• 한국환경농학회:학술대회논문집
• /
• 2009.07a
• /
• pp.3-18
• /
• 2009

It is difficult for consumers to satisfy high safety request with post-management method such as inspection and surveillance, as various changes in-and-out of the country associated with food safety. In terms of food safety problems related to foods, it is crucial to recognize public health and consumer protection and construct pre-preventive Food Control System. A joint committee, FAO/WHO made the following consultations to the National Food Safety System. ${\circ}$ Approach entirely from farm to table ${\circ}$ Get ready for Risk Analysis System ${\circ}$ Secure transparency ${\circ}$ Establish the optimal policy by evaluating the effect of regulation When it comes to summarizing the consultation, it would be accumulated as two key words; "Efficiency" and "Credibility". Whereas the problem of efficiency focuses on precaution rather than post-management, it requires policy option to maximize consumer's benefit by evaluating the cost for the Food Safety Management and its benefit. Also, analyzing risk's character and amount, demanding an optimal means, and introducing scientific analysis system put much value on the stakeholder's communications are procedure's security which can satisfy both "Efficiency" and "Credibility" simultaneously. Especially, it is emphasized here that Risk Assessment need to be separated from Risk Management. This action is a valid means of credibility security throughout improving transparency. A number of nations and organizations have reformed the method of food management passing through reflection and examination of the prior National Food Safety Management since BSE occurred in Britain, 1996. FSA; Food Standard Agency, AFFSA, EFSA, BfR, and FSC are Risk Assessment Organization functionally separated from Risk Management Organization, JECFA, JMCFA, JMPR, JEMRA in Codex charge Risk Assessment internationally. In case of advanced countries excluding several those such as The U.S. and so forth, though these Risk Assessment Organizations are either separated functionally within Risk Management Organization or operated as apart organ, common factors are in which it has independence as Science Base. While securing independence of Risk Assessment Function, it is a tendency Risk Management should be functionally unified into efficiency as well. Though Germany constructs integral Risk Management System of diverse ways according to social and political conditions of each country such as GFOCP, DVFA, SNFA, CFIS and AQIS, there is a key word in the center, "Securing efficiency of Food Safety Management". However our nation has a representative plural；diversified system with The U.S., we took a step forward for unification as empowering policy's generalization；adjustment and Risk Assessment Function by means of enacting the "Food Safety Fundamental Law" in 2008 and establishing the "Food Safety Policy Commission" with private and governmental sectors in the Prime Minister's office. Even though the unification of Risk Management hereby increased, there is the lack of strengthening function of Risk Assessment and securing independence. It needs to be required for the professional committee in Food Safety Policy Commission to develop as a exclusive office of Risk Assessment by separating from a policy decision. Administrative Branches should reinforce feeble functions such as fundamental investigation；research for carrying out Risk Assessment with securing efficiency throughout reassessment of prior Risk Management Means.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.850-858
• /
• 2011

The risk analysis plays an important role in weapon system acquisition project due to uncertainties in the acquisition process. But in domestic, studies on risk analysis are insufficient and risk cost is not included in acquisition budget in policy. Therefore, in this study, we suggest a method that measures risk or success probability of project using the stochastic model. In particular, in order to calculate the success probability, we apply the joint probability distribution model of cost and schedule that are critical factors influencing the project risk. And also we verify the applicability of this model in Korean defence industry environment through case studies.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.150-156
• /
• 2018

As the types and usage of chemical increase, modern countries should protect their health and environment from the risk of hazardous chemical. Chemical accidents not only affect humans but also cause huge losses to the environment. Moreover, since its effects do not end in a short period of time, it is necessary to identify the extent of the damage and establish a prevention and response system in advance. In 2015, the Chemical Substances Management Act provided a system for assessing the impact on the people and the environment around the workplace. However, it is difficult to quantitatively evaluate the impact on environmental factors such as vegetation and aquatic, with the current hazard assessment methods. The purpose of this study is to analyze the quantitative risk of environmental receptors. This study improved the existing risk assessment formula by using the environmental vulnerability index and established the end point concentration criterion which can estimate the damage range to environmental media. To verify the results of the study, a virtual accident scenario was selected and a case study was conducted. As a result, the extent of impact on the environmental medium can be calculated, and the degree of environmental risk of the zone can be quantified through the risk analysis considering the environmental vulnerability. This study is expected to increase the reliability of the reliability of the existing risk anaylsis method beacause it is a risk analysis method that can be applied when the environmental factors are absolutely necessary and when the residents and environment are complex.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.123-134
• /
• 2004

This paper deals with the feasibility analysis and alternatives for infrared detector development. The purpose of this paper analyze development requirement and feasibility study in both technology and cost. We get raw input data for system engineering process from development and technical expert, and then analyze cost and technology for development feasibility, and alternative study. Infrared Detector is core component of Thermal Imaging System and developed by ADD from 2006 to 2008 year. Technical level is analyzed by TRL(Technical Readiness Level) and AOA(Analysis of Alternative) is done by development and production cost estimate. We use SEER-H tool for cost estimate, that is parametric cost estimate tool based on Knowledge Base. Also this paper presents risk analysis for project management because it is necessary to risk driver management during the infrared detector development. The result of IR Detector feasibility and alternative study will be used in technical and cost analysis. This study can help those who are related to the cost analysis and development feasibility of other weapons

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3099-3103
• /
• 2011

In measurement of risk voltages; the step and touch voltage, the distance between the current electrode and the ground electrode recedes up to several hundred meters as the scale of grounding system increases. This paper dealt with the measurement method of risk voltage in a restricted space. The risk voltage was analyzed depending on the distance and the direction of the current electrode from the ground electrode in a $10[m]{\times}10[m]$ mesh grounding system. The average value of risk voltages measured at a point 20 [m] away from the current electrode was deviated below 5 [%] from that measured at 100 [m] point. Consequently, the evaluation of risk voltage of a large-scale grounding system buried in a spatially restricted place is available if the current electrode is installed in symmetry to the ground electrode.

• Journal of Veterinary Clinics
• /
• v.17 no.1
• /
• pp.28-31
• /
• 2000

An animall health monitoring system in Gyeongnam area(near Chinju) was studied to analysis of biochemical risk factors in 617 herds. Clinical serum factors such as glutamate oxaloacetate transaminase(GOT), glutamate pyruvate transaminase(GPT), Ca, P, Mg, glucose, and cholesterol were measured with automatic biochemical analyzer(Ra-X7T Techmmicon, USA). In serum analysis, 613 cattle were within normal llimits(GOT: 9.5-85 IU-dl, GPT: 25-77IU/dl, total protein: 5.8-8.5g/dl, Ca: 4.2-12.4mg/dl, P: 4.6-9.7mg/dl, Mg: 1.5-3.0mg/dl, glucose: 48-120mg/dl, Cholesterol: 70-170mg/dl), the other cattle showed high glucose and high cholesterol level. It is proposed that clinical serum factors to be estimated may be valuable for developing of animal health monitoring system model.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.224-228
• /
• 2012

According to the results of Probabilistic Safety Assessment(PSA) for a Nuclear Power Plant(NPP), an Emergency Power Supply(EPS) system has been considered as one of the most important safety system. Especially, the interests in the reliability of the EPS system have been increased after the severe accidents of Fukushima Daiichi. Firstly, we performed the risk assessment and the importance analysis of the EPS system based on the PSA models of the reference plant, which is the Korean standard NPP type. Considering a portable Diesel Generator(DG) system as the reliability reinforcement of the EPS system, we modified the PSA models and performed the risk impact assessment and the importance analysis. Although the reliability of the potable DG could be about 20% of the reliability of the alternative AC DG, we identified that Core Damage Frequency(CDF) was decreased by at least 4.6%. In addition, the risk impacts due to the unavailability of the EPS system on CDF were decreased.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.153-158
• /
• 2013

Objective: This study aims to suggest different approaches in analyzing risks associated with musculoskeletal disorders (MSDS) for risk assessment. Background: Upon concluding that the changes in the industrial environments have made it hard to regulate diverse risk factors, the government has implemented a policy for risk assessment. Method: This study has proposed a method, creating programs using Excel that perform qualitative or quantitative analysis, for evaluating risk factors in risk assessments and has applied this in manufacture and service industries. Results: To verify the validity of the developed program, risk assessment has been performed on restaurant chefs as an example. For quantitative evaluation, the study has suggested approaches using the results for REBA evaluation and the analysis report on the work scenes of a fitting-shop in a shipbuilding industry. Application: Constructing and adapting a system using Excel in evaluating risk factors for risk assessments as this study suggests, is expected to contribute to revitalizing risk assessments.

• Journal of the Korean Society of Costume
• /
• v.51 no.7
• /
• pp.123-134
• /
• 2001

The purpose of this study to compare the purchasing behaviour of men's business suits, among custom suits, system order, and ready-made suits, centering around the choice of information source, risk perception and benefits sought. The survey of this study was collected from 450 adult male in Seoul. The data was analyzed by factor analysis and ANOVA. The result of this study were as follows : 1. Custom suits, system order, and ready-made suits consumers have a significant difference in the choice of information source. The consumer attaching most importance to the impersonal information source is the system order users, custom suits users, and ready-made suits users respectively. However there was no significant difference in the personal source among 3 different purchasing behaviour of men's suits. 2. For the risk perception, 1) the group who perceived the highest in economic risk is the system order users, followed by custom suits users, and ready-made suits users. 2) the group who perceived performance risk as being the highest concern is the ready-made suits consumers, followed by system order user, and custom suits user. 3) the group who perceived the socio-psychological risk as the highest is the ready-made suits consumers, and followed by custom suits user and system order users. 4) there is no difference among the three groups with respect to the fashionability loss risk. 5) the group of the highest perceiving the useful loss risk is the ready-made suits consumers, and the next is system order users, custom suits users. 6) the group of the highest perceiving the time and convenience loss risk is ready-made suits users, and the next is system order users, custom suits users. 3. For the benefit sought, the group of the highest perceiving the aesthetics is custom suits consumers, and the next is system order users, ready-made suits users.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.9-17
• /
• 2015

The ISO 26262 standard requires a preliminary hazard analysis and risk assesment early in the development for automotive system. This is a first step for the development of an automotive system to determine the necessary safety measures to be implemented for a certain function. In this paper, we propose an ontology-based hazard analysis and risk assessment method for automotive functional safety. We use ontology to model the hazard and SWRL(Semantic Web Language) to describe risk analysis. The applicability of the proposed method is evaluated by the case study of an ESCL(electronic steering column lock) system. The result show that ontology deduction is useful for improving consistency and accuracy of hazard analysis and risk assessment.