• 대한전자공학회논문지
• /
• 제5권2호
• /
• pp.1-7
• /
• 1968

구형도파관상의 주기적인 불연속의 특성 즉 구형도파관의 넓은 면에 스롯트를 주기적으로 뚫은 안테나의 임피이던스를 T의 등가회로로 나타냈다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.669-671
• /
• 2001

This paper describes the operating characteristic analysis of PM-type magnetic circuit breaker for electromagnetic field, electric circuit and mechanical motion problems. Transient calculations are based upon the magnetic equivalent circuit analysis including non-linearity of materials and using iteration routines. The analysis results of this magnetic equivalent circuit are compared with those of FEM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.154-156
• /
• 1999

A Linear Stepping Motor(LSM) can operate open loop control mode similarly to a rotary stepping motor. The linear motion without any mechanical linkage in the LSM results in several advantages for precise positioning actuators. However, to realize the more stable and higher speed control without hunting, it is necessary to derive an equivalent circuit to explain the steady-state and transisent characteristics in order to find an adequate control rule for high performance control of the LSM. In this paper, magnetic equivalent circuit is obtained, based on the structure of the LSM, and then the electric equivalent circuit of the LSM is derived by solving equations for the magnetic equivalent circuit. The 1-step response characteristic of the LSM is analyzed by the ACSL with the voltage equations, the force equations, the force equations and the kinetic equation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.63-65
• /
• 2003

In the case of the large motors which can't direct load tests, IEEE 112 equivalent circuit test was selected instead of the circle diagram method in the newly KEPIC's code. According to the change of code, Hyosung established an equivalent circuit test method based on Standard IEEE 112. In this paper, we compared the test results between IEEE 112 and other standards, CSA C-390, JEC2137 for the large motors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1162-1164
• /
• 2005

A Linear Induction Motor that generates the direct thrust directly, is widely used for the operation system of electrified railroad, elevation system, conveyer system, and so on. There are two analysis methode of linear induction motor characteristics. One is the electrical magnetic analyzing, the other is analyzing equivalent circuit. The electrical magnetic analyzing methode has available advantages to consider the physical condition. The equivalent circuit analyzing methode has the elementary methode in the system of vector control and over shoot situation. In this paper, It is used the dynamic characteristic analyzing methode that can calculate efficiently the end effect by using equivalent circuit methode in the operating linear induction motor system modeling and doing simulation of output characteristics of vector controller.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권4호
• /
• pp.300-308
• /
• 2010

This paper describes the development of a low-power electrocardiogram (ECG) touch sensor intended for the use with two dry metal electrodes. An equivalent ECG extraction circuit model encountered in a ground-free two-electrode configuration is investigated for an optimal sensor read-out circuit design criteria. From the equivalent circuit model, (1) maximum sensor resolution is derived based on the electrode's background thermal noise, which originates from high electrode-skin contact impedance, together with the input referred noise of instrumentation amplifier (IA), (2) 60 Hz electrostatic coupling from mains and motion artifact are also considered to determine minimum requirement of common mode rejection ratio (CMRR) and input impedance of IA. A dedicated ECG read-out front end incorporating chopping scheme is introduced to provide an input referred circuit noise of 1.3 ${\mu}V_{rms}$ over 0.5 Hz ~ 200 Hz, CMRR of IA > 100 dB, sensor resolution of 7 bits, and dissipating only 36 ${\mu}W$. Together with 8 bits synchronous successive approximation register (SAR) ADC, the sensor IC chip is implemented in 0.18 ${\mu}m$ CMOS technology and integrated on a 5 cm $\times$ 8 cm PCB with two copper patterned electrodes. With the help of proposed touch sensor, ECG signal containing QRS complex and P, T waves are successfully extracted by simply touching the electrodes with two thumbs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.377-387
• /
• 2012

An intrinsic small signal equivalent circuit model of Cylindrical/Surrounded gate MOSFET is proposed. Admittance parameters of the device are extracted from circuit analysis and intrinsic circuit elements are presented in terms of real and imaginary parts of the admittance parameters. S parameters are then evaluated and justified with the simulated data extracted from 3D device simulation.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1759-1768
• /
• 2018

The energy density, power density and ohm resistance of battery change significantly as results of battery aging, which lead to decrease in the accuracy of the equivalent model. A parameter identification method of the equivale6nt circuit model with 3 R-C branches based on the test database of battery life cycle is proposed in this paper. This database is built on the basis of experiments such as updating of available capacity, charging and discharging tests at different rates and relaxation characteristics tests. It can realize regular update and calibration of key parameters like SOH, so as to ensure the reliability of parameters identified. Taking SOH, SOC and T as independent variables, lookup table method is adopted to set initial value for the parameter matrix. Meanwhile, in order to ensure the validity of the model, the least square method based on variable forgetting factor is adopted for optimizing to complete the identification of equivalent model parameters. By comparing the simulation data with measured data for charging and discharging experiments of Li-ion battery, the effectiveness of the full life cycle database and the model are verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.650-652
• /
• 2001

The permanent magnet in hybrid step motor is magnetized to the axial direction. Accordingly the 2D analysis method such as 2D finite element method cannot guarantee the analysis accuracy. In this paper, the characteristics of hybrid type step motor are analyzed by using 3D equivalent magnetic circuit network method(3D EMCNM). 3D EMCNM supplements magnetic equivalent circuit by numerical technique using distributive magnetic circuit parameter and 3D EMCNM is used for the accurate and efficient analysis. The validity of the analysis results is confirmed by comparing with the experimental ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.706-709
• /
• 1987

In this paper, the circuit analysis during the retrace period of E.H.T. generator is performed by means of the simplified equivalent circuit. The E.H.T. voltage and the beam current are computed by using Newton-Raphson method and the computed results are compared with those of experiment.