• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.89-94
• /
• 1998

Various Mn-oxides can oxidize Cr(III) to Cr(VI). Behaviors of chromium species in the oxidation system, especially on the oxide surface, are expected to control the reaction. During Cr(III) oxidation by birnessite and pyrolusite, Cr species in the reaction system were determined to elucidate their effects on the oxidation. Capacities of Cr oxidation of the two Mn-oxides were quite different. Solution pH and initial Cr(III) concentration also had significant effects on the Cr(III) oxidation by Mn-oxides. Chromium oxidation by pyrolusite was less than 5% of the oxidation by birnessite. The high crystallinity of pyrolusite could be one of the reasons and the difficulty of Cr (III) diffusion to the positive pyrolusite surface and Cr(VI) and Cr(III) adsorption seems to be other controlling factors. At pH 3, adsorption or precipitation of Cr species on the surface of birnessite were not found. Small amount of Cr(VI) adsorption was found on the surface of pyrolusite, but arty Cr precipitation on the oxide surface was not found. Therefore Cr(III) oxidation at pH 3 seems to be controlled mainly by the characteristics of Mn-oxides. Chromiun oxidation by Mn-oxides is thermodynamically more favorable at higher solution pH. However as solution pH increased Cr oxidation by birnessite was significantly inhibited. For Cr oxidation by pyrolusite, as pH increased the oxidation increased, but as Cr(III) addition increased the reaction was inhibited. Under these conditions some unidentified fraction of Cr species was found and this fraction is considered to be Cr(III) precipitation an the oxide surface. Chromium(III) precipitation on the oxide surface seems to play an important role in limiting Cr(III) oxidation by armoring the reaction surface on Mn-oxides as well as lowering Cr(III) concentration available for the oxidation reaction.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.487-492
• /
• 2006

This study estimated characteristics and genetic parameters for milking traits in Holstein dairy cattle. Daily records (12,561) were available from a hundred fifty four lactating cows with sixty six sires at National Livestock Research Institute from November, 2005 to April, 2006. The cows were fed same rations, and were milked twice daily using milking parlour equipped with Alpro-system?? to collect milking records automatically. The experimental cows have averaged 1.9 parities, 139.7 days in milk, and 13kg milk yield per milking. Average milk flow was 64% of peak milk flow. Milking duration, peak milk flow, average milk flow, and milk yield per milking were 5.57±1.67 minutes, 3.58±0.79kg/minute, 2.28±0.51kg/minute, and 13.02±4.09kg, respectively. All traits in the morning milking were higher than those of in the evening milking, and were also increased with parity. Heritabilities for milking duration, peak and average milk flow, and milk yield per time were 0.49, 0.70 0.58 and 0.36, respectively. The genetic correlations of milking duration with peak milk flow, average milk flow, and milk yield per time were 0.48, 0.54, and 0.41, respectively. The correlations of milk yield per milking with peak milk flow and average milk flow were 0.23 and 0.30, respectively. In conclusion, milk flow was increased with milk yield; however milk flow was opposite relationship with milk duration. Further studies are not only necessary to warranty genetic parameters, but pre-installation of automatic recording system to collect daily milking record is also necessary.

• Journal of Distribution Science
• /
• v.8 no.3
• /
• pp.37-47
• /
• 2010

CRM refers to the operating activities that always maintain and promote good relationship with customers to ultimately maximize the company's profits by understanding the value of customers to meet their demands, establishing a strategy which may maximize the Life Time Value and successfully operating the business by integrating the customer management processes. In our country, many big businesses are introducing CRM initiatively to use it in marketing strategy however, most medium and small sized companies do not understand CRM clearly or they feel difficult to introduce it due to huge investment needed. This study is intended to present CRM promotion strategy and activities plan fit for the medium and small sized companies by analyzing the success factors of the leading companies those have already executed CRM by surveying the precedents to make the distributors out of the industries have close relation with consumers to overcome their weakness in scale and strengthen their competitiveness in such a rapidly changing and fiercely competing market. There are 5 stages to build CRM such as the recognition of the needs of CRM establishment, the establishment of CRM integrated database, the establishment of customer analysis and marketing strategy through data mining, the practical use of customer analysis through data mining and the implementation of response analysis and close loop process. Through the case study of leading companies, CRM is needed in types of businesses where the companies constantly contact their customers. To meet their needs, they assertively analyze their customer information. Through this, they develop their own CRM programs personalized for their customers to provide high quality service products. For customers helping them make profits, the VIP marketing strategy is conducted to keep the customers from breaking their relationships with the companies. Through continuous management, CRM should be executed. In other words, through customer segmentation, the profitability for the customers should be maximized. The maximization of the profitability for the customers is the key to CRM. These are the success factors of the CRM of the distributors in Korea. Firstly, the top management's will power for CS management is needed. Secondly, the culture across the company should be made to respect the customers. Thirdly, specialized customer management and CRM workers should be trained. Fourthly, CRM behaviors should be developed for the whole staff members. Fifthly, CRM should be carried out through systematic cooperation between related departments. To make use of the case study for CRM, the company should understand the customer and establish customer management programs to set the optimal CRM strategy and continuously pursue it according to a long-term plan. For this, according to collected information and customer data, customers should be segmented and the responsive customer system should be designed according to the differentiated strategy according to the class of the customers. In terms of the future CRM, integrated CRM is essential where the customer information gathers together in one place. As the degree of customers' expectation increases a lot, the effective way to meet the customers' expectation should be pursued. As the IT technology improved rapidly, RFID (Radio Frequency Identification) appears. On a real-time basis, information about products and customers is obtained massively in a very short time. A strategy for successful CRM promotion should be improving the organizations in charge of contacting customers, re-planning the customer management processes and establishing the integrated system with the marketing strategy to keep good relation with the customers according to a long-term plan and a proper method suitable to the market conditions and run a company-wide program. In addition, a CRM program should be continuously improved and complemented to meet the company's characteristics. Especially, a strategy for successful CRM for the medium and small sized distributors should be as follows. First, they should change their existing recognition in CRM and keep in-depth care for the customers. Second, they should benchmark the techniques of CRM from the leading companies and find out success points to use. Third, they should seek some methods best suited for their particular conditions by achieving the ideas combining their own strong points with marketing. Fourth, a CRM model should be developed that will promote relationship with individual customers just like the precedents of small sized businesses in Switzerland through small but noticeable events.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.56-63
• /
• 2018

The management of Combined Sewer Overflows(CSOs) and Separated Sewer Overflows(SSOs) discharge directly to the effluent system in an untreated state, which occurs when the facility capacity is exceeded due to heavy rain, has become an important issue in recent years as the heavy rain becomes a regular phenomenon. Despite the continuous development of filtration technology, targeting densely populated urban areas, CSOs are rarely applied. Therefore, this study was carried out to optimize the process to apply CSOs in a pilot-scale horizontal flow filtration system with a rope-type synthetic fiber. The research was carried out in two steps: a preliminary study using artificial samples and a field study using sewage. In the preliminary study using an artificial sample, head loss of the filter media itself was analyzed to be approximately 1.1cm, and the head loss was increased by approximately 0.1cm as the linear velocity was increased by 10m/hr. In addition, the SS removal efficiency was stable at 81.4%, the filtration duration was maintained for more than 6 hours, and the average recovery rate of 98% was obtained by air backwashing only. In the on-site evaluation using sewage, the filtration duration was approximately 2 hours and the average removal efficiency of 83.9% was obtained when belt screen (over 450 mesh) was applied as a pre-treatment process to prevent the premature clogging of filter media. To apply the filtration process to CSOs and SSOs, it was concluded that the combination with the pre-treatment process was important to reinforce the hydraulic dimension for the stable maintain of operation period, rather than efficiency. Compared to the dry season, the quality of incoming sewage was lower in the rainy season, which was attributed to the characteristics of the drainage area with higher sanitary sewerage. In addition, the difference in removal efficiency according to the influent quality of the wet season and dry season was small.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.658-665
• /
• 2013

In this study, we measured particulate matter(PM) which emerged as the hot issue from the International Maritime Organization(IMO) and the exhaust emission using HANBADA, the training ship of Korea Maritime University. In particular, the PM was obtained with TEM grid. PM structure was observed by electron microscopy. And exhaust gases such as NOx, $CO_2$, and CO were measured using the combustion gas analyzer(PG-250A, HORIBA). The results of this study are as follows. 1) When the ship departed from the port, the maximum difference in PM emissions were up to 30 % due to the Bunker Change. 2) Under the steady navigation, emission of PM was $1.34mg/m^3$ when Bunker-A is changing L.R.F.O(3 %). And, at the fixed L.R.F.O (3 %), emission of PM was $1.19mg/m^3$. When the main engine RPM increased up to 20 % with fixed L.R.F.O(3 %), emission of PM was $1.40mg/m^3$. When we changed to low quality oil(L.R.F.O(3 %)), CO concentration from main engine increased about 16 %. On the other hand, when the main engine RPM is rising up to 20 %, CO concentration is increased more than 152 percent. These results imply that the changes of RPM is a dominant factor in exhaust emission although fuel oil type is an important factor. 3) The diameter of PM obtained with TEM grid is about $4{\sim}10{\mu}m$ and its structure shows porous aggregate.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.347-353
• /
• 2010

Source terms of metal waste comprising a spent fuel assembly are relatively important when the spent fuel is pyroprocessed, because cesium, strontium, and transuranics are not a concern any more in the aspect of source term of permanent disposal. In this study, characteristics of radiation source terms for each structural component in spent fuel assembly was analyzed by using ORIGEN-S with a assumption that 10 metric tons of uranium is pyroprocessed. At first, mass and volume for each structural component of the fuel assembly were calculated in detail. Activation cross section library was generated by using KENO-VI/ORIGEN-S module for top-end piece and bottom-end piece, because those are located at outer core with different neutron spectrum compared to that of inner core. As a result, values of radioactivity, decay heat, and hazard index were reveled to be $1.40{\times}10^{15}$ Bequerels, 236 Watts, $4.34{\times}10^9m^3$-water, respectively, at 10 years after discharge. Those values correspond to 0.7 %, 1.1 %, 0.1 %, respectively, compared to that of spent fuel. Inconel 718 grid plate was shown to be the most important component in the all aspects of radioactivity, decay heat, and hazard index although the mass occupies only 1 % of the total. It was also shown that if the Inconel 718 grid plate is managed separately, the radioactivity and hazard index of metal waste could be decreased to 20~45 % and 30~45 %, respectively. As a whole, decay heat of metal waste was shown to be negligible in the aspect of disposal system design, while the radioactivity and hazard index are important.

• The Journal of Industrial Distribution & Business
• /
• v.1 no.1
• /
• pp.33-41
• /
• 2010

In the age of globalization, effective and efficient corporate management is becoming more important as domestic and international business circumstances changes. In the middle of endless changes in business circumstances, fast reaction to customers and market, and offering customized goods and service became essential. In this respect, CRM designed to utilize customer information scientifically and systematically, has become an essential system and marketing strategy to enhance corporate competitiveness. CRM has placed the importance of customers in the front of marketing and has focused every process and business minds on customers. Recent change in the market and the trend of establishing and introducing CRM system has lead us to concentrate on the introduction of CRM in the financial institutions. This study searched for several views about CRM in academic and industrial papers. Through theoretical approach on CRM, the background of the introduction of CRM, the purpose of CRM, the characteristic and application of CRM, and the expected effect of CRM will be discussed. This study is focused on financial institutions where CRM is widely used. And through documents about examples of the introduction of CRM, the status of the establishment of domestic CRM and the necessity and trend of CRM will be discussed. Also the problem of CRM in the financial institutions and the improvement of CRM in domestic banks will be analyzed. When discussing CRM in the financial area, customers are the main source of corporate profit and through relationship management with the customers enhancing loyalty and maximizing profit can be obtained. Especially in CRM in financial institutions, maintaining existing customers makes higher profit ratio, so repurchasing and cross selling becomes important for obtaining lifetime value of existing customers who contribute to most of the profit of corporations. As a result, CRM should be completely customer oriented. CRM in financial institutions is not merely marketing work, but organizational competence which is made up of standardized work process through total process integration inside the corporation. Corporations which plan to introduce CRM should analyze the characteristics and conditions of corporations and establish purpose and strategy of CRM. And they need long term view to find out the factors which best fit for the introduction of CRM. To enable this, strategy composed of daily marketing activity and CRM concept is necessary. Also continued improvement through drill and training for operating organization should be followed to maintain CRM well. And corporate culture must settle customer as the center of corporate value. The race for introducing and improving CRM has already begun. CRM should not be regarded as a choice. It should be accepted as something essential. In this reality financial institutions should solve subdivision problem of customers and necessity of customers with the mind of 'customer's profit is my profit'. Customer focused management should not be emphasized only by words. Efforts like viewing from the customer's point must be nurtured to provide methods to help customers. That is, we should not just follow what is done in foreign countries. We should solve the problem of our customers according to the situation of our country, our industry, our corporation. Then we can gain the trust of customers, and the value derived from the customers will become the background of CRM which will lead the corporation to success.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.40-50
• /
• 2011

We study the characteristic and total flux of non-point pollutants such as total suspended solids (TSS), chemical oxygen demand (COD), dissolved nutrients, total phosphorus (TP) and total nitrogen (TN) in the storm water runoff from urban streams and sewer outlets of Banweol Industrial Complex around Shihwa Lake. The concentrations of non-point pollutants were generally increased with increasing of the duration and intensity of rainfall. Mean TSS concentration of Ansan stream was higher than that of sewer outlets but mean concentrations of COD, TP and TN were approximately 2~5 times higher of sewer outlet than of urban stream. TSS showed statistically positive relationships with COD and TP but it had negative correlation with dissolved nutrients. There was a significant correlation between total flux of non-point pollutants in the storm water runoff and total basin area of each sewer outlet, showing that the highest runoff flux was observed at 3rd sewer outlet which represents the largest basin area from Banweol industrial complex. Total runoff fluxes for TSS, COD, TP and TN in this study were 187,536 kg, 17,118 kg, 922 kg, 13,519 kg, respectively. Given the basin area of sewer outlet in Banweol industrial complex which corresponds only 3% from total catchment area around Shihwa Lake, enormous amount of non-point pollutants will be entered into Shihwa Lake without any treatment. It is necessary to manage and reduce of various non-point sources and pollutants because the runoff of nonpoint pollutants during storm events should be deteriorating the water quality of Shihwa Lake. Our results provides useful informations on the development of best managements practices (BMPs) for effective implementation of total pollution loads management system of Shihwa Lake.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.163-170
• /
• 2016

To evaluate whether the difference in geometrical characteristics between high-dose-rate (HDR) $^{192}Ir$ sources would influence the dose distributions of intracavitary brachytherapy. Two types of microSelectron HDR $^{192}Ir$ sources (classic and new models) were selected in this study. Two-dimensional (2D) treatment plans for classic and new sources were generated by using PLATO treatment planning system. We compared the point A, point B, and bladder and rectum reference points based on ICRU 38 recommendation. The radial dose function of the new source agrees with that of the classic source except difference of up to 2.6% at the nearest radial distance. The differences of anisotropy functions agree within 2% for r=1, 3, and 5 cm and $20^{\circ}$ < ${\theta}$ < $165^{\circ}$. The largest discrepancies of anisotropy functions reached up to 27% for ${\theta}$ < $20^{\circ}$ at r=0.25 cm and were up to 13%, 10%, and 7% at r=1, 3, and 5 cm for ${\theta}$ > $170^{\circ}$, respectively. There were no significant differences in doses of point A, point B, and bladder point for the treatment plans between the new and classic sources. For the ICRU rectum point, the percent dose difference was on average 0.65% and up to 1.0%. The dose discrepancies between two treatment plans are mainly affected due to the geometrical difference of the source and the sealed capsule.

• Journal of Sasang Constitutional Medicine
• /
• v.23 no.3
• /
• pp.391-401
• /
• 2011

1. Objectives: Though the eating habits have improved and the living method has become convenient according to the economic growth thanks to the modern industrialization, because of the lack of exercise, obesity, wrong eating habits and stress etc, various symptoms of disease of adults are on the rise. This is the phenomenon that happens as the eating life has become life in the West along with the inundation of the western culture in our society. In this perspective, there has been many various clinical research that's been proceeded so far about the physical constitution and obesity, but there has been little research on the objective analysis of the clinical research about the alimentotherapy using taeeumjoweetang. 2. Methods: In this research we have checked the weights, fat rates, fat weight, abdominal fat rate, blood pressure, and BMI over the objects of the women that were diagnosed as lunisolar system as their physical constitution, and assessed the paramecium lipid, in-blood antioxidation enzyme and the damage of oxidization in the urine by physical constitution-specific of the body shapes that were determined by BMI. The statistical analysis of the current research was processed by using of SPSS 17.0 program. We have figure out statistical amounts such as the arithmetic average, average deviation rate and percentage number. Fro the verification of he significancy of each elements, we have used the paired t-test, ANOVA, Chi-square test at the level of p<0.05. 3. Results and Conclusions: Their characteristics are age $21.20{\pm}1.35$, height $160.30{\pm}6.11cm$, weight $64.66{\pm}8.72kg$, fat rates are $35.97{\pm}4.87%$, fat amount $23.40{\pm}5.48$, abdominal fat rate $0.823{\pm}0.03$, BMI $25.12{\pm}2.79kg/m^2$, and systolic blood pressure $111.60{\pm}10.28mmHg$ and diastolic blood pressure $68.60{\pm}7.43mmHg$ and we have let them take the medicine twice a day for 8 weeks. The clinical result for the Cholesterol, Triglyceride, HDL-cholesterol, LDL-cholesterol, SGOT, SGPT, of the object people was that for the function of the liver, the result of the SGOT and SGPT test was $17.16{\pm}3.05$, $15.00{\pm}2.99IU/L$, which was a decrease, and had statistical meaning, but for the SGOT, though the figure reduced to $11.92{\pm}4.61$, $10.80{\pm}3.07$, it had no statistical meaning. For the whole cholesterol level, the figure reduced to $169.00{\pm}19.95$, $160.08{\pm}22.52$ mg/dL and had statistical significance(p<0.05). Neuter fat number, Triglyceride has slightly increased to $67.52{\pm}36.32$, $68.08{\pm}47.33$ mg/dL but did not have any statistical meaning. The antioxdant enzyme marker standard marker, SOD has increased to $2.52{\pm}0.73$, $2.86{\pm}0.60U/ml$, and had statistical significance(p<0.01). Catalase also increased by $0.63{\pm}0.18$, $1.07{\pm}0.25mmol/ml$ and had statistical meaning(p<0.01). GPx also increased to $204.76{\pm}32.64$ nmol/ml and had statistical meaning(p<0.01). But, for the Total antioxidant, though it has raised to $1.51{\pm}0.26$, $1.57{\pm}0.17nmol/{\mu}l$, it did not have any statistical meaning. MDA of oxidative stress marker has decreased to $1.70{\pm}0.68{\mu}g/ml$, $1.21{\pm}0.50{\mu}g/m$ and had statistical significance(p<0.01). 8-OHdG also decreased $3.35{\pm}0.95ng/ml$, $2.21{\pm}0.50ng/ml$ and had statistical meaning(p<0.01). In this research, we have analyzed the various markers relating to BFM and changes in oxidative enzyme in blood by takingtaeeumjoweetang. Taeeumjoweetang has the positive effect on inbody antioxidant system and reducing the content of cholesterol, which is proven to help losing weight and improving hyperlipidemia statistically. With this research, we hope to improve the lifestyle of those who are either obese or need to manage their dietary habits, and also to become the touchstone of integrating Oriental Medicine with the science of food & nutrition.