• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.1
• /
• pp.52-57
• /
• 2013

This study was conducted to determine the effect of dietary whole-crop barley silage on the daily feed intake, daily weight gain, velvet antler yield and economic efficacy in elk during growth. A total of 21 elk (average BW 303 kg, 5 years old) were allotted randomly to three treatments. The three treatments were T1 (hay diet), T2 (whole-crop barley silage), and T3 (50% hay + 50% whole-crop barley silage). The average daily weight gain of T3 was higher than the others throughout the entire experimental period. The average daily feed intake of elk in decreasing order was as follows; T1>T3>T2. The velvet antler yield was higher in T3 group (8,585 g) compared with T1 (8,037 g) and T2 (7,713 g). However, there were no significant differences in the average daily feed intake, average daily weight gain, or velvet antler yield (p>0.05). In economic efficacy, T3 was gained about 29~43% more value than T1 or T2. In conclusion, the mixed feeding of 50% hay and 50% whole-crop barley silage was more effective than feeding hay of barley alone, in terms of average daily weight gain, velvet antler yield, and economic efficacy in elk.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.8
• /
• pp.858-868
• /
• 1992

0.085Ba(LaS11/2TNbS11/2T)OS13T-0.915Pb(ZrS1yTTiS11-yT)OS13T (0.45$\leq$y$\leq$0.65) transparent electrooptic ceramics were fabricated by two-stage sintering method. The structural, ferroelectric and electrooptic properties were investigated varying composition and second sintering time. Also the possibility of application to electrooptic device was studied. If we increase the PbZrOS13T contents, dielectric constants were increased and Curie temperature was decreased. In the composition of 0.55[mol] PbZrOS13T, electromechanical coupling factor and piezoelectric charge constant were the highest values of 43[%] and 173x10S0-12T[C/N], respectively. Mechanical quality factors were decreased with the increasing PbZrOS13T contents. Light transmittance was increased with wavelength when measured from 300[nm] to 900[nm], and with PbZrOS13T contents in the range of 0.50[mol]-0.65[mol], and had the highest value of 67[%] in the composition of 0.65[mol] PbZrOS13T. From the results of ferroelectric hysteresis loop and transmitted light intensity with electric field, the specimens with compositions of 0.65,0.60,0.55[mol] PbZrOS13T were applicable to electrooptic memory device and those with compositions of 0.50,0.45[mol] PbZrOS13T were applicable to linear electrooptic device.

• Korean Journal of Plant Resources
• /
• v.22 no.2
• /
• pp.116-122
• /
• 2009

Heteropappus arenarius Kitam., an autumn-flowering biennial belonging to wild chrysanthemums, is found to be native in southeastern coastal area and Jeju island of Korea. It could play a good role for ground cover plants on a large-scale landscape area, especially, barren soil or sloping hillside. This study was initiated to screen optimum germination temperature influenced by local strain and harvesting stage of H. arenarius. The following was the response of seed germination between local strain and temperature. The average of final germination percentage (FG) was the highest in 'Guryongpo' (89.7%) among four local strains, followed by 'Gujwa' (87.3%), 'Gampo' (87.3%), and 'HKNU-I' (71.5%). The average of $T_{50}$ was shorter in 'Gujwa' (3.6 d) and 'Guryongpo' (4.0 d) than the others. The average of FG and $T_{50}$ was the highest as 76.2% and shortest as 3.6 d in $20^{\circ}C$, respectively, followed by $30^{\circ}C$, $25^{\circ}C$, and $15^{\circ}C$. In case of 'Gujwa', however, FG and T50 was higher in $20^{\circ}C$ and shorter in $15^{\circ}C$ than others. In the relationship between harvesting stage and temperature, the average of FG was greatly higher in Stage III (90.7%) and Stage IV (88.6%) than the others including Stage II (35.7%) and Stage I (26.0%). The average of $T_{50}$ was shorter in Stage IV (3.7 d) and Stage III (4.3 d) than the others, which showed less than 50% of FG. Nevertheless, the available range of seed harvesting stage was from Stage I to Stage IV because H. arenarius seeds could germinate at all stages. In conclusion, it was recommended that the optimum temperature and harvesting stage was $20^{\circ}C$ and Stage $III{\sim}IV$, respectively, for seed germination of H. arenarius.

• The Research Journal of the Costume Culture
• /
• v.26 no.2
• /
• pp.203-216
• /
• 2018

This study explores sustainability education in textile and apparel (T&A) programs in U.S. higher education institutions. Specifically, the researchers study whether more courses with sustainability focus are offered in higher-ranked institutions and explore whether sustainability is taught more in specific T&A related subject fields. Content analysis was conducted for 3,200 courses found in online course catalogs or the course information sites of 69 institutions. Institutions were selected from the 2015 rankings of the top 50 fashion design and top 50 fashion merchandising schools in the US on www.fashion-schools.org. All cases were coded by two coders with a Cohen's Kappa score of 97.5%, indicating good interrater reliability. Coded data were analyzed through descriptive statistics, correlation analysis, and t-tests. The findings show that sustainability is being integrated into the curricula and across courses of T&A programs in the U.S. Over half of the institution surveyed offered at least one sustainability embedded course. Higher ranked institutions provided more sustainability-related courses than power-ranked institutions. A natural match between the subject field and specific sustainability theme was observed (e.g., cultural diversity in history/culture and social psychology/education; recycle/reuse in textile science; sustainability in fashion design; social responsibility and ethics in industry/consumer). The need to introduce sustainability in courses holistically is discussed, whereby sustainability within the industry supply chain is examined in a connected way.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.416-422
• /
• 1996

Twenty one phenylacetylshikonin analogues were synthesized from various subsitituted phenyl acetic acids and their cytotoxicity values against A549, K562 and L1210 cell lines and antitumor action in mice bearing S-180 cells were measured. All of phenylacetylshikonin analogues expressed a potent cytotoxicity $(ED_{50}, 0.1-1.80{\mu}g/ml)$ against L1210 and K562 cells. L1210 cells were the most sensitive to shikonin analogues among these cells. Except 4-methosyphenylacetylshikonin $(0.098 {\mu}g/ml)$, and a-acetoxyphenylacetylshikonin $(0.10 {\mu}g/ml)$, all other shikonin derivatives sshowed higher $ED_{50}$ values than phenylacetylshikonin $(0.13{\mu}g/ml)$, in L1210. In K562 cell, a-substitution of phenylacetylshikonin $(0.1{\mu}g/ml)$, while other subsitutions increased it slightly; 4-methoxyphenylacetylshikonin $(0.033{\mu}g/ml)$ showed a exceptionally good cytotoxicity against K562 cell. 4-Halogenation tended to decrease the cytotoxic effect on L1210 cells, while it enhanced the effect on K562; 4-bromophenylacetyl $$[ED_{50};(L1210)=1.76{\mu}g/ml, ;ED_{50};(K 562)=0.32 {\mu}g/ml]$$ and 4-chlorophenylacetyl shikonin $$[ED_{50};(L1210)=1.64 {\mu}g/ml, ;ED_{50};(K562)=0.32 {\mu}g/ml]$$. In contrast, A549 cells were much less sensitive to these shikonin analogues which showed $ED_{50}$ values of$1.5-1.35 {\mu}g/ml)$.Most of phenylacetylshikonin derivatives showed good antitumor activity in mice bearing S-180 cells. a-A-cetoxyphenylacetylshikonin and 4-dimethylaminophenylacetylshikonin showed highest T/C value (192-195%), implying that introduction of a-acetyl or of 4-dimethylamino group enhanced the antitumor activity as shown for 4-dimethylaminophenylacetylshikonin (T/C, 192%). It might be due to improvement of water solubility by dimethylamino group in the molecule.

• Current Photovoltaic Research
• /
• v.10 no.1
• /
• pp.28-32
• /
• 2022

We investigated the optical and electrical characteristics of ITO/Ag/ITO (IAI) 3-layer thin films prepared by using RF/DC sputtering. To measure the thickness of all thin film samples, we used scanning electron microscopy. As a function of Ag thickness we characterized the optical transmittance and sheet resistance of the IAI samples by using UV-Visible spectroscopy and Hall measurement system, respectively. While the thickness of both ITO thin films in the 3-layered IAI samples were fixed at 50 nm, we varied Ag layer thickness in the range of 0 nm to 11 nm. The optical transmittance and sheet resistance of the 3-layered IAI thin films were found to vary strongly with the thickness of Ag film in the ITO (50 nm)/Ag(t₀)/ITO (50 nm) thin film. For the best transparent conducting oxide (TCO) electrode, we obtained a 3-layered ITO (50 nm)/Ag (t₀ = 8.5 nm)/ITO (50 nm) that showed an avrage optical transmittance, AVT = 90.12% in the visible light region of 380 nm to 780 nm and the sheet resistance, R_□ = 7.24 Ω/□.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.2
• /
• pp.281-286
• /
• 2015

In this study, free radical scavenging activities (ABTS, DPPH, NBT, TBARS, and ORAC) and anti-obesity potential were evaluated using 50% ethanol extract from fermented Curcuma longa L. (FCE50). FCE50 showed free radical scavenging activities and anti-oxidant potential. Lipid accumulation and intracellular TG content were significantly reduced by 25.8% and 28.6%, respectively, by $250{\mu}g/mL$ of FCE50 compared to adipocytes. Glucose uptake was significantly reduced by 12.0%. FCE50 significantly reduced mRNA expression of acetyl-CoA carboxylase in 3T3-L1 cells. These results indicate that the anti-adipogenic effect of FCE50 might be due to its radical scavenging activity and anti-oxidant potential.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.4 s.247
• /
• pp.337-342
• /
• 2006

Natural convection flows in a cubical air-filled cavity that has one pair of opposing faces isothermal at different temperatures, $T_h\;and\;T_c$, respectively, the remaining four faces having a linear variation from $T_c\;to\;T_h$ are numerically simulated by a solution code(PowerCFD) using unstructured cell-centered method. Special attention is paid to three-dimensional flow and thermal characteristics according to the variation of inclination angle $\theta$ of the isothermal faces from horizontal: namely $\theta=0^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ},\;50^{\circ},\;60^{\circ},\;75^{\circ}\;and\;90^{\circ}$. Comparisons of the average Nusselt number at the cold face are made with experimental benchmark results found in the literature. It is demonstrated that the average Nusselt number at the cold face has a maximum value around the inclination angle of $50^{\circ}$. It is also found that the code is capable of producing accurately the nature of the laminar convection in a cubical air-filled cavity with differentially heated walls.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.164-169
• /
• 2005

A.T.S.의 스위칭 구조와 접점 환경은 주로 아크 전류, 접촉 저항, 아크 시간 등의 불리적 요인이 주로 마모와 특성에 영향을 미치게 된다. 사용되는 접점 재료는 W 또는 WC-Cu 계로 형상과 크기는 전형적인 반구형 구조의 접촉으로 구동이 이루어진다. 따라서 A.T.S.용 접점의 아크 마모 특성 시험을 위한 고려 요인은 이러한 점을 고려하여 시험과 분석이 이루어 졌다. 접점의 마모 특성 실험식으로부터 실제적인 관점에서 보면 제한된 수명을 나타내는 $n_L$을 보장하기 때문에 b<1의 경우가 가장 바람직한 결과로 ATS 접점 시편의 경우 $b{\fallingdotseq}0.99$로 안정된 접점 아크 마모 특성을 갖는 것으로 판단된다. 아크 전압에 대한 모델링과 실험에서 접점 간극 거리 1<0.1mm, 아크전류 i<100A의 시험 조건에 대해 검토한 결과 ATS 접점 시편의 아크전압은 $u_a=10.2V$로 계산되었다. 이 값은 설험적인 값과 상당히 접근하는 특성을 갖는 것으로 나타났으며, 아크에 의한 마모를 억제하기 위해 첨가하는 WC 또는 W의 복합 소결로 인해 아크 에너지가 감소되는 것을 보여준다. 한편 접점의 아크 동작이 분리되는 순간의 동작 시험에서 기존 W(50%wt)-Cu(50%wt) 접점의 값과 비교하면 분리시 아크 전압은 상대적으로 낮아지는 현상은 W강화 첨가량의 증가로 인한 아크 에너지 감소의 제한성을 나타내는 것으로 사료된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.82-87
• /
• 2004

The general requirements to achieve the structural integrity of the airframe are described in the military specification, MIL-HDBK-1530. One of these requirements is the durability and damage tolerance of the airframe, which should be shown through the analysis and test based on the related specifications. This paper describes the full scale durability test load simulation to evaluate the structural safety and durability of the advanced trainer, T-50. The test load simulation was performed according to the procedure in the military specification and the KAF contract requirements. The durability test design technique which involve the floating test set-up, the optimal test load simulation method, and the 6-DOF test article balance method to secure the real flight conditions as many as possible. It was confirmed that this method will be available in a similar full-scale airframe structural test in future.