• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.577-581
• /
• 2006

Urban transit operation corporations perform repetitive work to investigate the EMU, electric multiple unit, by some fixed maintenance cycle. The quality of maintenance work usually depends on workers' know-how. Though some information to support the maintenance work is digitalized and provided to workers, it is not great help to them because of its non systematic structure. The information includes drawings, manuals, work results, work history, fault history, etc. The maintenance workers want to access the information anytime anywhere, and make an effect to promote the efficiency of maintenance for EMU. But it is difficult to achieve that without some structured information system which is able to use in work area. So we develop maintenance information system for EMU for about 4 years from 2002 to 2005. In this paper we present the configuration and characteristics of this system, and the results of the evaluation test. We install the system in two depots, Changdong and Jichuk, belonged to SeoulMetro to evaluate its efficiency and estimate its economic benefits.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.676-682
• /
• 2007

In this paper we introduce the Failure Management System for AREX's Signalling System which is applied by RAMS management. The corrective action report is classified into 3 group, scheduled maintenance, non-scheduled maintenance and the reported failure maintenance. The scheduled maintenance is for the failure detected by periodic inspection and it is concerned as the Preventive Maintenance. The reported failure maintenance is for the failure reported by non-maintenance staff and non-scheduled maintenance includes all corrective action except the works of the previous 2 group. RAMS analysis is based on the FRACAS data connected with the corrective action reports. AREX computerize the all process by the Facility Management System of Integrated Information System.

• 항공우주시스템공학회지
• /
• 제10권2호
• /
• pp.27-33
• /
• 2016

For the continued airworthiness of aviation products, aviation authority requires that every manufacturer should provide ICA(Instruction of Continued Airworthiness) to their users, and the users should follow it by themselves or using another approved maintenance agent. To reduce the cost and improve performance quality of maintenance activities, lots of users tries to outsource this job. To perform maintenance or repair of other owned air products, an air carrier and aviation maintenance companies should obtain AMO(approval of maintenance organization). It means AMO is a postulation to enter MRO(Maintenance Repair and Overhaul) market. For that, this paper discusses the comparison of requirements and procedures of AMO system between Korea and US to help understand the AMO system, and then, tries to point out what improvement should be made to Korean AMO system to be more effective, efficient and safe.

• 산업경영시스템학회지
• /
• 제20권41호
• /
• pp.167-175
• /
• 1997

This study is concerned with Quality Maintenance System in Total Productive Maintenance. The important factor in manufacturing process is to attain the uniformity of quality Also quality assurance system is defined such as manufacturing process and products. In this paper, the design of quality maintenance system is considered to manufacturing process elements. Especially the manufacturing process is oriented to machinery equipments, repair and maintenance system is wide principal factor. And quality in manufacturing field is influenced by equipment maintenance system. So in the article, maintenance system for quality is given in a view of quality assurance. And the analysis of Physical Mechanism is explored in real field example.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.151-159
• /
• 2018

Maintenance activities are regarded as a key part of the repairable deteriorating system because they maintain the equipment in good condition. In practice, many maintenance policies are used in engineering fields to reduce unexpected failures and slow down the deterioration of the system. However, in traditional maintenance policies, maintenance activities have often been assumed to be performed at the same time interval, which may result in higher operational costs and more system failures. Thus, this study presents two non-periodic preventive maintenance (PM) policies for repairable deteriorating systems, employing the failure rate of the system as a conditional variable. In the proposed PM models, the failure rate of the system was restored via the failure rate reduction factors after imperfect PM activities. Operational costs were also considered, which increased along with the operating time of the system and the frequency of PM activities to reflect the deterioration process of the system. A numerical example was provided to illustrate the proposed PM policy. The results showed that PM activities performed at a low failure rate threshold slowed down the degradation of the system and thus extended the system lifetime. Moreover, when the operational cost was considered in the proposed maintenance scheme, the system replacement was more cost-effective than frequent PM activities in the severely degraded system.

• International Journal of Railway
• /
• 제1권2호
• /
• pp.59-63
• /
• 2008

The maintenance effect is a peculiar factor applied to repairable systems such as rolling stocks. Conventional statistical analysis for failure times takes into account one of the two following extreme assumptions, namely, the state of the system after maintenance is either as "good as new" (GAN, perfect maintenance model) or as "bad as old" (BAO, minimal maintenance model). Most of the papers concerning the stochastic behavior of railroad systems assume two types of maintenance: perfect and minimal maintenance. However, Lee, Kim & Lee (2008) analyzed the failure data of a door system in Metro EMU and the effect of preventive maintenance was imperfect. It is seen that the imperfect maintenance is of great significance in practice. This article describes how to deal with the maintenance effect in reliability studies of rolling stocks. Maintenance policies under imperfect maintenance are described and the method is proposed to evaluate their performance.

• 한국군사과학기술학회지
• /
• 제24권4호
• /
• pp.449-456
• /
• 2021

Impatience characteristics are an important factor to be considered in the defense field, which is sensitive to time, but there are not many cases applied. In addition, due to the difficulty of analysis that must consider various probabilistic factors (breakdown/maintenance distribution, impatience characteristics, etc.), military decision makers consider only simple data (number of occurrences per year, maintenance time, etc.) Therefore, in this study, a model capable of analyzing the performance of the emergency maintenance system for determining the appropriate size and organization of military and civilian maintenance personnel was presented in consideration of impatience characteristics and probabilistic factors. And through numerical analysis, the appropriate size of the military and civilian emergency maintenance teams was analyzed. This study is significant in that it can improve readiness of operational power and prevent waste of defense budget through efficient operation of the military's emergency maintenance system.

• 한국경영과학회지
• /
• 제6권2호
• /
• pp.7-11
• /
• 1981

An inspection-maintenance policy is investigated for a system having various states. A policy is characterized by the type of maintenance and the next inspection time. Maintenance actions are classified into various types according to the depth of maintenance. Policy evaluation criterion is the expected cost accumulated up to the failure of the system. The problem is formulated as a Markov decision process and an optimal policy is found by using a policy improvement procedure. A numerical example illustrates the policy for a system having five states.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.105-110
• /
• 1990

Effective maintenance system for national highway bridges has been requested due to increasing numbers of bridges. In this study, bridge data base is established in accordance with rating criteria for the structural conditions and functions of bridges. Maintenance system using PC-80386 hardware and ORACLE software is developed to rank the priority of either reconstruction or repairing of bridges and to provide with those information to bridge maintenance staff in order to perform bridge maintenance effectively. With this pre-establised data base and computerized maintenance system, data and information for planning of bridge construction could be obtained in times.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.922-928
• /
• 2002

This paper is about the maintenance CALS system development and construction for the urban transit railway. The operation companies of urban transit railway are driving to construct the maintenance CALS system individually. So, there are concerned problems of duplication investment and waste of budget in the national aspect, inefficient CALS system construction, and etc. In order to resolve that, the KRRI is driving to development and construction of the standardized maintenance CALS system for the urban transit railway. This paper describes the result of basic design of the standardized maintenance CALS system using the CBD development method.