• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.325-337
• /
• 2003

This study was designed to determine the distribution of trans fatty acids (tFAs) isomers of Processed foods commonly consumed in Korea. The tFAs positional isomers were analyzed using GC/MS spectrometer with HP-23 cis/trans FAME, capillary column (50m $\times$ 0.20 mm, id., 0.2 ${\mu}{\textrm}{m}$ film thickness) for 41 food samples. TFAs isomers were identified by comparing retention time with standards and GC/MS spectrum. In margarines, the content of tFAs ranged from 4.0% to 25.16% and the most abundant positional isomer of tFAs was C18:1 $\Delta$9t. In oils and fats, lards contained higher levels of tFAs (5.70~16.54%) than shortenings (6.77~10.55%). Shortenings contained higher levels of C18:1 $\Delta$9t (3.1~5.1%) than lard (1.6~4.3%), but corn oils had no tFAs. In seasonings, mayonnaise had no C16:1 $\Delta$9t, whereas C18:3t was detected. The content of tFAs in confectioneries was wide (16.20~52.16%). Among them, instant popcorns contained the highest amount of tFAs. Milk and dairy products showed even distribution of tFAS such as C18:1t, C18:2t, and C18:3t. Predominant tFAS isomer of condensed milk and ice cream was C16:1 $\Delta$9t. Frozen french fries and fried chicken contained higher levels of C18:1$\Delta$9t (9.4%), whereas grilled pork (jowl) had no C18:1 $\Delta$9t. The amount of tFAs per serving size was the highest in popcorn, followed by frozen pizza, frozen french fries, fried chicken, and bakeries.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.1
• /
• pp.69-79
• /
• 2020

In this paper, we study the properties of T satisfying [CTC, T] = 0 for some conjugation C where [R, S] := RS - SR. In particular, we show that if T is normal, then [CTC, C] = 0. Moreover, the class of operators T satisfy [CTC, T] = 0 is norm closed. Finally, we prove that if T is complex symmetric, then T is binormal if and only if [C|T|C, |T|] = 0.

• Parasites, Hosts and Diseases
• /
• v.30 no.2
• /
• pp.141-146
• /
• 1992

A total of 197 fecal specimens was prepared for quantitative examination of helminth eggs by modified Kato's cellophane thick smear (M.C.T.S.) and Stoll's dilution egg counting technique (D.E,C.T.). The comparative effectiveness of two techniques was evaluated and conversion function was deduced. The average time required for the microscopic examination on one slide by M.C.T.S. was 12.6 minutes and that of D.E.C.T. was 14.6 minutes. M.C.T.S. showed lower false negative rate than D.E.C.T in light worm burden cases. Functions to convert the counts obtained by M.C.T.S. to E.P.G. by Stoll's dilution egg counting technique were $47.86{\times}10^{0.87{\;}logM.C.T.S.},{\;}$ in A. lumbricoides, $41.69{\times}10^{0.82{\;}logM.C.T.S.}$ in T. trichiura and $63.10{\times}10^{0.85{\;}logM.C.T.S.}$ in C. sinensis. It was suggested M.C.T.S. be better than D.E.C.T. for the quantitative examination of intestinal helminthiases such as A. lumbricoides, T. trichiura, and C. sinensis infections even in the cases with low worm burden.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.193-195
• /
• 1970

The cultural conditions of the osmophilic yeasts for higher concentration of NaCl selected in the previous report were examined and the results obtained were as follows. 1) The strain $T_3\;and\;T_8$ were grown exceedingly well on the media containing 15 percent of NaCl and $T_5\;and\;T_9,\;T_{10}\;and\;T_{11}$ on the media containing 5 percent of NaCl. 2) The optimum temperature for growth of the strain $T_3\;and\;T_5$ was $30^{\circ}C,\;T_8\;T_{10}$ and $T_{11}\;was\;25^{\circ}C\;and\;T_9\;was\;35^{\circ}C.$ 3) Their lethal temperature was $60^{\circ}C$ (treatment for 10 minutes). 4) The optimum pH for growth of the strain $T_3\;and\;T_8$ was pH 4.0, $T_5$ was pH 6.0 and $T_9\;T_9\;and\;T_{11}$ was pH 5.0, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.99-106
• /
• 1993

A relationship $(T_c = -17.869C^2+1840.2C-46623)$ between Curie Temperature$(T_c)$ and (C), $Li_2O$ mole percent(%) was established from the measurement results of Curie temperature $(T_c)$) analysed by DTA(Differential Thermal Analysis) in the range from 48.50 to 49.00 $Li_2O$ mole %. Congruent melt composition of $LiTaO_3$ single crystal was to be 48.65 $Li_2O$ mole % and its Curie temperature was also determined to be $610{\pm}1^{\circ}C$ from the results of Curie temperature difference, ${\Delta}T (T_{c(Top)}-T{_c(Tail)})$ of Czochralski grown $LiTaO_3$ crystals and the distribution coefficient(k). The k was calculated from $LiO_2$ mole ratio of initial melt to final melt and initial crystal to final crystal in the range from 48.60 to 48.70 $Li_2O$ mole %.

• Journal of Animal Science and Technology
• /
• v.52 no.2
• /
• pp.149-156
• /
• 2010

This study was carried out to investigate the effect of dietary supplementation of whole grain barley cracked feed on eating behaviors of Hanwoo steers during finish fattening period. Thirty Hanwoo steers (28 months old) were assigned to five dietary treatments: control (C: normal concentrate as a basal diet), and four feeding groups [T1: 10% addition of whole grain barley cracked (WGBC) feed, T2: 20% addition of WGBC, T3: 30% addition of WGBC and T4: 40% WGBC during the finish fattening period, respectively]. The results of eating behaviors for 48 hours are summarized as follows: Total intake (roughage + concentrate) was higher in the order of T4 > T1 > C > T3 > T2 (P<0.05). Eating time was higher in the order of T4 > T3 > C > T1 > T2 (P<0.01). Ruminating time was higher in the order of T4 > T1 > C > T3 > T2 (P<0.05). But resting time was higher in the order of T2 > T1 > C > T3 > T4. The chewing time including eating and ruminating time was higher in the order of T4 > T3 > C > T1 > T2 (P<0.01). Number of bolus, number of total chews, number of chews/bolus and feed value index were highest in T4 (P<0.05). Ruminating time per bolus was highest in C, and T3 was the lowest (P<0.05) as compared to others. Number of bolus per minute was highest in T3, and C is the lowest (P<0.05). Eating rate and chewing efficiency were highest in T2 (P<0.01, 0.05), but ruminating efficiency was higher in T1 than others. The group behavior was higher in the order of resting(78.5%) > ruminating(11.4%) > eating(10.1%). The stand resting of group behavior was higher in the order of T3 > C > T2 > T1 > T4.

• Journal of the Korean Ceramic Society
• /
• v.18 no.2
• /
• pp.119-125
• /
• 1981

The thermostable resistor was made by using P.T.C.R-N.T.C.R. ceramics. In this study $BaTiO_3$ type P.T.C.R. ceramics and $SnO_2-Sb_2O_3$ type N.T.C.R. ceramics were cocrystallized in one body and electrical resistance was stable under the temperature variation between $25^{\circ}C$-40$0^{\circ}C$. The ceramics showed the most stable electrical resistance for the mal variation when the composition was 0.6P.T.C.R. $BaTiO_3$,$ 0.4SnO_2$ and 0.01 $Sb_2O_3$.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.913-921
• /
• 2021

Objective : Accurate measurement of T1 slope (a component of T1s minus cervical lordosis [CL]) is often constrained by anatomical limitations. In this situation, efforts should be made to find the exact meaning of T1s-CL and whether there are any alternatives to it. Methods : We enrolled 117 patients who received two-level anterior cervical discectomy and fusion (ACDF). Occipital slope, C2 slope (C2s), C7 slope (C7s), T1, O-C2 angle (O-C2A), C2-7 angle (C2-7A), O-C7 angle (O-C7A), T1s-CL, C7-T1 angle (C7-T1A), and C2-7 sagittal vertical axis were measured. We determined 16° (T1s-CL) as the reference point for dividing subjects into the mismatch group and the balance group, and a comparative analysis was performed. Results : The mean value of C7-T1A was constantly maintained within 2.6° peri-operatively. In addition, C2s and T1s-CL showed the same absolute change (Δ|0.8|°). The mean values of T1s-CL of the mismatch and balance groups were 23.0° and 7.6°, respectively. The five factors with the largest differences between the two groups were as follows : C2s (Δ13.3°), T1s-CL (Δ15.4°), O-C2A (Δ8.7°), C2-7A (Δ14.7°), and segmental angle (Δ7.9°) before surgery. Only four factors showed statistically significant change between the two groups after ACDF : T1s-CL (Δ4.0° vs. Δ0.2°), C2s (Δ3.2° vs. Δ0.7°), O-C2A (Δ2.6° vs. Δ1.3°), C2-7A (Δ6.3° vs. Δ1.3°). A very strong correlation between T1s-CL and C2s was also found (r=|0.88-0.96|). Conclusion : C2s itself may be the essential key to represent T1s-CL. The amounts and directions of change of these two factors (T1s-CL and C2s) were also almost identical. The above phenomenon was re-confirmed once again through the correlation analysis.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.5
• /
• pp.345-351
• /
• 2009

Organic cation transporters (OCTs) are important for absorption, elimination of many endogenous small organic cations as well as a wide array of drugs and environmental toxins. This gene is located in a cluster on chromosome 6 and OCTs are in major organs such as intestine, liver, kidney, brain and placenta. Therefore, expression levels and function of OCTs directly affect plasma levels and intracellular concentrations of drugs and thereby determine therapeutic response. The aim of this study was to investigate the frequency of the SNPs on OCT1 (C181T and C1022T) and OCT2 (G808T) to analyze haplotype frequency in healthy Korean population. Human subjects have been genotyped for OCT1 (C181T for 195 subjects and C1022T for 825 subjects), using polymerase chain reaction-based diagnostic tests (RFLP). And for OCT2 (G808T), a total of 861 subjects have been genotyped, using pyrosequencing method. Haplotype was statistically inferred using an algorithm based on the expectation-maximization (EM). OCT1 C181T genotyping showed 100% homozygous wild-type (C/C). OCT1 C1022T genotyping showed wild-type (C/C), heterozygous (C/T) and homozygous mutant-type (T/T) and each accounted for 72.1, 24.5 and 3.4%, respectively. OCT2 G808T genotyping results also showed homozygous wild-type (G/G), heterozygous (G/T) and homozygous mutant-type (T/T) and each took 81.8, 17.9 and 0.3%, respectively. Based on these genotype data, haplotype analysis between OCT1 C181T and OCT1 C1022T has proceeded. The result has revealed that linkage disequilibrium between alleles is not obvious (P=0.0122).

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.1
• /
• pp.13-18
• /
• 1991

The formation of high $T_c$ phase is very sluggish and c parameter of unit cell of high $T_c$ phase is about $37{\AA}$. High $T_c$ oxide superconductor with a $T_c$ above 100 K has been successfully prepared by solid state reaction method in BiSrCaCuO system by Pb adding. The microstructure related to the formation of the high $T_c$ phase has been investigated. As compared with YBCO compound, the formation reaction of the high $T_c$ requires long time heat treatment. It is due to the transformation from the low $T_c$ phase to high $T_c$ phase. The sintering just below the melting point of the calcined powder mixture is effective on the formation of the high $T_c$ phase in Pb-added BiSrCaCuO system. The growth of the high $T_c$ superconducting phase has a thin plate shape, which is characterized by the c parameter of $37{\AA}$. The formation of the high $T_c$ phases is delayed by the excessive addition of Pb. The lattice parameter(c) of the unit cell (both the low and high $T_c$ phases) is increased with increase of Pb.