• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.27-33
• /
• 1996

In this study, a CAD/CAM system for axisymmetric deep drawing processes has been developed. An approach to the system is based on the knowledge based system. Under the environment of CAD/CAM software of Personal Designer, the system has been written in UPL. The geometries of intermediate and final object in deep drawing process, including processes parameters are input for the CAD/CAM system. The input data can be obtained from the results of Pro_Deep. The parts drawing of die sets for each process is generated in tool design module of the CAD/CAM system. Also. the die assembly drawings can be obtained. NC commands for machining of the part can be generated in the developed CAD/CAM system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.501-506
• /
• 2013

This research is to develop a simulation framework to gauge the mission effectiveness of the rotorcraft system that will be a part of Korean future combat system. The rotorcraft system comprises of many subsystems that are very time-consuming and tedious to model. Each subsystem and its characteristics have been modeled using component-based modeling techniques, which enhances its reusability. The entire system is then constructed from the individually modeled component, which significantly reduces the modelling time. The mission effectiveness of the rotorcraft system is simulated using the developed models, and the output indicates that the methodology proposed in this study is useful, which will be suitable for the modeling and simulation of Korean future combat system.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.15-21
• /
• 1997

In this paper, a self-activated cable spooling system for seaborne winch is developed . The system consists of a hydraulic servo driving unit and a cable position measurement mechanism. To realize the cable spooling system, it is carried out the mathematical modelling of the system and designed the proportional controller through the system aalysis and the simulation. The cable spooling system is tested and evaluated to validate the performance of the controller. The test results shows a good traceability of the cable spooling system under disturbance of cable tension.

• Journal of Environmental Science International
• /
• v.16 no.5
• /
• pp.623-632
• /
• 2007

The objective of this study is analysis of Andong-Dam lake water quality with water quality model. Model parameters of the WASP applied to Lake Andong-Dam were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating parameters by a trial-and-error procedure. Water qualify system for modeling consisted of BOD, DO, T-N, T-P. The results of water quality modelling using WASP. T-N was maximum affected by K71C(Organic nitrogen mineralization rate) parameter. T-P was maximum affected by K83C(Dissolved organic phosphorus mineralization) parameter, and It did not show a difference almost from the parameter of others and it omitted. BOD was maximum affected by Temperature parameter, it was visible of the reaction due to the KDC(Deoxygenation rate) in afterwords, and it did not show a difference from the parameter of others and it omitted. DO was maximum affect by Temperature parameter, and It did not show a difference almost from the parameter of others and it omitted. The parameter which it presumes from the this study uses a water quality modeling and Actual value and the result with which it compares, error rate the parameter presumption which is appropriate with 1% interior and exterior is investigated, It will reach and it uses and it will be able to apply to the suitable parameter in water quality modelling of the objective area which can be feeded by it becomes.

• Steel and Composite Structures
• /
• v.7 no.6
• /
• pp.487-502
• /
• 2007

In recent decades there has been a trend towards improved mechanical characteristics of materials used in footbridge construction. It has enabled engineers to design lighter, slender and more aesthetic structures. As a result of these construction trends, many footbridges have become more susceptible to vibrations when subjected to dynamic loads. In addition to this, some inherit modelling uncertainties related to a lack of information on the as-built structure, such as boundary conditions, material properties, and the effects of non-structural elements make difficult to evaluate modal properties of footbridges, analytically. For these purposes, modal testing of footbridges is used to rectify these problems after construction. This paper describes an arch type steel footbridge, its analytical modelling, modal testing and finite element model calibration. A modern steel footbridge which has arch type structural system and located on the Karadeniz coast road in Trabzon, Turkey is selected as an application. An analytical modal analysis is performed on the developed 3D finite element model of footbridge to provide the analytical frequencies and mode shapes. The field ambient vibration tests on the footbridge deck under natural excitation such as human walking and traffic loads are conducted. The output-only modal parameter identification is carried out by using the peak picking of the average normalized power spectral densities in the frequency domain and stochastic subspace identification in the time domain, and dynamic characteristics such as natural frequencies mode shapes and damping ratios are determined. The finite element model of footbridge is calibrated to minimize the differences between analytically and experimentally estimated modal properties by changing some uncertain modelling parameters such as material properties. At the end of the study, maximum differences in the natural frequencies are reduced from 22% to only %5 and good agreement is found between analytical and experimental dynamic characteristics such as natural frequencies, mode shapes by model calibration.

• Korean Journal of Remote Sensing
• /
• v.36 no.1
• /
• pp.1-13
• /
• 2020

Seasonal changes in river water vary seasonally as well as locationally, and the assessment is essential. In this study, we used the recent technique of post-classification by using the Google earth engine (GEE) to map the seasonal changes in Mahanadi river of Odisha. However,some fixed problems results during the rainy season that affects the livelihood system of Cuttack such as flooding, drowning of children and waste material deposit. Therefore, this study conducted 1) to map and analyse the water density changes and 2) to analyse the seasonal variation of river water to resolve and prevent problem shortcomings. Our results showed that nine types of variation can be found in the Mahanadi River each year. The increase and decrease of intensity of surface water analysed, and it varies in between -130 to 70 ㎥/nf. The highest frequency change is 2900 Hz near Cuttack city. The pi diagram provides the percentage of seasonal variation that can be observed as permanent water (30%), new seasonal (28%), ephemeral (12%), permanent to seasonal (7%) and seasonal (10%). The analysis is helpful and effective to assess the seasonal variation that can provide a platform for the development of Cuttack city that lies in Mahanadi delta.

• Korean Journal of Remote Sensing
• /
• v.36 no.1
• /
• pp.15-27
• /
• 2020

Accurate knowledge of land use/land cover (LULC) features and their relative changes over upon the time are essential for sustainable urban management. Urban sprawl growth has been always also a worldwide concern that needs to carefully monitor particularly in a developing country where unplanned building constriction has been expanding at a high rate. Recently, remotely sensed imageries with a very high spatial/spectral resolution and state of the art machine learning approaches sent the urban classification and growth monitoring to a higher level. In this research, we classified the Quickbird satellite imagery by object-based image analysis of Dempster-Shafer (OBIA-DS) for the years of 2002 and 2015 at Karbala-Iraq. The real LULC changes including, residential sprawl expansion, amongst these years, were identified via change detection procedure. In accordance with extracted features of LULC and detected trend of urban pattern, the future LULC dynamic was simulated by using land transformation model (LTM) in geospatial information system (GIS) platform. Both classification and prediction stages were successfully validated using ground control points (GCPs) through accuracy assessment metric of Kappa coefficient that indicated 0.87 and 0.91 for 2002 and 2015 classification as well as 0.79 for prediction part. Detail results revealed a substantial growth in building over fifteen years that mostly replaced by agriculture and orchard field. The prediction scenario of LULC sprawl development for 2030 revealed a substantial decline in green and agriculture land as well as an extensive increment in build-up area especially at the countryside of the city without following the residential pattern standard. The proposed method helps urban decision-makers to identify the detail temporal-spatial growth pattern of highly populated cities like Karbala. Additionally, the results of this study can be considered as a probable future map in order to design enough future social services and amenities for the local inhabitants.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.37-48
• /
• 2020

This study aimed at understanding trends of living lab studies and deriving implications for directions of the studies by utilizing text mining. The study included network analysis and topic modelling based on keywords and abstracts from total 166 thesis published between 2011 and November 2019. Centrality analysis showed that living lab studies had been conducted focusing on keywords like innovation, society, technology, development, user and so on. From the topic modelling, 5 topics such as "regional innovation and user support", "social policy program of government", "smart city platform building", "technology innovation model of company" and "participation in system transformation" were extracted. Since the foundation of KNoLL in 2017, the diversification of living lab study subjects has been made. Quantitative analysis using text mining provides useful results for development of living lab studies.

• Archives of design research
• /
• v.17 no.3
• /
• pp.421-430
• /
• 2004

The aim of this research is to develop communication model and tools that would help in incorporating user experience into information appliance product development. To do so, this research suggested three major modelling techniques, including user-experience model, design strategy model and experience product model. Using these modelling tools, any members in design teams (investigator and designers) will be able to communicate their own ideas and research results each other at any period of the product development process. Each tools have distinct factors that would help identify elements in the user research stages, idea generation stages and product development stages. To verify the efficiency of these models, the case study was conducted with final year students at their studio class. As a result, the benefit of using these tools were identified as 1) these tools accelerate the communication between user researchers, designers and engineers and 2) evaluation process of the product is much more dearer that before. and 3) various user research techniques can be explored.

• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.54-68
• /
• 1990

Contingency response in a FMS system requires that the system be able to identify and evaluate a number of alternatives. This paper is outlined that DSS completes with a problem processor in corporating Timed Petri Nets model, and a data base system. DSS enables the FMS user to get the maximum benefit from a FMS. The structure of this DSS parallels the organizational activities involved in running the FMS. In designing a shop floor controller for FMS, interactions between the different real time, discrete event functions must be established. The specification of the machine tool and material handling system functions working as a concurrent and cooperative system is given in terms of Timed Petri Nets. In addition, the basic concepts and uses of Petri Nets are surveyed. The system to be studied is first modelled by a Timed Petri Nets and then procedure for evaluating the FMS system performance are presented. Numerical examples are studied to illustrate a session of the FMS used-DSS interaction.