. The lobe curves which could expressed weldablity and optimal welding condition were obtained according to 6 steel combinations. There were two combinations for same steel sheet which were DP780 1.0t, DP780 1.4t. Dissimilar steel sheet combination with different thickness was 1.0t and 1.4t of DP780. Different steel combinations were DP780 1.0t and SPRC440 1.0t, and DP780 1.0t and DP590 1.0t. Finally dissimilar combinations was and DP780 1.0t and DP590 1.4t. The trend of low boundary and high boundary variation of lobe curve were analyzed with a viewpoint of the contact resistance and the heat input.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.861-870
• /
• 2006

This study was conducted to examine the effects of supplementing coated vitamin C+E with cottonseed on rumen fermentation and body weight gain, blood metabolites and hormone concentrations in Hanwoo steers fed fermented feedstuff. Experiments were done with two treatment groups, T1 without any supplements and T2 supplemented with coated vitamin C+E and cottonseed. Ruminal pH was lower in T2 than in T1 at 3h after morning feeding (p<0.05), but was higher in T2 than in T1 at 6 and 9h after morning feeding (p<0.05). Ruminal ammonia concentration was higher in T2 than in T1 for 12h after morning feeding (p<0.05). Concentrations of acetate, propionate, butyrate and total-VFA were higher in T2 than in T1 at 3h after morning feeding (p<0.05), but were lower in T2 than in T1 at 9 and 12h after morning feeding (p<0.05). Average daily gain and concentrations of blood metabolites and hormones between T1 and T2 were similar. Results indicate that supplementation of coated vitamin C+E and cottonseed to fermented feedstuff affects on ruminal pH, ammonia and VFA. But it has no influences on body weight gain and concentrations of blood metabolites and hormones in Hanwoo steers.

• Journal of radiological science and technology
• /
• v.26 no.2
• /
• pp.57-61
• /
• 2003

The purpose of this study is to compare both 1.5T and 4.7T in Praietal White matter material Phantom using the same methodology at both field strengths. Data at both field strengths are compared in terms of $T_2$ relaxation times, line widths and SNRs MR imaging and $^1H$ MR spectroscopy were performed on GE 1.5T SIGNA system and Broker Biospec 4.7T/30 MRI/MRS system. After phantom axial scan $^1H$ MRS was obtained from T2 weighted image by 3-dimensional localization technique(PRESS : Point RE solved spectroscopy Sequence) this phantom is composed of an aqueous solution 36.7 mmol/L of NAA, 25.0 mmol/L of Cr, 6.3 mmol/L of choline chloride, 30.0 mmol/L or Glu, and 22.5 mmol/L of MI(adjusted to a pH of 7,15 in a phosphate buffet). Data processed using software developed inhouse. At 1.5T, T2 relaxation times for Cho, Cr, and NAA were $0.41{\pm}0.07,\;0.26{\pm}0.04,\;0.46{\pm}0.07$ while at 4.7T they were $0.17{\pm}0.03,\;0.14{\pm}0.05,\;0.20{\pm}0.03$ respectively. At 1.5T, line widths for water, Cho, Cr and NAA were $2.9{\pm}0.7,\;1.6{\pm}0.7,\;1.7{\pm}0.8,\;2.2{\pm}0.02Hz$ while at 4.7T they were $5.2{\pm}1.1,\;4.6{\pm}1.9,\;4.01{\pm}1.8,\;4.8{\pm}1.9Hz$ respectively. It can be seen that $T_2$ relaxation times were significantly shorter at 4.7 compared to 1.5T and that the line widths were also broader. The average SNRs for NAA for subjects at short and long TEs were $23.5{\pm}11.3$ at TE=20 msec ; $15.4{\pm}7.7$ at TE=272 msec at 1.5T and $40{\pm}8.3$ and $17{\pm}3.5$ respectively at 4.7T higher field strength is superior because of improved sensitivity and chemical shift dispersion. However these improvements are partially offset by increased line widths and decrease $T_2$ relaxation times, which act to reduce both sensitivity and resolution. In our experiments with the equipment available to us, 4.7T proton spectra at short TEs exhibit moderately improved sensitivity compared to 1.5T.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.144-158
• /
• 1998

In order to study basic information on the developed electro-magnetic compass, experiments were carried out on board M. S. KAYA at the pier of Dong Kuk Steel Mill in Pusan and the Korean southern sea using a three-axis magnetic sensor from Jan. 21, 1995 to Feb. 14, 1996. The obtained results were as follows : 1. The amount of old metal on the pier was about 27,290tons~57,440tons with an average of 40,560tons, the artificial local disturbance at the pier was min. 27.1$\mu$T, max. 66.5$\mu$T, ave. 433$\mu$T for the horizontal component and min. -27.0$\mu$T, max. 45.1$\mu$T, ave. 3.7$\mu$T for the vertical component. Its direction of horizontal component was 305$^{\circ}$ with the ship's head up bearing at 225$^{\circ}$. 2. The ship's magnetic distribution on the starboard side on berthing at the pier was 17.4$\mu$T for the horizontal component and -6.2$\mu$T for the vertical component. On the ship's port side, it was 19.8$\mu$T for the horizontal component and 4.1$\mu$T for the vertical component. On the ship's starboard side at sea, the ship's magnetic distribution was 19.2$\mu$T for the horizontal component and 3.2$\mu$T for the vertical component. On the ship's port side, the readings were 22.0$\mu$T for the horizontal component and -1.8$\mu$T for the vertical component. The directions of these readings were nearly starboard side. 3. On the pier, the secular change of the artificial local disturbance decreased 8.3$\mu$T from 61.0$\mu$T to 52.7$\mu$T for the horizontal component and decreased 7.1$\mu$T from 8.9$\mu$T M 1.8$\mu$T for the vertical component. On the starboard side from its berth, the ship, s magnetic distribution increased 2.6$\mu$T from 14.8$\mu$T to 17.4$\mu$T for the horizontal component and increased -0.1$\mu$T from -6.1$\mu$T to -6.2$\mu$T for the vertical component. On the ship's port side from its berth, it increased 7.1$\mu$T from 12.7$\mu$T to 19.8$\mu$T for the horizontal component and increased 10.2$\mu$T from -6.1$\mu$T to 4.1$\mu$T for the vertical component. 4. While at sea, on the ship's starboard side, the Secular change of the ship's magnetic distribution increased 3.9$\mu$T from 15.3$\mu$T to 19.2$\mu$T for the horizontal component and increased 2.0$\mu$T from -5.2$\mu$T to -3.2$\mu$T for the vertical component. On the port side, the changes increased 11.4$\mu$T from 10.6$\mu$T to 22.0$\mu$T for the horizontal component and increased 4.9$\mu$T from -6.7$\mu$T to -1.8$\mu$T for the vertical component. Upon berthing at the pier, the deviation of the secular change increased westerly 1 degree W~ 2.5$^{\circ}$ W from 3.5$^{\circ}$ W~ 5$^{\circ}$ W M 6W with the ship's head up bearing at 225$^{\circ}$. While at sea, these increased westerly 2$^{\circ}$ ~ 3$^{\circ}$ from the Northeast to the South and increased easterly 1$^{\circ}$ ~ 8$^{\circ}$ from the Southwest to the North. 5. While at port, within 1 mile between the ship and berth of the pier, as we approached the pier, the westerly deviation increased and when we departed the pier easterly deviation increased. When approaching the pier, the deviation was smaller than the deviation when the ship was departing from the pier. When approaching the bearing at 225$^{\circ}$ with the ship's head up bearing, the varies of deviation was smaller than the varies when the ship's head up bearing was departing from it.