• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.95.2-95
• /
• 2002

1. Introduction of Camera Detection system Camera Detection system is an equipment that can detect realtime traffic information by image processing techniques. This information can be used to analyze and control road traffic flow. It is also used as a method to detect and control traffic flow for ITS(Intelligent Transportation System). Traffic information includes speed, head way, traffic flow, occupation time and length of queue. There are many detection systems for traffic data. But video detection system can detect multiple lanes with only one camera and collect various traffic information. So it is thought to be the most efficient method of all detection system. Though the...

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1297-1302
• /
• 2000

A literature review has been carried out to investigate why bridges have collapsed without warning. The reasons behind the collapses have been categorized into short and long term risks. It is thought that permanent monitoring systems which assess structural adequacy are more appropriate to long term risks. From the knowledge of the Korean bridge stock, its current problems and its likely future problems, it was considered that generally the most useful application for a permanent monitoring system is to monitor where chloride-induced corrosion either of the reinforcement or prestressing tendons is possible. A number of permanent monitoring systems currently in use on existing bridges which include some aspect of corrosion detection have been reviewed. The reasons as to why they are being used, what is being measured, what techniques are being used, and if they are deemed successful has been investigated. Based on these findings, and experimental programme has been constructed to investigate the accuracy, reliability and usefulness of various suitable techniques which could be included in a permanent monitoring system.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.370-372
• /
• 2003

As there expands the usage of Al-Cu connections to interface aluminum and copper in power distribution systems, efforts to mitigate the mechanical, electrical or electro-chemical degradation are widely spreading. The explosive bending technology, in particular, has been thought as a countermeasure for the degradation. In this paper, electrochemical analysis and optical microscopic observation are carried out in order to compare the corrosion resistivities of the commercial compression type bimetallic sleeve and the explosion type bimetallic sleeve. The results show that the explosive bonding technology can prevent the interfacial corrosion caused by the formation of crevices and pits as well as from galvanic potential difference.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.131-134
• /
• 1999

Microstructure modification and electrochemical properties are investigate to estimate the effects of internal chlorides on the steel corrosion in the blended cement systems. According to the test results, slag cement system showed high chloride binding capacity and low corrosion rate. The impedance data showed three distince arcs from lowest(mHz) frequency to highest (MHz) frequency due to product layer, interfacial reaction and bulk matrix. Through the microstructural investigation, fine steel-matrix interface of slag cement system was observed but rough steel-matrix interface of OPC system was observed. Friedel's salt was thought that the substantial material contributed to the chloride binding of slag cement system.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.5
• /
• pp.77-85
• /
• 1999

Irrigation pipeline systems have been recently adopted for irrigation purposes, which was thought to improve irrigation efficiencies. However, if hydraulic characteristics are not evaluated in designing , overpressure due to waterhammer may occur and result in serious problems. Therefore, in this study a model was formulated to simulate unsteady motion of water in a pipeline resulting from valve closure, the applicability of the model owas tested with fiedld data, and the results showed good agreement in maximum piezometric head. Also, simulated maximum piezometric head was compared with designed piezometric head computed by empirical method, and maximum piezometric head in a pipeline resulting from valve closure was simulated and analyzed with varing surge tank's position and diameter.

• Journal of the Korea Society for Simulation
• /
• v.8 no.1
• /
• pp.63-76
• /
• 1999

Recently in manufacturing environment, manufacturing order is characterized by unstable market demand, shorter product life cycle, a variety of product and shorter production lead time. In order to adapt this manufacturing order, flexible manufacturing systems(FMS) in manufacturing technology advances into the direction that machines become further versatile functionally and that tools are controlled by fast tool delivery device. Unlike conventional FMS to mainly focus on part flow, it is important to control tool flow in single-stage multimachine systems(SSMS), consisting of versatile machines and fast tool delivery device. This research is motivated by the thought that exact estimation of tool competition at part release in SSMS enhances the system performance. In this paper, in SSMS under dynamic tool allocation strategy to share tools among machines, we propose real-time part release and tool allocation algorithms which can apply real factory and which can improve system performance.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.139-150
• /
• 2010

Until now, the eco-friendly construction (green construction) has been focused on reducing environmental impacts in use(operation and maintenance) phase. Considering the environmental influence along the life cycle of construction project, the impact in execution phase is rather lower than that in use phase. However, that impact is thought to be greatly decreased by well-organized activities. Based on its urgency and requirement for timely action, this study aimed to discuss the greenhouse gas (GHG) reduction plan in execution phase from a broad perspective. To achieve this purpose, the green building rating systems in domestic and foreign countries have been reviewed, and the practice in Japan was investigated. In order to improve current on-site greenhouse gas management, the integration among construction phases, participants, and environmental factors, and institutional supports are required as well as the contractor's efforts.

• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.1
• /
• pp.57-69
• /
• 2011

Reliability means that a product maintains its initial quality and performance at certain period of time(time, distance, cycle etc) under given condition without failure. Given conditions include both environmental condition and operating condition. Environmental condition means common natural environment such as temperature, humidity, vibration, and working condition means artificial environment such as voltage, current load, install place, hours of use, which occurs during using the product. In the field of railway vehicles, although components of railway vehicles with reliability are the trend of mandatory as persisting period of railway vehicles is extended, using components of railway vehicles is insufficient for the practical reliability assessment. but the meaning of the first railway operating agency to acquire the parts in the field, the data suggest the reliability of products if you can and can show the reliability of modular units and modular units can provide the reliability of if you can present reliability of the entire system is thought to be here In this study, lifespan of micro-switch for master controller is analyzed and prediction is performed based on its field data considering the special circumstances of railway vehicles operating agency, such as a large number of trains operates on the same line.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.69-86
• /
• 2007

As most of firms related with P2P services change their free services into fee-charging services, the problems of intellectual property rights are solved to satisfactory extent. Accordingly, P2P systems become more popular with the general public. In this respect, it is thought to be very important to research on the critical factors affecting usage of P2P systems. Although it is strongly expected that the characteristics of users activities in virtual communities affect the intention to re-use P2P systems, relatively few attention have been paid to this question. Therefore, this paper is to present empirical evidence to explain how the characteristics of users activities in virtual communities affect re-use intention of P2P services. The theoretical contribution of this study is that the characteristics of users activities in virtual communities is theoretically derived from the comprehensive literature review and the logical reasoning, and that the research model of the relationship between the users activities' characteristics in virtual community and the re-use intention of P2P services is proposed and empirically validated, which is expected to expand explaining power of the TAM(Technological Acceptance Model). Also, the practical implication is to provide the guideline to support the successful strategic planning for development and.operation of P2P services through the virtual communities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.169-177
• /
• 2009

Concurrent Engineering (CE) has presented new possibilities for successful product development by incorporating various product life-cycle functions from the earlier stage of design. In the product design, geometric representation is vital not only in its traditional role as a means of communicating design information but also in its role as a means of externalizing designer's thought process by visualizing the design product. During the last dozens of years, there has been extraordinary development of computer-aided tools intended to generate, present or communicate 3D models. However, there has not been comparable progress in the development of 3D-CAD systems intended to represent and manipulate a variety of product life-cycle information in a consistent manner. In the previous research, the authors proposed a novel concept called Minus Volume (MV) to incorporate various design information relevant to product life-cycle functions. This paper proposes the use of the MV concept for the collaborative design environment, where many team members are geographically distributed over the networked environment, including Internet, Intranet, WWW, etc. A prototype 3D-CAD system is implemented based on the MV concept and illustrated with the successful implementation of collaborative design example.