• Earthquakes and Structures
• /
• v.12 no.4
• /
• pp.397-407
• /
• 2017

To estimate the structural seismic demand, some methods are based on an equivalent linear system such as the Capacity Spectrum Method, the N2 method and the Equivalent Linearization method. Another category, widely investigated, is based on displacement correction such as the Displacement Coefficient Method and the Coefficient Method. Its basic concept consists in converting the elastic linear displacement of an equivalent Single Degree of Freedom system (SDOF) into a corresponding inelastic displacement. It relies on adequate modifying or reduction coefficient such as the inelastic deformation ratio which is usually developed for systems with known ductility factors ($C_{\mu}$) and ($C_R$) for known yield-strength reduction factor. The present paper proposes a rational approach which estimates this inelastic deformation ratio for SDOF bilinear systems by rigorous nonlinear analysis. It proposes a new inelastic deformation ratio which unifies and combines both $C_{\mu}$ and $C_R$ effects. It is defined by the ratio between the inelastic and elastic maximum lateral displacement demands. Three options are investigated in order to express the inelastic response spectra in terms of: ductility demand, yield strength reduction factor, and inelastic deformation ratio which depends on the period, the post-to-preyield stiffness ratio, the yield strength and the peak ground acceleration. This new inelastic deformation ratio ($C_{\eta}$) is describes the response spectra and is related to the capacity curve (pushover curve): normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), natural period (T), peak ductility factor (${\mu}$), and the yield strength reduction factor ($R_y$). For illustrative purposes, instantaneous ductility demand and yield strength reduction factor for a SDOF system subject to various recorded motions (El-Centro 1940 (N/S), Boumerdes: Algeria 2003). The method accuracy is investigated and compared to classical formulations, for various hysteretic models and values of the normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), and natural period (T). Though the ductility demand and yield strength reduction factor differ greatly for some given T and ${\eta}$ ranges, they remain take close when ${\eta}>1$, whereas they are equal to 1 for periods $T{\geq}1s$.

• 대한예방의학회:학술대회논문집
• /
• 1996.10a
• /
• pp.353-354
• /
• 1996

• Korean Journal of Poultry Science
• /
• v.9 no.1
• /
• pp.17-33
• /
• 1982

The purpose of this experiment is to clarify the additional effect of antibiotics for the chicken breeding feed. This experiment was carried out with 6,560 individuals which were collected from four farms, Dugil, Hyubhoi, Sanggog and Kumsan. The duration of this experiment was 6 months from July to December in 1981. 1. Body weight and body gain. (1) The range of the body gain was 1.91-7.60% The most effective sections was T$_3$, and the effect was T$_2$, T$_4$, T$_1$, T$\sub$5/ in order. (2) The environmental sanitation of the Sanggog farm was not so good. In this farm the body gain was severely occurred in T$_3$ and T$_2$ sections. Mere gain obtained from T$\sub$5/ section. (3) The environmental sanitation was good in Dugil, Hyubhoi and Kumsan. A little body gain was occurred in these farms, but differences were shown according to the place or breeds. 2. Amount of feed intake feed conversion ratio. (1) Amount of feed intake was increased 0.13-3.19%, and feed conversion ratio was improved 1.68-4.62% compared with control. T$_3$ section showed high percent and T$_4$ T$_1$, T$\sub$5/, Is, C in order. (2) The keeping method of the chicken breed in Hyubhoi was floor brooding. From Hyubhoi and Sanggog farms, the efficiency was increased 9.4-9.8%. (3) From Dugil and Kumsan, the rate of improvement was low. 3. Mortality : Mortality was merely decreased in Sanggog and Kumsan farms which the sanitary and fowl caring conditions had been had, by additional antibiotics. But there was no worthy effect. 4. The ratio of carcass and the degree of skin coloration. The additional antibiotics in feed had no effect on the ratio of carcass but had the influence on the yellowish skin coloration. Skin coloring was good in T$\sub$7/ section and T$_1$, T$\sub$6/, T$_4$, C, T$_3$, T$\sub$5/, T$_2$ in order. 5. Economical efficiency (1) The addition of the antibiotics in feed increased 3.76-10.95% of gross earning. The highest earning was occurred in T$_4$ section and T$_3$, T$_1$, T$_2$, T$\sub$5/, C sections in order. (2) The earning rate was influenced by the antibiotic products. (3) In Dugil and Kumsan farms, there was no difference in earning, however, in Hyubhoi and Sanggog farms there was wide difference in earning. Conclusionally, the addition of antibiotics in chicken breeding feed is necessary. Especially in bad condition of environmental sanitation and floor brooding, the effect of additional antibiotics is clear. Selection of antibiotics from various kinds, maker's confidence and quality problems are important.

• Wind and Structures
• /
• v.27 no.3
• /
• pp.187-197
• /
• 2018

In this study, aerodynamic characteristics of a horizontal axis wind turbine (HAWT) were evaluated and discussed in terms of measured data in existing onshore wind farm. Five wind turbines (T1, T2, T3, T4 and T5) were selected, and hub-height wind speed, $U_D$, wind turbine power output, P and turbine rotational speed, ${\Omega}$ data measured from these turbines were used for evaluation. In order to obtain characteristics of axial flow induction factor, a, power coefficient, $C_p$, thrust force coefficient, $C_T$, thrust force, T and tangential flow induction factor, a', Blade Element Momentum (BEM) theory was used. According to the results obtained, during a year, probability density of turbines at a rotational speed of 16.1 rpm was determined as approximately 45%. Optimum tip speed ratio was calculated to be 7.12 for most efficient wind turbine. Maximum $C_p$ was found to be 30% corresponding to this tip speed ratio.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1493-1494
• /
• 1998

We have investigated the influence of Ti/Ba mole ratio in the characteristics of the modified $BaTiO_3$ systems with Ca addition. The specimens were fabricated with variations in Ti/Ba mole ratio between 0.995 and 1.01, and sintered in the temperature range between $1325^{\circ}C$ and $1375^{\circ}C$. When Ti/Ba mole ratio was 1.005 and sintering temperature was $1350^{\circ}C$, the breakdown voltage shows 260[V /mm].

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6333-6337
• /
• 2014

Background: In this case-control study, we aimed to investigate the relationship between the methylenetetrahydrofolate reductase (MTHFR) C677T polymorphism and lung cancer. Materials and Methods: Total 200 individuals including 100 patients with lung cancer and 100 controls were analyzed. Genotyping of MTHFR C677T was performed using PCR and RFLP methods. Results: The majority of the patients were men and 90% were smokers. We found that the risk ratio for development of LC was 13-times higher in smokers compared with non-smokers between patient and control groups in our study (OR:13.5, 95%CI:6.27-29.04, p:0.0001). Besides, the risk ratio for development of LC was nine times higher in individuals with cancer history in their family than those without cancer history (OR:9.65, 95%CI: 2.79-33.36; p:0.0001). When genotype distributions and allele frequencies were analyzed in the study groups, no significant difference was apparent (${\chi}^2$:0.53, p=0.76). In addition, no correlation between genotypes of MTHFRC677T polymorphism and histological type of LC was found (${\chi}^2$:0.99, p=0.60). Conclusions: These results suggest that there was no association between the MTHFR C677T polymorphism and lung cancer in the Turkish population.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.852-856
• /
• 2000

In this paper, we investigated the output power, step-up ratio and efficiency properties of piezoelectric transformer with dielectric and piezoelectric characteristics of manufactured ceramics. The piezoelectric transformers with $2.0$\times$10$\times$48[$mm^3$] size were fabricated and its electrical properties were measured. When output power of 6W was constantly maintained, T2 piezoelectric transformer showed the minimum temperature rise of $9(^{\circ}C)$ at $150(K\Omega)$ load resistance. However, T1 piezoelecric transformer showed the temperature rise of $7.2(^{\circ}C)$ at $200(K\Omega)$ load resistance. The 6[w] CCFL (Cold Cathode Fluorescent Lamp) was successfully driven by T1 and T2 piezoelectric transformer but, its temperature rise $\Delta$T[$^{\circ}C)$] was generated more than $20(^{\circ}C)$. It is concluded that we have to design the piezoelectric transformers so that its output impedance correspond to the load impeadance, including any stray capacitance.

• Solar Energy
• /
• v.9 no.2
• /
• pp.42-50
• /
• 1989

The Buoyant Jets were analysed experimentally changing flow rate (0.0291/s, 0.0371/s, 0.0451/s), ratio of nozzle tip area to throat area (aspect ratio ${\beta}$=0.4, 1.0, 1.9), and also the temperature difference (${\Delta}T=Ti-T{\infty}$) between the temperature of the inflow water into the storage tank ($1m{\times}1m{\times}3m$) and the mean temperature of the water in the storage tank were changed as $25^{\circ}C,\;35^{\circ}C$ and $45^{\circ}C$. The more aspect ratio decreased, the more the trajectories of Buoyant Jets center-line were decreased and not the more the trajectories of Buoyant Jets centerline were influenced by the increment of the difference of the temperature. The more aspect ratio decreased, the more the half widths and dilution ratio of Buoyant Jets were increased and not the more the half widths and dilution ratio of Buoyant Jets were influenced by the increment of the difference of the temperature. Fr number is the factor that can predict the flow pattern over the whole flow field. And yet for the consideration the near field of Buoyant Jets flow pattern is dominated by magnitude of momentum and buoyancy force.

• The Korean Journal of Nuclear Medicine
• /
• v.15 no.1
• /
• pp.1-11
• /
• 1981

To evaluate the diagnostic accuracy of the measurement of free thyroxine (FT4) by radioimmunoassay, we measured free $T_4\;and\;T_4,\;T_3,\;T_3RU$, TSH and TBG serum levels by radioimmunoassay in 18 healthy persons and 52 patients with various thyroid diseases and 11 normal pregnant women. The results are as follows. 1. In 19 cases of overt hyperthyroidism, $T_3,\;free\;T_4$ and FTI, $T_4/TBG$ ratio reflect hyperfunction in all cases. $T_4$ is increased in 94% (18/19) and TBG and TSH are decreased in 79% (15/19). 2. In 8 patients with overt hypothyroidism, TSH is increased in all cases and free $T_4$ and FTI is decreased in all cases. $T_4$ is decreased in 87.5% (7/8), $T_3$ is decreased in 75% (6/8) and $T_4/TBG$ ratio is decreased in 62.5% (5/8). 3. In 5 patients who are clinically in euthyroid state after treatment of hyperthyroidism, $T_4,\;free\;T_4$, FTI and TSH are in the normal range in all cases and $T_3$ is normal in 60% (3/5) and slightly increased in 40% (2/5). 4. In 10 patients who showed clinically borderline hypothyroidism after treatment of hyperthyroidism, TSH is increased in all cases and free $T_4$ and FTI are decreased in all cases, but $T_4\;and\;T_3,\;T_4/TBG$ ratio are in the normal limit in all cases. So after treatment of hyperthyroidism, TSH, free $T_4$ or FTI are recommended as optimal thyroid function test. 5. In normal pregnancy, free $T_4$, FTI and $T_4/TBG$ ratio reflect normal function, but the other parameters revealed unreliable due to the influence of increased TBG. Also TBG and TSH level in pregnancy is increased significantly compared with normal healthy control group. 6. The coefficients of correlation between free $T_4$ and FTI were 0.862 (p<0.001) and 0.685 (p<0.001) between free $T_4\;and\;T_4/TBG$ ratio. In most patients, diagnostic value of free $T_4$ was comparable and even superior to FTI, so free $T_4$ measurement can be used routinely with thyrotropin assay in the diagnosis of hypothyrodism or with $T_3$ for the diagnosis of hyperthyroidism.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.802-808
• /
• 1996

PbTiO3 thin films were fabricated onto MgO(100) single crystal substrate by reactive D. C magnetron sput-tering of Pb and Ti metal in an oxygen and argon gas mixture. The annealing of the thin films resulted in the decrease of both the c-axis orientation ratio and the lattice parameter. It is well known that the c-axis lattice parameter of thin film is dependent on the Pb/(Pb+Ti)ratio and the residual stress in the film The PbTiO3 thin films with a Pb/(Pb+T) ratio ranging from 0.45 to 0.57 were fabricated and annealed. The structure of the film the c-axis orientation ratio and the lattice parameter were not dependent on the Pb/(Pb+Ti) ratio before and after annealing. These experimental results proved that the decrease of the c-axis lattice parameter under the annealing conditions was due to the relaxation of the intrinsic stress in the film. This relaxation of the intrinsic stress caused the decrease of the c-axis orientation ratio and this phenomenon can be explained by c-axis growth lattice model.