• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.255-258
• /
• 2015

Scaffolds are frequently used in construction projects. Despite the impact on the entire safety, scaffolds are rarely analyzed as part of the safety planning. While recent advances in BIM (Building Information Modeling) provides opportunity to address potential safety issues in the early planning stages, it is still labor-intensive and challenging to incorporate scaffolds into current manual jobsite safety analysis which is time-consuming and error-prone. Consequently, potential safety hazards related to scaffolds are identified and presented during the construction phase. The objective of this research is to integrate scaffolds into automated safety analysis using BIM. A safety checking system was created to simulate the movements of scaffolds along the paths of crews using the scaffolds. Algorithms in the system automatically identify safety hazards related to activities working on scaffolds. Then, the system was implemented in a commercially available BIM software program for case studies. The results show that the algorithms successfully identified safety hazards that were not noticed by project managers of the projects. The results were visualized in BIM to facilitate early safety communications.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.5
• /
• pp.303-313
• /
• 2021

Recently, quality control of the Liquefied Natural Gas Carrier (LNGC) cargo hold and block-erection interference areas using 3D scanners have been performed, focusing on large shipyards and the international association of classification societies. In this study, as a part of the research on LNGC cargo hold quality management advancement, a study on deep-learning-based scaffolding system 3D point cloud object detection and post-processing were conducted using a LNGC cargo hold 3D point cloud. The scaffolding system point cloud object detection is based on the PointNet deep learning architecture that detects objects using point clouds, achieving 70% prediction accuracy. In addition, the possibility of improving the accuracy of object detection through parameter adjustment is confirmed, and the standard of Intersection over Union (IoU), an index for determining whether the object is the same, is achieved. To avoid the manual post-processing work, the object detection architecture allows automatic task performance and can achieve stable prediction accuracy through supplementation and improvement of learning data. In the future, an improved study will be conducted on not only the flat surface of the LNGC cargo hold but also complex systems such as curved surfaces, and the results are expected to be applicable in process progress automation rate monitoring and ship quality control.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.231-232
• /
• 2022

건설 현장이나 일반 제조업 현장은 작업자의 고소 위치에서의 작업시, 필요한 특정 장소로의 접근을 위한 임시 구조물을 설치하는데 이를 가설비계라고 한다. 이러한 가설비계는 작업자의 안전 통행과 작업을 위한 받침대 역할, 장비나 공구, 자재를 임시 적치하기 위한 장소로 활용되는데 일반 건축물과 중후장대한 조선소 블록 제작등에 필수적으로 사용된다. 하지만 가설설비라는 특성으로 비계와 관련된 연구가 부진하고 사업적으로 참여하는 사업주 또한 진출을 가볍게 생각하고 있으며 해당 공사에 임하는 작업자의 산업으로의 진입문턱도 낮은 등으로 시공 품질이 떨어질 우려가 매우 높다. 또한 설치후에는 품질검사가 어려워 작업자의 숙련도나 진정성 등에 의한 주관적 작업 결과물이 설치된 시설물을 사용하는 주변 작업자에게는 불안전 요인이 되기도 한다. 이에 작업자의 숙련도나 주관적 판단에 의한 가설 구조물 설치를 회피하여 안전성을 높이기 위한 방안이 연구되어 왔는데 이것이 시스템비계이다. 이러한 시스템비계에 대한 사용성을 확대하기 위해 국토교통부와 고용노동부등의 정부기관에서는 여러 가지 제약과 동시에 장려정책을 제시하고 있으나 공적 발주나 일부 대기업그룹 외의 중소 현장에는 그 확산 속도가 높지않은 편이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.121-126
• /
• 2019

Despite the trend of decreasing accidents, falling accidents in the construction industry have not decreased and are even rising. Most major accidents are falling accidents caused by hanging scaffolding and are mostly serious. We conducted a review of the literature, institutions, and regulations, which showed that domestic standards are not unified because they are drawn up by referring to overseas standards for hanging scaffolding. New regulations or standards should be established, which should reflect the safety plans for equipment, work advance plans, education, and management. If facility improvement plan for Hanging Scaffolding and implementation of revision of the current work use, regulations and guides are implemented, it will be recognized in advance of the causes of the accident statistics and the classification system and will be the basis for the implementation of joint efforts by workers, managers, supervisors and owners to reduce accidents.

• Magazine of the Korea Concrete Institute
• /
• v.18 no.4 s.93
• /
• pp.57-62
• /
• 2006

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.66-71
• /
• 2013

There is a critically structural problem of scaffolding system when one of scaffold columns is remove to be used as a gangway for their temporary office in the structure before finishing all such as an apartment or office building. This is not used to checking to structurally checking at a construction site. This study is to find out which system at a site will be more effective and low-cost-high effectiveness of aluminum ladder, timber ladder, ${\phi}$1/2 inch steel pipe truss with a type of concave, convex warren truss ladders. Theses are structurally tested with horizontal set as a truss type with 1.8 meter long. Concentrated load has been loaded at the upper center of the system and checked its strain at the bottom center, using aluminum-use strain gage and steel-use gauge have been attached concave warren truss with diameter 1/2 inch has 14% stronger than convex truss. Convex truss has almost same strength as an aluminum ladder truss, it is found out.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.94-100
• /
• 2021

To improve the productivity of cargo containment construction for a membrane LNG carrier, it is important to shorten the installation period and process of the scaffolding system, which is a construction workbench of a cargo containment for a membrane LNG carrier. As an effective method, opinions are being gathered to enlarge the lifting unit from the existing two stages to eight stages. On the other hand, the stresses around the pin and hole will increase significantly because of the increase in lifting load according to the large size of the module. The purpose of this study was to establish a new large module-lifting plan by introducing TRIZ to solve these problems. This study adopted a method to utilize 40 inventive principles, which is one of the various problem-solving tools of TRIZ. First, technical contradictions were derived, the engineering parameters were selected. Second, efficient inventive principles were selected to overcome the technical contradictions using a contradiction matrix. Finally, the general and specific solutions were derived through the selected inventive principle, and structural analysis confirmed that the stress generated in the structure was low. The utility of TRIZ was confirmed by the successful lifting of large modules using the established lifting method.

• 한국정보교육학회:학술대회논문집
• /
• 2009.08a
• /
• pp.227-233
• /
• 2009

웹 기반 학습 환경에서 스캐폴딩 (Scaffolding) 전략은 내용 지식과 과제의 특성을 반영하고 학습자 수준과 특성에 맞게 도움을 제공하여 개별화된 학습 환경과 학습자가 스스로 학습할 수 있도록 추가적인 정보를 제공할 수 있는 효과적인 학습 전략이다. 본 연구에서는 경도정신지체 학생이 학업 성취도 향상을 위해서 초인지 스캐폴딩 전략을 적용한 웹 기반 학습 시스템을 제안하고자 한다. 본 시스템의 특징은 다음과 같다. 첫째, 학습자에게 학습에 대한 방향과 목표를 명확하게 제시해 준다. 둘째, 과정에 집중할 수 있도록 학습단계마다 지원을 제공하여 학습의 효율성을 높이게 한다. 셋째, 교사와 학습자의 접근성이 용이하도록 개발하였다.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.34-40
• /
• 2017

The catastrophic collapse of the in-boiler scaffolding system in the two thermal power plants occurred in March and April 2012. After site investigation and document review, it was found that the specialized scaffolding system was imported for overhaul & maintenance and that the system did not get the safety certification at the import. In this regard, this study developed & proposed an access platform and a support for the vertical tube section of the super heat as well as a variable-length platform for the horizontal tube section, satisfying the domestic certification standards. The access platform was developed to be easy to handle by the worker with a weight of about 0.069 kN, which could reduce the risk of falling accidents and workers' musculoskeletal diseases. For the variable-length platform, it is possible to cope with various changes in length between the horizontal tubes associated with the increase of rigidity in the overlapping and the elimination of the protrusion.

• The Journal of Korean Association of Computer Education
• /
• v.12 no.5
• /
• pp.87-94
• /
• 2009

This paper presents a Web-based interactive and adaptive learning system that helps students learn the pumping lemma for the family of regular languages. Our system allows the students to proceed with their learning according to their individual differences through Web-Based Instruction and gives them opportunities for the interaction so that they can practice exercise related to the learning and gain feedbacks on the results of the exercises immediately. Especially, the system provides adaptive scaffolding that helps learners understand each step for the proof of the pumping lemma. Unlike existing systems that support learning the pumping lemma, the proposed system defines possible errors in advance and provides appropriate messages for corresponding errors. In addition, the system allows the learners to decompose a string into three parts so that they can understand the pumping lemma precisely.