• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.315-324
• /
• 2015

In this study, we prepared liquid crystal emulsion composed of amphiphilic substance $C_{14-22}$ alcohol, $C_{12-20}$ alkyl glucoside, behenyl alcohol and studied liquid crystal emulsion of properties and in vitro skin permeation. The results of formulation experiments, the clear liquid crystalline structure was observed in the ratio of $C_{14-22}$ alcohol 0.8%, $C_{12-20}$ alkyl glucoside 3.2%, behenyl alcohol 4% in the formulation. The results of physical property measurements, the viscosity of liquid crystal emulsion and O/W emulsion applied as a control group was respectively $1871.26{\sim}1.15Pa{\cdot}s$, $1768.69{\sim}1.14Pa{\cdot}s$ and the shear stress of O/W emulsion was 178.68 ~ 909.18 Pa, that of liquid crystal emulsion was 190.45 ~ 919.38 Pa. The storage modulus of O/W emulsion was 3428.53 ~ 9157.45 Pa, that of liquid crystal emulsion was 4487.82 ~ 8195.59 Pa. The tan (delta) value of O/W emulsion which means a ratio of viscosity to elasticity was 0.43 ~ 0.19, and that of liquid crystal emulsion was 0.23 ~ 0.25. The water content value on the skin for liquid crystal emulsion was significantly higher from 1 h to 6 h compared with that of O/W emulsion and the transepidermal water loss on the skin was significantly superior in skin moisture loss suppression from 30 min to 4 h compared with that of O/W emulsion. The results of skin permeation using glycyrrhizic acid, the result of skin permeation amount of liquid crystal emulsion for 24 h was $64.58{\mu}g/cm^2$, that of O/W emulsion was $37.07{\mu}g/cm^2$, that of butylene glycol solution was $41.05{\mu}g/cm^2$. Hourly permeability results, it is showed that skin penetration effect of the liquid crystal emulsion increases after 8 h. These results suggest that liquid crystal emulsions are effective for skin moisturizing effect and function as potential efficacy ingredient delivery system for the transdermal delivery.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.1
• /
• pp.33-38
• /
• 1976

As a basic studies for increasing food production utilizing sandy barren lands and sandy farmlands of low productivity which distributed widely in Korea, an experiment of growing rice-plant on sandy barren land was undertaken as follows. 1. Variety, IR-667 was adopted and the growing method was a nutrient-irrigation culture which aimed to minimize percolation loss in sand with an automatic contineous supplying nutrient solution for supplmenting the sand characteristics. 2. The growth type price-plant after heading was a typical higher yield plant, that is, numerous, small, narrow, and thickend leaves, straight attitute, dense fasciculated etc. though the rooting of plant after planting was delayed because of using paddy-field grown seedling. 3. The adaptability of rice-plants on sandy land seemed to be different by varieties and IR-667 was more adaptable than ordinary Japonica varieties. 4. Even at the period of heading and maturing, the root system of rice-plant grown on sand showed vigorous growth having more activated apical portions. while, even the lower leaves showed flourished state. 5. The suppling of calcium and magnecium in addition to nitrogen, phosphorus and potassium on sand made notable increase of stem number per plant, grain number per stem and yields.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.325-335
• /
• 1985

Biogas production from agricultural wastes were summarized as follows: 1. Biogas Generation Characteristics of Various Manures and Residues a. Gas yield from crop residues like rice straw, rice hull, corn stalk and coconut husk can be improved by addition of animal manures. b. Gas yield from coconut husk can be improved through aerobic fermentation for at least one week before loading in the digester. c. Gas yield from fresh rice straw is better than from pre-fermented one, whether alone or in combination with animal manures. d. Initial study has shown that fresh azolla can be substituted for animal manures in manurerice straw combinations and gas yield derived based on unit volatile solids loaded is actually better than for manure-residue combinations. e. Gas production is highly sensitive to substrate pH and becomes almost nil at a pH of below 6. 2. Effect of ambient conditions and other factors on biogas production in a house hold-size digester. a. Results showed that compaction of rice straw in straw-manure combination can reduce gas yield compared with loosely mixed straw. b. The effective gas production period extended to 70 days using freshly threshed rice straw and fresh cattle manure as feed material. c. Underground and above ground digesters with shade have relatively more stable substrate temperature than aboveground exposed digesters. This relative temperature instability may likely be the reason for lower gas yield for the exposed aboveground digester loaded with loose straw-cattle manure substrate, compared with the underground digester with the same substrate. 3. Economic Analysis a. Based on prevailing costs of fuel, materials, and labor in the Philippines, biogas produced from the household size system is cheaper than either LPG or kerosene. b. If other benefits like organic fertilizer, pollution control and convenience are considered, biogas will surely be the best alternative fuel source.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2001

Total upland area for cultivating the vegetable crops in the Alpine soils of Northeastern South Korea has been extending its limit to meet the increasing demand of vegetable food in recent decades. About 70% of these alpine soils are located in over 7% of the slope and most of vegetable crops have been cultivated intensively without practicing the best management systems. Thus, soil erosion and continuous cropping system have degenerated the soil fertility and shown detrimental effects on water quality. We initiated an intensive and extensive investigation to characterize the fertility problems encountered in these uplands. Objectives of this paper were to characterize the fertility status in the Alpine soils cultivated with vegetable crops for many years and to provide the recommendations for adequate soil management measures including fertilization and erosion control. Soils in general have good drainage with textural classes of loam or sandy loam. Their topographical characteristics tended to lead them to shallow plow layers, and the steepness of the terrain created erosion hazard. Of the soils examined, about 11% of uplands over 30% gradient was found in need of an urgent reforestation. A high content of gravel and firm hardness of soil attributed to inhibit the utilization of farm machinery and plant-root development. The average soil pH 5.6 was slightly low relative to pH 5.70 of the national average. Organic matter content was high compared with 2.0% of national average, but decreased with the prolonged cultivation periods. Available $P_2O_5$ concentration was unusually high due to the consequence of over dose application with chemical and organic fertilizers. Exchangeable cations as Ca, Mg, and K were appeared to be decreased in these regions with prolonging the cultivation periods. There were no significant differences in cation exchange capacity (CEC) and electrical conductivity (EC) among locations. Heavy metal contents were mostly lower than the threshold of danger level designated by Soil Environment Conservation Law of South Korea. Results indicated that a proper countermeasure and the best management practice should be immediately implemented to conserve the top soil and fertility in the Alpine regions.

• Korean Journal of Psychosomatic Medicine
• /
• v.23 no.2
• /
• pp.93-99
• /
• 2015

Objectives : The purpose of this preliminary study was to investigate job stress and stress coping strategy among workers in a regional statistics office. Methods : A total of 133 workers in regional statistics office participated in this study and they were divided into two groups, survey group(n=109) and support group(n=24) depending on relation to statistical survey task. They were asked to respond to Short Form of Korean Occupational Stress Scale(KOSS-SF) and Stress Coping Strategy(SCS) to investigate sociodemographic characteristics, job stress, and stress coping strategy. Results : The proportion of the 133 participants in the sample was 59(44.4%) of men, 74(55.6%) of women. There were no significant differences in KOSS-SF scores in relation to age, sex, education, and marital status, while the KOSS-SF scores were significantly different between the two groups. In regard to the subscales of KOSS-SF, the two groups had significant differences in insufficient job control, interpersonal conflict, job insecurity, and organization system. In addition, the total score of KOSS-SF had a negative correlation with problem-focused coping strategy and social support coping strategy of SCS. Conclusions : Our results suggest that workers of survey group had more job stress compared to those who works in support group in regional statistical office. In addition, in comparison with workers of support group, both men and women of survey group get stressed when they were confronted with interpersonal conflicts. Our results suggest that using problem-focused coping and social support coping strategy lowers job stress.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.192-211
• /
• 2021

In Seongju, Gyengsangbuk-do, the Placenta Chamber (胎室, Taesil) of 18 sons and a son of the crown prince of King Sejong(世宗大王) is located in one place. Taesil refers to the place where the umbilical cord and placenta, which are separated when the baby is born, are placed in a jar made of pottery and stone box and then buried on the ground. The placenta chamber in Seongju has the Buncheong ware (粉靑沙器) cover buried on the ground to protect the baby's placenta. These covers are all hemispherical, with a diameter of more the 20cm. The decorations were made using black and white inlaid techniques only on the outside. The Buncheong ware cover with this shape and pattern has been confirmed only in the placenta chamber in Seongju. This study targets 6 of the Buncheong ware cover whose owners were identified, when and where they were prepared, what the stylistic features and meanings are, and where it was produced. The results of the study are as follows. First, ss a result of reviewing the production background and procurement system of this bowl, it was inferred that it was sourced from Jangheunggo (長興庫) at the central government office, between 1436 and 1439, when the event to bury the placenta of royal members in the ground was the most active. Second, it analyzed the unique features of this cover, such as the shape, pattern, and baked traces. The shape and pattern were compared to the ritual objects contained in the Sejong Silok Oryeui (『世宗實錄』 「五禮」, Five Rites of King Sejong Chronicle) and the lid of the royal placenta jar made in the 15th and 16th centuries. Third, this study suggests that the baking method was based on the shape and location of the traces remaining outside the cover. Finally, the following data were used to estimate the production site: the relationship with the 'Jagiso (磁器所, ceramic workshop) registered in the Sejong Silok Jiriji (『世宗實錄』 「地理志」, Geographical Appendix of King Sejong Chronicle); various records of contribution and dedication about the Buncheong ware made here; and the Buncheong ware and related tools excavated from the kiln site in the area. The place where the Buncheong ware cover was produced is estimated to be the most likely production site for the kiln site in Chunghyo-dong Kiln Site, located in Jeolla-do province by synthesizing the data above.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1135-1147
• /
• 2021

In order to geometrically correct high-resolution satellite imagery, the sensor modeling process that restores the geometric relationship between the satellite sensor and the ground surface at the image acquisition time is required. In general, high-resolution satellites provide RPC (Rational Polynomial Coefficient) information, but the vendor-provided RPC includes geometric distortion caused by the position and orientation of the satellite sensor. GCP (Ground Control Point) is generally used to correct the RPC errors. The representative method of acquiring GCP is field survey to obtain accurate ground coordinates. However, it is difficult to find the GCP in the satellite image due to the quality of the image, land cover change, relief displacement, etc. By using image maps acquired from various sensors as reference data, it is possible to automate the collection of GCP through the image matching algorithm. In this study, the RPC of KOMPSAT-3A satellite image was corrected through the extracted matching point using the UAV (Unmanned Aerial Vehichle) imagery. We propose a pre-porocessing method for the extraction of matching points between the UAV imagery and KOMPSAT-3A satellite image. To this end, the characteristics of matching points extracted by independently applying the SURF (Speeded-Up Robust Features) and the phase correlation, which are representative feature-based matching method and area-based matching method, respectively, were compared. The RPC adjustment parameters were calculated using the matching points extracted through each algorithm. In order to verify the performance and usability of the proposed method, it was compared with the GCP-based RPC correction result. The GCP-based method showed an improvement of correction accuracy by 2.14 pixels for the sample and 5.43 pixelsfor the line compared to the vendor-provided RPC. In the proposed method using SURF and phase correlation methods, the accuracy of sample was improved by 0.83 pixels and 1.49 pixels, and that of line wasimproved by 4.81 pixels and 5.19 pixels, respectively, compared to the vendor-provided RPC. Through the experimental results, the proposed method using the UAV imagery presented the possibility as an alternative to the GCP-based method for the RPC correction.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1447-1460
• /
• 2021

Urbanization increases the amount of impervious surface and artificial heat emission, resulting in urban heat island (UHI) effect. Local climate zones (LCZ) are a classification scheme for urban areas considering urban land cover characteristics and the geometry and structure of buildings, which can be used for analyzing urban heat island effect in detail. This study aimed to examine the UHI effect by urban structure in Suwon and Daegu using the LCZ scheme. First, the LCZ maps were generated using Landsat 8 images and convolutional neural network (CNN) deep learning over the two cities. Then, Surface UHI (SUHI), which indicates the land surface temperature (LST) difference between urban and rural areas, was analyzed by LCZ class. The results showed that the overall accuracies of the CNN models for LCZ classification were relatively high 87.9% and 81.7% for Suwon and Daegu, respectively. In general, Daegu had higher LST for all LCZ classes than Suwon. For both cities, LST tended to increase with increasing building density with relatively low building height. For both cities, the intensity of SUHI was very high in summer regardless of LCZ classes and was also relatively high except for a few classes in spring and fall. In winter the SUHI intensity was low, resulting in negative values for many LCZ classes. This implies that UHI is very strong in summer, and some urban areas often are colder than rural areas in winter. The research findings demonstrated the applicability of the LCZ data for SUHI analysis and can provide a basis for establishing timely strategies to respond urban on-going climate change over urban areas.

• 한국사회정책
• /
• v.25 no.2
• /
• pp.367-402
• /
• 2018

This study analyzed the relationship between the act on the guarantee of rights of and support for persons with developmental disabilities(Act for PWDD) and the similar ordinance of the local governments based on this law and focused on the correspondence(the rate of reflection) and the autonomy(differentiation). As of October 2017, 63 local government regulations and Act for PWDD were analyzed in this study. The results of the analysis are as follows: First, the rate of reflection in the ordinance of Act for PWDD was different according to the clause. In the aspect of emphasizing welfare support, the agreement between local ordinance and rate was high. While the Act for PWDD emphasized the rights of persons with developmental disabilities, there was little information about their right in the ordinance of local governments. This is evidence that current ordinance is based on the protective point of view for people with developmental disabilities. In the future, policy measures will be needed to ensure that respect for decision-making by persons with developmental disabilities and rights guarantees are included in the bylaws. Second, there is a provision that the rate of ordinance reflection is 0%, which may be guaranteed by other laws in the area, so it does not mean the absence of related system in the region, but there is possibility of institutional blind spot. In the future, consideration should be given to the complementarity of other legal systems in the area with developmental disabilities, so that persons with developmental disabilities should not be placed in institutional blind spots. Third, the autonomy(differentiation) of local ordinance was examined from the contents aspect and the administrative aspect to help practical implementation. The differentiation between the ordinances vary. Emphasizing the responsibilities of the head of the organization, emphasizing the fact-finding survey, setting up the welfare committee, or adding local needs were included to the ordinance. Local governments considering the enactment of ordinances in the future should refer to these cases and establish enactable local ordinances that take advantage of the characteristics of local autonomy.