• 한국안전학회지
• /
• 제18권2호
• /
• pp.22-27
• /
• 2003

The roller machines installed in the industrial field are operated under hazardous conditions due to no safety devices available, human error during operation, defective safety devices, and inadequate regulation even in case that safety devices are provided. Up to now, most roller machines installed in domestic field are provides with band breaking system as a safety device. In this study, the emergency stop distance is measured within the limit of domestic regulation but violates a foreign regulation(EN1417). Consequently, it is concluded that the roller machines with a band breaking system have high possibility of death or serious injury of the operator and the system should be improved with the introduction of additional safety devices. This thesis suggests the safety measures suitable for the roller machines with different drive systems based on the experiment results. The use of the newly developed safety system has been tested on many cases.

• 한국항공운항학회지
• /
• 제28권4호
• /
• pp.182-186
• /
• 2020

As all flight training institutions in Korea were approved by the Ministry of Land, Infrastructure and Transport (MOLIT) as aviation training organizations (ATO), safety management based on the Aviation Safety Management System (SMS) became mandatory. However, even though safety management using SMS has become mandatory, the performance of aviation safety voluntary report, which is the core of the system, remains low compared to other countries. The current address of SMS, a ATO, is like a watermill without water. The present study is to find out why voluntary aviation safety reports, which is equivalent to water from waterwheel, is underperforming and to suggest ways to revitalize it.

• 시스템엔지니어링학술지
• /
• 제6권1호
• /
• pp.1-13
• /
• 2010

KC-100 is a 4 seats, single piston engine, civil aircraft whose type certificate is applied for KAS 23 (FAR 23) for the first time in Korea. Its system safety assessment and analysis have been conducted to meet the minimum safety requirement in KAS 23 and to verify the safety of equipment, system, and installation in accordance with the requirement of ${\S}$23.1309 and the guidelines in FAA AC 23.1309-1D and SAE ARP 4761. This safety assessment begins with the FHA (Functional Hazard Assessment) at aircraft and system level in preliminary design phase, and all of the safety assessment and analysis reports including the preliminary version of SSA (System Safety Assessment) have been prepared during detail design phase. The revised version of these safety reports will be approved by Airworthiness Authority through the ground and flight test phases. In this paper, the safety assessment requirement in ${\S}$23.1309, safety assessment guideline in AC 23.1309-1D, and safety assessment and analysis methods in ARP 4761 will be explained based on the application example for KC-100 development. The experience and knowledge of this system safety assessment for civil aircraft can be applied to commuter aircraft of FAR 23 class or large transport airplane of FAR 25 class.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1767-1773
• /
• 2016

Every year, lives are lost due to electrical safety accidents that could have been prevented with proper education and awareness of electrical safety. To prevent such accidents, experiential education is more effective than indoctrination education. This paper describes the electrical safety education system based on virtual reality (VR) and evaluates effect of the proposed system. Users operated the experiential electrical safety education system, and they were provided electrical stimulation in an electric shock experience using a haptic device. Appropriate stimulation values were calculated according to age (children vs. adults) and gender through experiment. The scenario in which participants experience electrical safety in the home environment was structured, and related educational contents was produced. A total of 68 healthy elementary students evaluated the educational effect of the system. The results showed that the educational effect and the sustainability of effect of the proposed system are superior to those of existing multimedia learning methods. By implementing electrical safety education stimulating the senses of human, the learning effect was promoted and this experiential education would be able to prevent electrical accidents.

• 한국항공운항학회지
• /
• 제24권2호
• /
• pp.59-67
• /
• 2016

The checklist currently used for Aviation safety inspection performed by ASIs consists of inspection groups and multiple items, it does not have structured hierarchy system which required to efficiently process aviation safety analysis. On this study, through mapping taxonomy of HFACS onto current checklist to secure structured hierarchy system and present a specification on systematic frequency and severity to perform safety risk assessment of detected hazard.

• 한국항공운항학회지
• /
• 제16권4호
• /
• pp.75-82
• /
• 2008

As the number of passengers and the amount of cargo is getting increased, the traffic of aircraft and moving vehicle at an airport is getting busy. Especially, due to the heavy traffic of moving vehicles in the area of airside, the safety management of them is getting important. The study has been performed for suggesting improved methods in order to reduce safety accidents between aircraft and moving vehicles by introducing a safety management system for moving vehicles in airside of an airport. In order to improve the level of safety with the efficient management of moving vehicles in airside, the analysis of the domestic and international trends of the related technology and regulations has been performed. As a result, the conceptual design of safety management system has been suggested by utilizing the location information technology and four layers (hardware, network, middleware and application) approaches of safety management system.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.55-63
• /
• 2012

The purpose of this study is to suggest new safety code to improve the safety of the flare safety system. Firstly, we analyzed the major accidents occurred at the flare system since 1996 and proposed 3 articles which is required to be added newly to the existing KOSHA code. Secondly, we also performed the HAZOP study for each study node and also suggested 5 articles. Finally, we analyzed the commented contents of PSM reports which have been submitted from the enterprise located in Honam province since 2005 and proposed 5 articles as well. We understand that all 13 articles proposed above, should be added to the KOSHA code in order to improve the safety in the flare system and to prevent the major fire and explosion accidents in the design stage.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.104-110
• /
• 2016

The effect of a partially earth anchored cable system on the structural safety of a long span cable-stayed bridge under seismic and wind loads are examined during construction process. By assuming the FCM (free cantilever method) construction stages with structural vulnerability, a multi-mode spectral analysis and a multi-mode buffeting analysis are performed for specific seismic load and wind load, respectively. Results show that the wind load dominates the structural safety of a cable-stayed bridge during construction. And, the application of a partially earth anchored cable system can enhance structural safety under wind load since the maximum pylon moment in the model with partially earth anchored cable system is reduced by 49% under wind load. In contrast, the maximum pylon moment occurred by seismic load is only decreased by 8%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.57-58
• /
• 2018

The number of deaths in the korean construction industry is more than three times the OECD average. Although safety management system should be improved to prevent the safety accidents, it is difficult to improve due to domestic safety conditions. Especially, in order to prevent accidents at construction sites, there is an increasing tendency to monitor the movement of workers and equipment in real time by introducing a location positioning system. Therefore, this study proposes a system that can monitor the position of workers and heavy equipments in real - time, detect danger and transmit alarms so that workers can pay attention to safety and keep safety. The system is expected to reduce safety accidents by transmitting alarms to workers so that they can pay attention.

• 대한안전경영과학회지
• /
• 제5권3호
• /
• pp.45-55
• /
• 2003

Construction Management(CM) system, which was introduced some years ago to large national construction projects, such as the construction of Incheon New Airport, construction of high-speed railroad and World Cup stadiums, is considered to be still in its early stage and safety at each step of CM is very poorly controlled. In an attempt to improve such inferior safety control of domestic CM, this study analyzed safety control operation system in CM home and abroad and suggested a model for the construction of safety control management information system suitable to the conditions of Korea.