• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.28-36
• /
• 2019

The APR1400 (Advanced Power Reactor 1400MW) nuclear power plant is a large-scale national infrastructure facility with a total project cost of 8.6 trillion won and a project period of 10 years or more. The total project area is about 2.17 million square meters and consists of more than 20 buildings and structures. And the total number of drawings required for construction is about 65,000. In order to design such a large facility, it is important to establish a design standard that reflects the design intent and can increase conformity between documents (drawings). To this end, a design bases document (DBD) reflecting the design bases that extracted in regulatory requirements (e.g. 10CFR50, Korean Law, etc.) is created. However, although the design bases are important concepts that are a big framework for the whole design of the nuclear power plant, they are managed in 2-dimensional by the experts in each field fragmentarily. Therefore, in order to improve the usability of building information, we developed BIM(Building Information Model) based 3-dimensional design bases management system. For this purpose, the concept of design bases information layer (DBIL) was introduced. Through the simulation of developed system, design bases attribute and element data extraction for each DBIL was confirmed, and walls, floors, doors, and penetrations with DBIL were successfully extracted.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.33-44
• /
• 2010

In this study, the possibility of utilizing carbide lime waste, obtained from the generation of acetylene process, as a alkali activator of blast furnace slag cement was investigated. The physical and chemical analysis of the carbide lime waste was studied and three types lime waste in order to investigate behaviour as alkali activator were used. Lime wastes were added 0, 10, 20 and 30 wt.% in blast furnace slag and blast furnace slag containing lime waste were added 0, 10, 30 and 50 wt.% in OPC. As a result of analysis of hydration properties, in the case of calcium hydroxide rehydrated after heat treatment at $800^{\circ}C$, it was higher hydration rate than other specimens. For the results of compressive strength test, when lime waste passed 325 mesh sieve and rehydrated calcium hydroxide were used, it was higher compressive strength than OPC from hydration 7days. At OPC50 wt.%-BFS45 wt.%-AA5 wt.% system using lime waste of 325 mesh under, the highest compressive strength appeared.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.3
• /
• pp.37-47
• /
• 2017

The geotechnical characteristics of frozen ground is one of the key design issues for the construction of infrastructure in cold region. In this study, the dynamic properties (shear modulus and damping ratio) of frozen and unfrozen soils sampled from Terra Nova Bay located in eastern Antarctica, where Jang Bogo station was built, were investigated using Stokoe-type resonant column test (RC). In order to freeze the reconstituted soil specimen, the RC testing equipment was modified by adding a cooling system. A series of resonant column tests were performed in frozen and unfrozen soils with various soil densities and temperatures. The shear modulus (G) and damping ratio (D) of soil frozen at $-7^{\circ}C$ were compared with those of unfrozen soil. In addition, the effect of temperature rise on the maximum shear modulus ($G_{max}$) and damping ratio was experimentally investigated. This study has significance in that the difference of dynamic soil properties between frozen and unfrozen soils and the effect of temperature rise on frozen soil were identified.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.515-525
• /
• 2016

Parameter analysis of a pretension girder bridge for urban maglev transit was performed to identify the main design parameters and their effect. Girder deflection at mid-span is the most important design criteria of urban maglev transit. Therefore, concrete compressive strength, girder height, girder length, and unbonded tendon length were selected as the design parameters that relate to girder deflection. In addition, tendon layout and unbonded tendon ratios were also considered as design parameters to control the top stress of the pretension girder section at the support. The analysis results show that both the girder height and length are dominant design parameters governing girder deflection, more important than compressive strength and unbounded tendon length. And, sensitivity analysis makes this study suggest design weight value. In terms of stress, a tendon layout that can satisfy the unbounded tendon rule requires an additional tendon or rebar at the upper section to control the tensile stress on top of the section. Therefore, to improve feasibility and constructability in the future, an enhanced unbonded tendon rule considering the load characteristics of the urban maglev system should be studied.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.45-55
• /
• 2013

Purpose - The development and implementation of OSS (Open Source Software) led to a dramatic change in corporate IT infrastructure, from system server to smart phone, because the performance, reliability, and security functions of OSS are comparable to those of commercial software. Today, OSS has become an indispensable tool to cope with the competitive business environment and the constantly-evolving IT environment. However, the use of OSS is insufficient in small and medium-sized companies and software houses. This study examines the need for OSS Intermediaries in the Software Distribution Channel. It is expected that the role of the OSS Intermediary will be reduced with the improvement of the distribution process. The purpose of this research is to prove that OSS Intermediaries increase the efficiency of the software distribution market. Research design, Data, and Methodology - This study presents the analysis of data gathered online to determine the extent of the impact of the intermediaries on the OSS market. Data was collected using an online survey, conducted by building a personal search robot (web crawler). The survey period lasted 9 days during which a total of 233,021 data points were gathered from sourceforge.net and Apple's App store, the two most popular software intermediaries in the world. The data collected was analyzed using Google's Motion Chart. Results - The study found that, beginning 2006, the production of OSS in the Sourceforge.net increased rapidly across the board, but in the second half of 2009, it dropped sharply. There are many events that can explain this causality; however, we found an appropriate event to explain the effect. It was seen that during the same period of time, the monthly production of OSS in the App store was increasing quickly. The App store showed a contrasting trend to software production. Our follow-up analysis suggests that appropriate intermediaries like App store can enlarge the OSS market. The increase was caused by the appearance of B2C software intermediaries like App store. The results imply that OSS intermediaries can accelerate OSS software distribution, while development of a better online market is critical for corporate users. Conclusion - In this study, we analyzed 233,021 data points on the online software marketplace at Sourceforge.net. It indicates that OSS Intermediaries are needed in the software distribution market for its vitality. It is also critical that OSS intermediaries should satisfy certain qualifications to play a key role as market makers. This study has several interesting implications. One implication of this research is that the OSS intermediary should make an effort to create a complementary relationship between OSS and Proprietary Software. The second implication is that the OSS intermediary must possess a business model that shares the benefits with all the participants (developer, intermediary, and users).The third implication is that the intermediary provides an OSS of high quality like proprietary software with a high level of complexity. Thus, it is worthwhile to examine this study, which proves that the open source software intermediaries are essential in the software distribution channel.

• Journal of Korean Port Research
• /
• v.7 no.1
• /
• pp.43-58
• /
• 1993

There has been fast progress in economy in Korea derived by a consecutive five-year plan program for economic development started in the early 1960's. In the field of transportation, rapid changes in the technological environment of transportation and communication have brought a revolution of the transport system, of which inter-modal transportation through containerisation is typical. Because of the rapidly growing traffic volumes of cargo, especially container traffic, and lack of investment into transport infrastructure in the past, both road and railway are beyond their capacity. As a result, the public-road network has suffered a serious congestion problem. For instance, in relation to the corridor between Seoul and Pusan, today, it takes about 14 hours for the journey of container trailer through Kyongbu Expressway, for which it used to take only 7 hours in 1986. For the railway, though the congestion problem is not very serious compared with the road sector, a shortage of capacity on certain main lines has emerged as a problem as railway traffic has increased. Furthermore, the further expansion of the system in near future is difficult due to burden of higher construction the cost. Unlike these two modes, coastal shipping, which has been paid relatively less attention for commodity transport in Korea, shows no constraint in this respect. In addition, it is the most cost efficient mode of transport. This work therefore aims to make a proposal for the alternative inland transportation mode, which is to promote the coastal transport of container. Three obstructing factors for the promotion of the coastal transport are investigated and some solutions for those are suggested as follows : First, it appears to be essential to provide exclusive ports for the coastal shipping, that comply with simplification, specialization and rationalization. The optimum size of berths on the exclusive ports in Pusan port is estimated as 16-20. We found that it needs periodical study and publicity on the advantages from the adoption of the coastal mode. Inducing competition in the coastal shipping market is also necessary. For the supply of the fleet in the coastal shipping, chartering of the surplus ships in the oversea shipping is found to be more desirable than new shipbuilding. Second, to solve the fragmentation of the companies which wish to participate in the coastal transport, government has to implement the subsidy policy. The encouragement of participation of the shipping lines engaging in Korea-Japan run and Korea-East South Asia run, into coastal shipping also needs to be considered cautiously. Third, simplification of the document for entry in ports is needed for rational coastal shipping management. We can use B/L (Bill of Lading) for coastal shipping as a prerequisite to get the indemnity by P & I Club. The reduction of the government controls on entering and leaving the ports also needs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.62-77
• /
• 2022

A cooperative driving automation system is imperative to overcome the limitation of the stand-alone automated driving technology. By definition, a cooperative driving automation system refers to a technology in which an automated vehicle cooperates with other vehicles or infrastructure to increase driving efficiency and safety. Specifically, in this study, the technical elements necessary for the cooperative driving automation technology and the technological research trends were investigated. Subsequently, implications for future cooperative driving automation technology development were drawn through the research trends. Finally, the importance of cooperative driving automation technology and infra-guidance service for automated vehicles were discussed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.479-499
• /
• 2019

State assessment of an operational tunnel is usually done by performing visual inspection and durability tests by following the detailed guideline for safety inspection (SI) and/ or precision inspection for safety and diagnosis (PISD). In this study, 12 NATM tunnels, which have been operational for more than 10 years, were inspected to figure out the cause of longitudinal cracks for the purpose of modifying the scoring items in the state assessment NATM tunnel related to the longitudinal crack and the thickness of concrete lining. All investigated tunnels were classified into four groups depending on the shape and usage of each tunnel. The causes of longitudinal crack occurrence were analyzed by investigating the correlations between the longitudinal crack and the following four factors: the patterns of ground excavation; construction state of primary support system; characteristics of material properties of the concrete lining; and thickness of lining which was obtained by Ground Penetration Radar (GPR) tests. It was found that influencing factors causing longitudinal cracks in the lining were closely related with the construction condition of the primary support system, i.e. shotcrete, rockbolt, and steel-rib; crack occurrences were not much affected by the excavation patterns. As for the properties of concrete lining materials, occurrence of the longitudinal crack was mostly affected by the following three items: w/c ratio; contents of cement; and strength of lining. When estimating the lining thickness of the concrete lining by GPR tests and taking thickness effect into account in the statement assessment, it was concluded that increase of the index score by an average of 0.03 (ranging from 0.01 up to 0.071) is needed; a more realistic way of state assessment should be proposed in which the increased index score caused by lack of lining thickness should be taken into account.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.80-88
• /
• 2020

With the issuance of one-week fine dust emergency reduction measures in March 2019, the public's anxiety about fine dust is increasingly growing. In order to assess the application of air purifying plant-based bio-filters to public facilities, this study presented a method for measuring pollutant reduction effects by creating an indoor environment for continuous discharge of particle pollutants and conducted basic studies to verify whether indoor air quality has improved through the system. In this study conducted in a lecture room in spring, the background concentration was created by using mosquito repellent incense as a pollutant one hour before monitoring. Then, according to the schedule, the fine dust reduction capacity was monitored by irrigating for two hours and venting air for one hour. PM₁₀, PM_2.5, and temperature & humidity sensors were installed two meters front of the bio-filters, and velocity probes were installed at the center of the three air vents to conduct time-series monitoring. The average face velocity of three air vents set up in the bio-filter was 0.38±0.16 m/s. Total air-conditioning air volume was calculated at 776.89±320.16㎥/h by applying an air vent area of 0.29m×0.65m after deducing damper area. With the system in operation, average temperature and average relative humidity were maintained at 21.5-22.3℃, and 63.79-73.6%, respectively, which indicates that it satisfies temperature and humidity range of various conditions of preceding studies. When the effects of raising relatively humidity rapidly by operating system's air-conditioning function are used efficiently, it would be possible to reduce indoor fine dust and maintain appropriate relative humidity seasonally. Concentration of fine dust increased the same in all cycles before operating the bio-filter system. After operating the system, in cycle 1 blast section (C-1, β=-3.83, β=-2.45), particulate matters (PM₁₀) were lowered by up to 28.8% or 560.3㎍/㎥ and fine particulate matters (PM_2.5) were reduced by up to 28.0% or 350.0㎍/㎥. Then, the concentration of find dust (PM₁₀, PM_2.5) was reduced by up to 32.6% or 647.0㎍/㎥ and 32.4% or 401.3㎍/㎥ respectively through reduction in cycle 2 blast section (C-2, β=-5.50, β=-3.30) and up to 30.8% or 732.7㎍/㎥ and 31.0% or 459.3㎍/㎥ respectively through reduction in cycle 3 blast section (C-3, β=5.48, β=-3.51). By referring to standards and regulations related to the installation of vegetation bio-filters in public facilities, this study provided plans on how to set up objective performance evaluation environment. By doing so, it was possible to create monitoring infrastructure more objective than a regular lecture room environment and secure relatively reliable data.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.4
• /
• pp.651-668
• /
• 2017

For initial stability of the tunnel, the primary support, Shotcrete and rockbolt shall be placed in the most appropriate time. This is because the role of such support plays a vital role in long-term and short-term tunnel stability. In this study, the rock bolt is an important supporting system that receives the external pressure generated by the stress relaxation during tunnel excavation as axial force and transmits it to the shotcrete on the tunnel excavation surface. Until now, most of the materials of rock bolts have been used in the field, but there have been many problems such as uncertain quality of Chinese materials entering the market, poor packing due to falling down of rock bolts when filled with mortar, and corrosion due to water. Therefore, in this study, we have developed a high strength steel pipe rock bolt using Autobeam material to solve and improve various problems of existing rock bolts. In order to evaluate the performance of the developed bolt, field tests were carried out and the existing mortar filler in order to improve the performance of the rock bolt, the design and construction criteria were studied and the results were included in this paper.