• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.560-567
• /
• 2006

FPSO and shuttle tanker are connected to each other by a mooring hawser and a loading hose through which cargo oil is off-loaded. Even in mild sea-state. environmental loads can cause unstable large drift motions between two vessels in tandem off-loading operations, which may result in collision incidents. Accordingly. the analysis on the relative motion between two vessels due to the environmental loads should be investigated in initial design stage. In this study, the low speed maneuvering equation is employed to simulate nonlinear motions of FPSO and shuttle tanker. Low frequency wave drift forces including hydrodynamic interactions between two vessels are evaluated by near field approaches. Current loads are determined by mathematical model of MMG and wind loads are calculated by employing the wind spectrum according to the guidelines of API-RP2A. Mooring forces produced by turret mooring lines and a flexible hawser are modeled quasi-statically by catenary equations. The effect of environmental loads that affect nonlinear motion is investigated through variation in their magnitudes and the nonlinear motions between FPSO and shuttle tanker are simulated under wave, current and wind in time domain.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.484-488
• /
• 2001

The grid voltage of commercial utility power source hi Japan and USA is 100rms, but in China and European countries, it is 200rms. In recent years, In Japan 200Vrms out putted single phase three wire system begins to be used for high power applications. In 100Vrms utility AC power applications and systems, an active voltage clamped quasi-resonant Inverter circuit topology using IGBTs has been effectively used so far for the consumer microwave oven. In this paper, presented is a half bridge type voltage-clamped high-frequency Inverter type AC-DC converter using which is designed for consumer magnetron drive used as the consumer microwave oven in 200V utility AC power system. This zero voltage soft switching Inverter can use the same power rated switching semiconductor devices and three-winding high frequency transformer as those of the active voltage clamped quasi-resonant Inverter using the IGBTs that has already been used for 100V utility AC power source. The operating performances of the voltage source single ended push pull type Inverter are evaluated and discussed for consumer microwave oven. The harmonic line current components In the utility AC power side of the AC-DC power converter operating at ZVS­PWM strategy reduced and improved on the basis of sine wave like pulse frequency modulation and sine wave like pulse width modulation for the utility AC voltage source.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.3
• /
• pp.151-156
• /
• 1994

Exertion has been made to develop high-temperature (about $250{\sim}650^{\circ}C$) immersion ultrasonic sensor for the visualization of objects, temperature measurement, dimensional check, or nondestructive testing of welds under liquid sodium. In this study, the feasibility of the ultrasonic sensor taking advantage of a strip waveguide was confirmed by water-experiment. The lowest order of antisymmetric Lamb wave was used in the frequency range with negligible dispersion. This plate wave was excited in the stainless steel strip waveguide of 1.0mm thickness and 13mm width by the comb-structure transducer of 2.3MHz frequency. Its attenuation coefficient was 1.2dB/m in air and 380dB/m in water. The signal to noise ratio of 25dB was obtained from a planar reflector 270mm away from the beam aperture of $13mm{\times}39mm$ size.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.1
• /
• pp.23-31
• /
• 1994

Sound scattering by cylindrical tubes submerged in water is numerically analyzed with material attenuation considered. Complex wave numbers is introduced to see the effects of material attenuation on resonance scattering Backscattering pressures from the shells immersed in water are calculated for air-filled aluminium and acryl tubes. In order to investigate the resonance characteristics in detail, numerical analysis program has been completed which enables us to evaluate the effects of material attenuation. The testing of the program by comparison with previous results is reported and calculation results are compared and discussed for both aluminium and acryl tubes with material attenuation considered. The resonance peak and width is strongly affected by attenuation and this becomes severe as the peak is sharp and narrow and $k_{1{\alpha}}$ is high.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.136-141
• /
• 2004

A torsional guided wave mode was applied to detect a crack in a pipe. An array of electromagnetic acoustic transduce. (EMAT that can generate and receive torsional guided ultrasound with the frequency of 200kHz was designed and fabricated for testing a pipe of 2.5 inch diameter Artificial notches with various depths were fabricated in a bent feeder pipe mock-up and the detectability was examined from the distance of 2m of the specimen. The axial notches with the depth of 5% of wall thickness were successfully detected by a torsional mode (T(0,1)) generated by the EMAT However, it was found that the depth of defects was not related to the signal amplitude.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1918-1920
• /
• 2005

The color and structure of urban constructions is a factor of urban landscape and shows their characteristics. Hence the modern buildings with their materials and external appearance makes up the urban image. But still yet, it was not easy to evaluate the value of visual landscape of buildings with objective measuring method. Most of all, it depends on the subjective estimation of a few talented or high educated experts with a sense of beauty. In relation to this kind of problems, it was tried here in this study to analyse the human response of brain wave pattern (EEG) with use of SD method, while the tested persons watched the urban landscape constructed in a visual reality. The tested persons were 10 adult males and females with no color blindness and intact cognitive function. Light source with color filter was used for color environment in chamber room. The signal of EEG is analysed digitally and grouped into the $\alpha$ and $\beta$ waves. The result showed that relative power of $\alpha$ wave ratio increased in natural landscape scenary clearly. From these results it was possible to evaluate the human response, which was affected by urban color and structure stimulation and it might be useful as an indicator of visual cognition amenity toward the design of urban construction environment.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.4
• /
• pp.527-534
• /
• 2010

Purpose : The application of tape to modulation of pain and muscular excitability has become common clinical practice among musculoskeletal physical therapy. However, the techniques of the tape application has been relied on empirical evidence in preference to the neurophysiological evidence. Thus, the mechanism of taping has to be elucidated further. The aim of this study was to determine whether elastic and non-elastic taping across a muscle does indeed change ${\alpha}$-motor neuron excitability. Methods : The study was performed on 10 neurologically healthy adults. Two different types of tape were applied to skin overlying gastrocnemius. The elastic tape stretched up to 120% of its original length but non-elastic tape didn't stretched up of its original length. The tape applied across the direction on thickest part of the gastrocnemius. The ${\alpha}$-motor neuron excitability of the gastrocnemius was assessed using the gastrocnemius H-reflex. The amplitude of the M-wave and H-reflex were measured across three conditions: before tape application, with tape and with the tape removed. Results : No significant changes of the excitability of the ${\alpha}$-motor neuron were obtained across three condition, either in the elastic and non-elastic tape. Conclusion : From the results, I could come to the conclusion that further clinical work will be required.

• Annals of Clinical Neurophysiology
• /
• v.3 no.1
• /
• pp.31-36
• /
• 2001

Background & Objectives : Fractal Dimension(FD) could be an index of correlation between variable parameters in non-linear chaotic signals. We tried to demonstrate that EEG wave is compatible with chaotic waves by measuring the Lyapunov exponent index and compared the difference of FD between variable age groups(teens, 30's, 50's) Methods : We estimated the Lyapunov exponent index and the FD from digital EEG data among five persons in each normal age groups by using the software which is programmed in our laboratory. Statistical analysis was done with SPSS win 8.0. The statistical differences of Lyapunov exponent index and FD between each electrodes and each age groups were done with ANOVA and paired sample t-test. Result : The Lyapunov exponent indexes were larger than 1 in each electrode and age group. There is no statistical difference in FD between each electrodes and each age groups. Except in 30th age group. In this group the FD of right hemisphere is larger than that of left hemisphere. Conclusion : The result of Lyapunov exponent index means EEG wave is a non-linear chaotic signal. And the results of FD suggest that chaotic parameters of right hemisphere is larger than those of left hemisphere at rest at least in younger people. We think that chaotic parameters can be a useful tool in investigating the variable diseases or brain states.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.48-53
• /
• 2008

In this paper, we developed the MMIC low noise amplifier using 100 nm metamorphic HEMTs technology in combination with coplanar circuit topology for 94 GHz applications. The $100nm\times60{\mu}m$ MHEMT devices for the MMIC LNA exhibited DC characteristics with a drain current density of 655 mA/mm, an extrinsic transconductance of 720 mS/mm. The current gain cutoff frequency $(f_T)$ and maximum oscillation frequency $(f_{max})$ were 195 GHz and 305 GHz, respectively. The realized MMIC LNA represented $S_{21}$ gain of 14.8 dB and noise figure of 4.6 dB at 94 GHz with an over-all chip size of $1.8mm\times1.48mm$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.38-47
• /
• 2007

The initiation of fatigue cracks in a simulated aircraft structure with a series of rivet holes was detected by acoustic emission(AE), then the crack length was determined by surface acoustic wave(SAW) technique. With the initiation and growth of fatigue cracks, AE events increased intermittently to form a stepwise incremental curve of cumulative AE events whereas the crack length increased more or less monotonically. With the SAW technique employed, the crack sizing for 13 different cracks including some short cracks was performed. With the reference to the measurement by traveling microscope, cracks in the range of $1{\sim}8mm$ long were reliably sized by the SAW technique. Although it was impossible to size the short fatigue cracks in the range shorter than 1 mm, the SAW technique still appeared practically useful for a range of crack lengths often found in aircraft structures.