• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.66-74
• /
• 2007

Cognitive Radio system can guarantee available channel whenever, wherever by sensing surrounding channel condition. Therefore, there is a strict rule that have to use allocated channel efficiently without any interference from incumbent User. In this paper, to avoid interference which can occur during uplink transmission in CR system, we propose reporter using scheme which informs incumbent user's situation to adjacent cell to limit channel usage. Therefore, we can use more channel in each cell without interference. With this scheme we can expect better throughput using more channel in a large space with same resource.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2063-2081
• /
• 2018

A resource allocation algorithm is proposed in this paper to simultaneously minimize the total system power consumption and maximize the system throughput for the downlink of multi-user multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) systems. With the Lagrange dual decomposition method, we transform the original problem to its convex dual problem and prove that the duality gap between the two problems is zero, which means the optimal solution of the original problem can be obtained by solving its dual problem. Then, we use convex optimization method to solve the dual problem and utilize bisection method to obtain the optimal dual variable. The numerical results show that the proposed algorithm is superior to traditional single-objective optimization method in both the system throughput and the system energy consumption.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.69-72
• /
• 2007

In this paper, we analyze the performance of the network management system with intelligent mobile agent system. The proposed system dynamically selects appropriate its destinations. Thus, the system has an advantage of flexible network management in mobile network environments as well as dynamic change of traffic. Comparing its delay and throughput performance with the conventional SNMP based network management system, we find that the proposed mobile agent system performs better efficiency than the conventional one.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.595-603
• /
• 2016

In the Republic of Korea, the LTE-based public safety (PS-LTE) network is being built for the 700 MHz frequency band. However, the same bands are also assigned to the LTE-based high-speed railway (LTE-R) network. Therefore, it is essential to utilize the co-channel interference management schemes for the coexistence of two LTE networks in order to increase the system throughput and to reduce the user outage probability. In this paper, we focus on the downlink (DL) system for the coexistence of PS-LTE and LTE-R networks by considering non radio access network (RAN) sharing and LTE-R RAN sharing by PS-LTE users (UEs) to analyze the UE throughput. Moreover, we also utilize the cooperative communications schemes, such as coordinated multipoint (CoMP) for the coexistence of PS-LTE and LTE-R networks in order to reduce the UE outage probability. We categorize the coexistence of PS-LTE and LTE-R networks into four different scenarios, and evaluate the performance of each scenario by the important performance indexes, such as UE average throughput and UE outage probability.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.29-39
• /
• 2009

The need for radio spectrum is recently considered as a huge hurdle towards the rapid development of wireless networks. Large parts of the spectrum are allocated to licensed radio services in proprietary way. However, enormous success of the wireless services and technologies in the unlicensed bands has brought new ideas and innovations. In recent years cognitive radio has gained much attention for solving the spectrum scarcity problem. It changes the way spectrum is regulated so that more efficient spectrum utilization is possible. Multi-hop relay technology on the other hand has intensively been studied in the area of ad hoc and peer-to-peer networks. But in cellular network, only recently the integration of multi-hop capability is considered to enhance the performance significantly. Multi-hop relaying can extend the coverage of the cell to provide high data rate service to a greater distance and in the shadowed regions. Very few papers still exist that combine these methods to maximize the spectrum utilization. Thus we propose a network architecture combining these two technologies in a way to maximize the system throughput. We present the throughput capacity equations for the proposed system model considering various system parameters like utilization factor by the primary users and primary users' transmission radius and through extensive numerical simulations we analyze the significance of work.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.40-47
• /
• 2007

In this paper, we propose and analyze the Adaptive Modulation System with optimal Turbo Coded V-BLAST(Vertical-Bell-lab Layered Space-Time) technique that adopts the extrinsic information from MAP (Maximum A Posteriori) Decoder with Iterative Decoding as a priori probability in two decoding procedures of V-BLAST; the ordering and the slicing. Also, we consider and compare the Adaptive Modulation System using conventional Turbo Coded V-BLAST technique that is simply combined V-BLAST with Turbo Coding scheme and the Adaptive Modulation System using conventional Turbo Coded V-BLAST technique that is decoded by the ML (Maximum Likelihood) decoding algorithm. We observe a throughput performance and a complexity. As a result of a performance comparison of each system, it has been proved that the complexity of the proposed decoding algorithm is lower than that of the ML decoding algorithm but is higher than that of the conventional V-BLAST decoding algorithm. however, we can see that the proposed system achieves a better throughput performance than the conventional system in the whole SNR (Signal to Noise Ratio) range. And the result shows that the proposed system achieves a throughput performance close to the ML decoded system. Specifically, a simulation shows that the maximum throughput improvement in each MIMO scheme is respectively about 350 kbps, 460 kbps, and 740 kbps compared to the conventional system. It is suggested that the effect of the proposed decoding algorithm accordingly gets higher as the number of system antenna increases.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.31-37
• /
• 2009

In the two-way relay channel, the relay employ Amplify-and-Forward (AF) or Decode-and-Forward (DF) protocol, and broadcast the network-coded signal to both user. In the system, DF protocol provides maximum throughput at low signal to noise ratio(SNR). On the other hand, at high SNR, AF protocol provides maximum throughput. The paper propose active transmission scheme which employ Amplify-and-Forward or Decode-and-Forward protocol based on received SNR at the relay over Two-way relay channel. The optimal threshold is investigated numerically for switching the protocol. Through numerical results, we confirm that the proposed scheme outperforms conventional schemes over two-way relay channel.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2626-2646
• /
• 2014

This study presents a power and Physical Resource Blocks (PRBs) joint allocation algorithm to coordinate uplink (UL) interference in the device-to-device (D2D) underlaying Long Term Evolution-Advanced (LTE-A) networks. The objective is to find a mechanism to mitigate the UL interference between the two subsystems and maximize the weighted sum throughput as well. This optimization problem is formulated as a mixed integer nonlinear programming (MINLP) which is further decomposed into PRBs assignment and transmission power allocation. Specifically, the scenario of applying imperfect channel state information (CSI) is also taken into account in our study. Analysis reveals that the proposed PRBs allocation strategy is energy efficient and it suppresses the interference not only suffered by the LTE-A system but also to the D2D users. In another side, a low-complexity technique is proposed to obtain the optimal power allocation which resides in one of at most three feasible power vectors. Simulations show that the optimal power allocation combined with the proposed PRBs assignment achieves a higher weighted sum throughput as compared to traditional algorithms even when imperfect CSI is utilized.

• Korean Journal of Agricultural Science
• /
• v.45 no.3
• /
• pp.317-323
• /
• 2018

The demand for crop production is increasingly becoming steeper due to the rapid population growth. As a result, breeding cycles should be faster than ever before. However, the current breeding methods cannot meet this requirement because traditional phenotyping methods lag far behind even though genotyping methods have been drastically developed with the advent of next-generation sequencing technology over a short period of time. Consequently, phenotyping has become a bottleneck in large-scale genomics-based plant breeding studies. Recently, however, phenomics, a new discipline involving the characterization of a full set of phenotypes in a given species, has emerged as an alternative technology to come up with exponentially increasing genomic data in plant breeding programs. There are many advantages for using new technologies in phenomics. Yet, the necessity of diverse man power and huge funding for cutting-edge equipment prevent many researchers who are interested in this area from adopting this new technique in their research programs. Currently, only a limited number of groups mostly in developed countries have initiated phenomic studies using high throughput methods. In this short article, we describe the strategies to compete with those advanced groups using limited resources in developing countries, followed by a brief introduction of high throughput phenotyping.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.5
• /
• pp.385-399
• /
• 2005

The phenotypic response of a cell results from a well orchestrated web of complex interactions which propagate from the genetic architecture through the metabolic flux network. To rationally design cell factories which carry out specific functional objectives by controlling this hierarchical system is a challenge. Transcriptome analysis, the most mature high-throughput measurement technology, has been readily applied In strain improvement programs in an attempt to Identify genes involved in expressing a given phenotype. Unfortunately, while differentially expressed genes may provide targets for metabolic engineering, phenotypic responses are often not directly linked to transcriptional patterns, This limits the application of genome-wide transcriptional analysis for the design of cell factories. However, improved tools for integrating transcriptional data with other high-throughput measurements and known biological interactions are emerging. These tools hold significant promise for providing the framework to comprehensively dissect the regulatory mechanisms that identify the cellular control mechanisms and lead to more effective strategies to rewire the cellular control elements for metabolic engineering.