• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.818-823
• /
• 2016

Millimeter wave (mm-wave) communication systems provide high data rates owing to the large bandwidths available at mm-wave frequencies. Recently, analogue and digital combined beamforming, namely "hybrid beamforming" has drawn attentions owing to its ability to realize the required link margins in mm-wave systems. Taking into account the radio frequency (RF) hardware limitations, such as the analogue phase shifter gain constraint and the low resolution of the phase controller, we introduce an uplink hybrid beamforming system that includes discrete Fourier transform (DFT) based "fixed" analogue beamforming. We adopt a zero-forcing (ZF) multiple-input multiple-output (MIMO) equalizer to eliminate the uplink inter-user interferences. Moreover, to improve the sum-rate performances, we propose a transmit beam selection algorithm which makes the uplink effective channels, i.e., the beamformed channels, become near orthogonal. The effectiveness of the proposed beam selection algorithm was verified through numerical simulations.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.187-193
• /
• 2020

This study analyzed how risk factors in management affect the management of working capital in general hospitals in Korea. The data used accounting information for three years (2016~2017 and 2018) of 271 general hospitals using the medical institution accounting information disclosure system. The independent variables were the working capital level and the cash conversion cycle, The dependent variables were operational risk and market risk, Control variables were selected as components of working capital(cash, accounts receivable, inventory assets, accounts payable). According to the study, the lower the operational risk, the higher the level of working capital hospitals in Korea. Working capital decisions were confirmed to be attributable to operating risks, cash, inventory assets and accounts payable. And the lower the market risk (Operating Margin), the higher the cash conversion cycle. Therefore, it is necessary to review appropriate management measures of operational risks, cash, inventory assets and accounts payable identified as operating capital determinants so that medical institutions can also have economic response capabilities in consideration of the specificity of their operations.

• The Korean Journal of Zoology
• /
• v.37 no.1
• /
• pp.49-57
• /
• 1994

In the course of an investigation on the morphological variation of Korean striped bittering, Acheilognathus vamatsutae Mori, two kinds of morrholoflical types were found. Some morphological characters were compared between them and multivariate analysis was conducted. Since the difference of the barbel length between them was very significant (p < 0.01,1-test), they should be designated as L-and 5-type Hshes: fishes with long barbels and those with should barbels, respectively. Lateral line scales, snout length and prepectoral length showed a tendency that the observation could be distinguished from each other (p < 0.05, Duncan's multiple range tests. There were no individuals over 70 mm BL in S-type and so S-type fishes were somewhat dwarf than L-type fishes. The two types were also clearly distinguished by multivariate analyses using cluster and discriminant analyses. According to the observation on the four populations of the Naktong River, the blue-green stripe on the body side and the white band on the margin of anal fin in males of S-type fishes were well developed through the year but those of males of L-type fishes completely disappeared or became slender during nonbreedins season as that of females. Of the seven localities surveved, there were no places that the two types cohabit. S-type fishes are limited only in the Kumho and Wichon River of the Naktong River system but L-type fishes are distributed more widely In the Hongchon, Mangvons, Somjin, Mirang and Panbyon River.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.65-75
• /
• 2005

Moving-objects databases should efficiently support database queries that refer to the trajectories and positions of continuously moving objects. To improve the performance of these queries. an efficient indexing scheme for continuously moving objects is required. To my knowledge, range queries on current positions cannot be handled by the 3D R-tree and the TB-tree. In order to handle range queries on current and past positions. I modified the original 3D R-tree to keep the now tags. Most of spatio-temporal index structures suffer from the fact that they cannot efficiently process range queries past positions of moving objects. To address this issue. we propose an access method, called the Tagged Adaptive 3DR-tree (or just TA3DR-tree), which is based on the original 3D R-tree method. The results of our extensive experiments show that the Tagged Adaptive 3DR-tree outperforms the original 3D R-tree and the TB-tree typically by a big margin.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.105-112
• /
• 2002

In this paper, a servo filter design for the gimbal engine actuator system of KSR-III(Korea Sounding Rocket-III) is considered. A reasonable filter structure is determined based on the actuator analytic models. The servo filter consists of a 2-nd order lowpass filter and a 1-st order compensator. The lowpass filter is required to protect the actuator from high frequency vibration, and the compensator to enhance the resulting stability. A Butterworth type servo filter is considered as the simplest one. The final servo filter type is determined by evaluating simultaneously both high frequency gain reduction performance and the corresponding KSR-III stability margin. Consequently it is revealed that a notch type servo filter located on the error between command signal and feedback signal in the control loop is very effective. Later, based on the proposed servo filter type, an onboard servo filter hardware of KSR-III will be designed and tested.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.119-126
• /
• 2003

The size of low voltage level conductor cables can be installed with a long length just like a aviation field, shall be determined for considering the ampacity of cable and the drop of voltage for the power system. Therefore, The size of the conductor cables may be larger one for considering the tolerable voltage drop comparatively, although the allowable ampacity of the conductor cables may have a margin in comparison with the rated full load current In this case, the conductor cables' allowable ampacity will be very larger than the rated full load current and the generated heat of the conductor will be relatively downed. The conductor cables' alternating current resistance corrected with the maximum allowable temperature of the conductors, has been applied on the general formula for the calculating the voltage drop in determinating the size of low voltage level conductor cables, and the resistance is larger than the resistance corrected with the actual temperature of the conductor cables. This paper was studied for the purpose of the conductor resistance corrected with the actual temperature rise of the conductor and address the economic design formula so that this studies shall minimize the errors which can be occurred in comparison with the general formula and which can be applied in design work for determining the size of low voltage level conductor cables.

• Journal of Embryo Transfer
• /
• v.32 no.3
• /
• pp.183-192
• /
• 2017

The mammary gland tumor (MGT) is the most common neoplasia in intact female dogs. Of these, 50% are malignant and metastasis to the other sites are often occurred. Therefore, it is very important for decision of treatment plan and prognosis to differentiate benign tumor from malignancies. Calcification of MGT is a very important imaging finding. The purpose of this study was to investigate the radiological and computed tomographic images of the MGT and the morphology and distribution of calcifications in the MGT using the Breast Imaging Reporting and Data System classification. A total of 42 dogs with MGT were included in this study. The dogs were divided into two groups into benign and malignant groups based upon histologic or cytologic results. The appearance of calcification in the tumor on radiographs and CT images was analyzed for the HU value of pre- and post-contrast injection, margin, surface, and shape of the tumor and the lymph node abnormalities. On radiographs, the positive predictive value of malignant and benign tumors was 72.72 and 85.71%, respectively. On CT examinations, the positive predictive value of malignant and benign tumors was the same value of 83.33%. The maximum diameter of the tumor and the presence of abnormal lymph nodes on CT images showed a strong correlation with malignancies. Therefore, it is thought that radiographs and CT provide useful information for evaluating MGT in dogs.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.99-105
• /
• 2011

An integrated model for groundwater flow and radionuclide transport analyses is being developed incorporating six underground silos, an excavated damaged zone (EDZ), and fractured host rock. The model considers each silo as an engineered barrier system (EBS) consisting of a waste zone comprising waste packages and disposal container, a buffer zone, and a concrete lining zone. The EDZ is the disturbed zone adjacent to silos and construction & operation tunnels. The heterogeneity of the fractured rock is represented by a heterogeneous flow field, evaluated from discrete fractures in the fractured host rock. Radionuclide migration through the EBS in silos and the fractured host rock is simulated on the established heterogeneous flow field. The current model enables the optimization of silo design and the quantification of the safety margin in terms of radionuclide release.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.469-472
• /
• 2008

In this paper, we discuss the recent trends on the passive UHF RFID tag chip design techniques and several important system parameters. We also summarize link budget studies on both conventional and modem UHF RFID communications. The paper highlights the reverse link limited case, which has known to be the minor concern if reader continuous wave (CW) can reach the tag in sufficient level. This makes sense when the tag sensitivity is rather high (over 10-12${\mu}W$); however, since the tag chip fabrication technologies have been developed by time, the tag chip threshold levels are now less-dominant in determining link margin. If the tag limitation can be alleviated, the forward link limited case can be resolved; thus, we rather focus on the path-loss problem. Since the path-losses are still exist in both forward and reverse links, and it can be doubled while CW travels the reader-tag-reader path because forward link and reverse link are on the same distance. Consider if reader receiver sensitivity is very high in the worst case. In this case, weaken tag response (i.e., backscatters) cannot reach the level that reader receiver can process tag data; bit-error rate can be higher. Overall, backscatter levels should be high enough so that reader receiver can correctly function. After discussing link budget, we carried out practical measurements on fading effects between two circularly polarized UHF RFID antennas in a small scale area.

• Restorative Dentistry and Endodontics
• /
• v.26 no.6
• /
• pp.464-484
• /
• 2001

When restoring a tooth, the dentist tries to choose the ideal material for existing situation. One criterion that is considered is its suitability for restoring coronal strength. As more tooth structure is removed, the cusps are weakened and susceptible to fracture. Further, this increased deformation may cause the formation of intermittent gaps at the margin between the hard tissue and the restoration, facilitating marginal leakage. The improvements in ceramic materials now make it possible for alternatives to amalgams, composites, and cast metal to be of offered for posterior teeth. Of the materials used, ceramics most closely approximates the properties of enamel. The introduction of computer-aided design/computer-aided manufacture(CAD/CAM) systems to restorative dentistry represents a major technological breakthrough. It is possible to design and fabricate ceramic restorations at a single appointment. Additionally, CAD/CAM systems eliminate certain errors and inaccuracies that are inherent to the indirect method and provide an esthetic restoration. The aim of this investigation was to study the loading characteristics of CAD/CAM ceramic inlay and to compare the stress distribution and displacement associated with different designs of cavity(the isthmus width and cavity depth). A human maxillary left first premolar was prepared with standard mesio-occlusal cavity preparation, as recommended by the manufacturer Ceramic inlay was fabricated with CEREC 2 CAD/CIM equipment and cemented into the prepared cavity. Three dimensional model was made by the serial photographic method. The cavity width was varied $\frac{1}{3}$, $\frac{1}{2}$ and $\frac{2}{3}$ of intercuspal distance between buccal and lingual cusp tip. The cavity depth was varied 1.5mm and 2.3mm. So six models were constructed to simulate six conditions. A point load of 500N was applied vertically onto the first node of the lingual slope from the buccal cusp tip. The stress distribution and displacement were solved using ANSYS finite element program(Swanson Analysis System). (omitted)