• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.1-9
• /
• 2004

The general method which changes sub-cooling of refrigerant is to control the expansion valve in the state of mixing with liquid and gas phase. In this study, the performance of vehicle air conditioning system is to control either changing the expansion valve or adding the sub condenser. Therefore, this research finally is tested in case of the fourth test procedure, the second test was suitable for a valve opening area due to adjusting valve slope in comparison with the other test. The other test except for the second test happened to do liquid back due to the excessively liquified refrigerant into the system. In conclusion, the second test was appeared not to be influenced upon liquid back, and it is to expect positive performance by controlling an expansion valve. Therefore, it will be also useful to research for an increase of compressor efficiency Performance improvement of an air conditioner is to reinforce the suction performance of the evaporator and increase the sub-cooling, which make use of the sub-cooling system.

• 항공우주기술
• /
• 제4권2호
• /
• pp.50-59
• /
• 2005

본 연구에서는 개발된 테일팬 1차 시제품의 성능시험에 대한 것이다. 한국항공우주연구원에서는 헬리콥터용 반 토오크 시스템으로 테일팬 시스템을 개발하였으며, 제작된 1차 시제품의 성능시험을 위해 테일팬 성능시험장치를 제작하였다. 테일팬 성능시험을 위해 먼저 시험장치에 대한 제작 검증용 시험을 수행하였고, 다음으로 팬블레이드와 시험장치의 고유진동수를 확인하였다. 성능 시험용 시험장치 운용회전수를 결정하기 위한 운용시험을 수행하였다. 테일기어박스(TGB)에 가속도계를 부착하여 단계적으로 회전수와 부착물들을 변화시켜가며 고유진동수와 진동 레벨을 확인하였다. 운용시험 결과로부터 테일팬 성능시험용 시험장치 운용회전수를 결정하였고, 무풍조건과 비행 조건에 따른 성능시험을 수행하였다. 측정된 데이터는 무차원화하여 분석하였고, 이 결과로 개발 시제품이 성능 요구조건을 만족시킴을 확인할 수 있었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권1호
• /
• pp.17-23
• /
• 2015

With the increase in the risk of GPS jamming, the development and application of anti-jamming GPS techniques have been actively performed. As the objective performance verification of developed techniques is important, equipment development for verification and discussion on anti-jamming performance test method and procedure have also been conducted. However, most tests are related to the specification of equipment and therefore detailed procedure of the performance verification of an anti-jamming system needs to be developed. In this study, requirements for anti-jamming performance verification were described, and test configurations and performance evaluation items depending on three kinds of test methods (lab test, basic outdoor test, and chamber test) were suggested for anti-jamming performance verification.

• 시스템엔지니어링학술지
• /
• 제15권2호
• /
• pp.9-16
• /
• 2019

The most important task in acquiring the weapon system is to determine the required performance and to test & evaluate it. The importance of the weapon system by ROC (Required Operational Capability) is not considered, and system development and test evaluation are carried out. In addition, technical incidental performance is tested on the same basis as ROC in the test evaluation and determined according to the result. Development test and evaluation that evaluates technical ability is very important, but development agency is supervised and performed. In this paper, we propose a method to give weights considering the importance of ROC, a technical incidental performance determination and test procedure, and a improvement plan for the development and operational test & evaluation.

• 자동차안전학회지
• /
• 제7권2호
• /
• pp.25-31
• /
• 2015

This paper presents a performance evaluation procedure for advanced emergency braking (AEB) system. To guarantee the performance of AEB system, AEB test scenario should contains various driving conditions which can be occurred in real driving condition. Also, performances of each elements of AEB system, such as sensor, decision, human machine interface (HMI) and control, should be evaluated in various situations. For this, driving conditions, road types, environment, and elements of AEB system were introduced. Test scenario has been designed to represent the real driving condition and to evaluate the safety performance of AEB system in various situations. To confirm that the proposed AEB test scenario is realistic and physically meaningful, vehicle test have been conducted in two cases of proposed AEB test scenario: subject vehicle cut-out scenario and narrow street turn left scenario.

• 한국소음진동공학회논문집
• /
• 제16권8호
• /
• pp.857-863
• /
• 2006

This paper described the performance test and sound characteristics of helicopter 'Tail-Fan' anti-torque system. In this research, Korea Aerospace Research Institute(KARI) developed 'Tail-Fan' anti-torque system for a helicopter and carried out performance and sound capturing tests of even and uneven tail fans. The performance test is carried out and the noise signals which are generated during the test are saved with microphones at the same time. The performance test's results meet the design requirements. Tone-corrected perceived noise level is reduced by replacing the even product with the uneven one.

• 스마트미디어저널
• /
• 제10권3호
• /
• pp.54-59
• /
• 2021

항공기 개발과정 중 비행 계측장비를 통하여 획득된 비행 데이터는 항공기 개발 및 성능 개선에 중요한 역할을 한다. 따라서 비행 계측장비의 신뢰성 확보가 요구됨에 따라 비행 계측장비의 건전성을 점검하기 위한 점검 시스템이 매우 중요하다. 본 논문에서는 비행 데이터 계측장비의 기존 점검 시스템을 분석하여 점검 시스템의 하드웨어 및 소프트웨어 측면의 개선점을 제시한다. 이를 바탕으로 성능이 개선된 점검 시스템을 설계 및 구현하고, 시험 결과를 제시한다. 성능이 개선된 점검 시스템은 기존 점검 시스템보다 비용 절감과 유연한 적용, 그리고 유지보수성이 향상되었다. 따라서 계측장비의 건전성을 확보할 수 있어 비행 데이터의 신뢰성 향상을 기대할 수 있다.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1138-1143
• /
• 2011

One of the critical items in radar testing is the ability to evaluate the performance of radar systems under real operational environments. But it takes lots of time and cost to operate real targets and analyze the test results due to a large amount of data based on these complicated environments. In this paper, the Radar Simulative T&E Lab. is introduced, and the test and analysis results of the developing radar for predicting the radar system performance are described in the Radar Simulative T&E Lab. This laboratory could be used to test the far-field characteristics of antenna radiation pattern and to perform an effective radar system test and evaluation using a simulative target generator under a low cost repeating test situation.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.166-174
• /
• 2008

Recently, the automotive industry has been developing rapidly. With the progress parts of the automobile components need high quality and the reliability. Among them, braking unit is essential device, and acquire the reliability through the performance test of brake. This study was aimed to design the performance-test-bench to measure the drag torque which has effect on caliper in braking unit. In this progressive technology, it is vital importance to use hydraulic and pneumatic, and to combine test bench with instrumentation engineering technology. This system to construct the design of hydraulic and pneumatic circuit, interface technique between sensors and personal computer, data acquisition and display design, and integrated control are very important technology. Moreover, reliable data are obtained through vacuum system and hydraulic and pneumatic system by using of booster and brake master cylinder which are actually applied to automobile. Then, data signal detector sensors for speed, pressure and torque is attached on this system. Therefore, in this study, we designed a performance-test-bench by and we also made an total control system using personal computer which is more progressive and flexible method than existing PLC control.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.346-351
• /
• 2007

Dedicated outdoor air(DOA) system which conditions the outdoor air separately is superior to conventional cooling+reheating system with respect to energy consumption and indoor comfort. Since the sensible and latent load characteristics of indoor and outdoor are different, it is more efficient to treat them separately. In this study, cycle analysis and on-site performance test of DOA system have been conducted. The study shows that DOA requires 48.8% less equivalent energy that conventional system. The on-site performance test of the prototype shows that the coefficient of performance(COP) of the DOA system is 37.4% higher than the conventional system.